Failure Modeling of Spot Welds Under Complex Combined Loading Conditions for Crash Applications
2002-01-2032
07/09/2002
- Event
- Content
- Experiments to obtain the failure loads of spot welds are first reviewed under combined opening and shear loading conditions. A failure criterion is then presented for spot welds under combined opening and shear loading conditions based on the results from the experiments and a lower bound limit load analysis. In order to account for spot welds under more complex loading conditions, another lower bound limit load solution is presented to characterize the failure loads of spot welds under combinations of three forces and three moments. Based on the limit load solution, an engineering failure criterion is proposed with correction factors determined by different spot weld tests. The engineering failure criterion can be used to characterize the failure loads of spot welds with consideration of the effects of sheet thickness, nugget radius and combinations of loads. Spot weld failure loads under uniaxial and biaxial opening loads and those under combined shear and twisting loads from experiments are shown to be characterized well by the engineering failure criterion.
- Pages
- 9
- Citation
- Lin, S., Pan, J., Tyan, T., and Prasad, P., "Failure Modeling of Spot Welds Under Complex Combined Loading Conditions for Crash Applications," SAE Technical Paper 2002-01-2032, 2002, https://doi.org/10.4271/2002-01-2032.