Effect of a Split-Injection Strategy on the Atomisation Rate Using a High Pressure Gasoline DI Injector

2020-01-0322

04/14/2020

Features
Event
WCX SAE World Congress Experience
Authors Abstract
Content
The Gasoline direct-injection (GDI) engine can emit high levels of particulate matter and unburned Hydrocarbons when operating under stratified charge combustion mode. Injecting late in the compression stroke means the fuel has insufficient time to atomise and evaporate. This could cause fuel film accumulation on the piston surface and combustion liner. Locally fuel rich diffusion combustion could also result in the formation of soot particles. Employing a split-injection strategy can help tackle these issues. The first injection is initiated early in the intake stroke and could ensure a global homogeneous charge. The second injection during the compression stroke could help form a fuel-rich charge in the vicinity of the spark plug. Many studies have established the crucial role that a split-injection strategy plays in the stratified charge operation of GDI engines. The current study examines how a split-injection strategy affects the flow field and spray characteristics at high injection pressure. This is done by analysing the global spray structures and the atomisation rates. In particular, the effects of changing dwell times between injections on the spray characteristics of the second injections are evaluated. The experiments were conducted in a constant volume spray chamber. A multi-hole solenoid DI injector, with maximum injection pressure capability of 35MPa, was used to carry out the investigations. The spray characteristics were determined using high-speed imaging. The atomisation rates, breakup processes and droplet sizes were studied using Phase Doppler Particle Anemometry. Short and large pulse widths, in the range of 0.3ms to 0.8ms, were investigated.
Meta TagsDetails
DOI
https://doi.org/10.4271/2020-01-0322
Pages
16
Citation
Dhanji, M., and Zhao, H., "Effect of a Split-Injection Strategy on the Atomisation Rate Using a High Pressure Gasoline DI Injector," SAE Technical Paper 2020-01-0322, 2020, https://doi.org/10.4271/2020-01-0322.
Additional Details
Publisher
Published
Apr 14, 2020
Product Code
2020-01-0322
Content Type
Technical Paper
Language
English