Gray cast iron (GJL) remains widely used in automotive applications because of
its favorable lubrication behavior, thermal conductivity, and vibration damping,
which are particularly beneficial for reliable engine components. However,
lightweight and reliability design under cyclic loading remains challenging
because current standards and the literature do not adequately account for
statistical (component size), geometrical (notches), and technological
(microstructural) size effects on fatigue behavior.
A comprehensive experimental program investigated several GJL materials, specimen
geometries, and microstructures under cyclic loading to assess the material’s
reliability. The objective was to characterize fatigue strength more accurately
and to improve the reliability assessment of automotive components with fine and
coarse graphite configurations A and E. The fine and coarse E graphite exhibited
similar fatigue strengths, whereas fine A graphite sustained a local stress
amplitude approximately 30 MPa higher than that of coarse A graphite. The
measured mean stress sensitivity M exceeded the values specified in current
standards by 13–40%.
The results demonstrate that fatigue strength is governed not only by the highly
stressed volume but also by the microstructure and cross-sectional geometry. For
example, increasing the specimen diameter from 6 to 9 mm increased the fatigue
strength of fine A graphite. These findings provide a basis for more reliable,
lightweight, and material-efficient design of GJL automotive components.