Road-induced vibration is a major contributor of vehicle ride quality and
occupant vibration exposure, particularly under transient and irregular road
excitation. The suspension damper plays a critical role in controlling the
transmission of these vibrations, while conventional dampers with fixed damping
characteristics may not provide optimum attenuation over a broad range of
excitation conditions. This study experimentally evaluates the vibration
attenuation performance of a frequency-adaptive damper (FAD) installed in a
large van and compares it with a conventional passive damping configuration
under discrete bump and unpaved-road excitation. Vehicle vibration was assessed
using frequency-weighted root mean square (wRMS) acceleration, vibration dose
value (VDV), vibration transmissibility, and power spectral density (PSD). A
DEP–CEEMDAN–MPE–based decomposition was additionally employed to identify ride
frequency vibration components and quantify the energy associated with the
resulting intrinsic mode functions (IMFs). Under bump excitation, the FAD
reduced the cervix-region wRMS, VDV, and axle-to-cervix transmissibility by
34.0%, 54.3%, and 33.5%, respectively, demonstrating substantial attenuation of
the transient vibration transmitted toward the occupant. Under unpaved-road
excitation, the FAD maintained consistent vibration attenuation, with reductions
of up to 16.7% in wRMS and 20.2% in VDV at the investigated occupant lumbar and
cervix spine locations. PSD and CEEMDAN analysis further indicated that the
attenuation was concentrated within important low-frequency vibration
components. The results demonstrate that frequency-adaptive damping technology
can provide improved vibration isolation under both transient and broadband road
excitation and can potentially enhance ride quality while reducing occupant
whole-body vibration exposure.