Effect of Forming Deformation on Corrosion Test Performance of Electroplated Zinc and Iron-Zinc Alloy Coatings for Automotive Sheet

862012

12/8/1986

Authors
Abstract
Content
The effect of forming deformation on the corrosion performance of electroplated zinc and iron-zinc alloy coated steel was investigated. The materials were tested with (1) no deformation, (2) moderate deformation, and (3) high deformation. The formed specimens were painted, scribed, and exposed in three corrosion tests. Although significant morphological change (cracking) occurred in the deformed surfaces, the results of the corrosion testing showed that the forming had no effect on cosmetic corrosion performance. A paint adhesion evaluation revealed that forming had no effect on the paint adhesion on carbon steel, but adhesion loss increased with increased deformation on the iron-zinc coated specimens and decreased with increased deformation on zinc coated specimens. Significantly, in nearly all cases, the actual loss of adhesion for the iron-zinc-alloy coated samples was less than that on the zinc-coated or carbon-steel samples.
Meta TagsDetails
DOI
https://doi.org/10.4271/862012
Citation
Vrable, J., "Effect of Forming Deformation on Corrosion Test Performance of Electroplated Zinc and Iron-Zinc Alloy Coatings for Automotive Sheet," 1986 SAE Automotive Corrosion and Prevention Conference and Exposition, Dearborn, Michigan, United States, December 8, 1986, https://doi.org/10.4271/862012.
Additional Details
Publisher
Published
12/8/1986
Product Code
862012
Content Type
Technical Paper
Language
English