Drop Impact Phenomena: An Experimental Study of Isooctane Interaction with Dry Walls and Liquid Films

In this study, high-speed back-illuminated imaging and laser-induced fluorescence (LIF) methods were employed to investigate the impingement behavior of millimeter-sized single isooctane drops on a dry solid wall and various liquid films, including isooctane and glycerol solution films of different concentrations. Various fuel spray impingement scenarios in gasoline direct injection engines were examined. High-speed back-illuminated imaging was primarily used to examine the impact of fuel drops on a dry wall and a fuel film of the same composition as the drops. The LIF method was used to examine the impact of fuel drops on the glycerol solution film, allowing for the distinction between fuel drops and the glycerol solution film. The impingement behavior varied depending on the Weber number of the incident drop and the wall condition. When fuel drops impacted the solid dry wall vertically, they spread into a circular liquid film. The outer edge of the liquid film folded and bulged, and upon reaching the maximum spreading diameter, it maintained equilibrium and did not retract. When isooctane fuel drops impacted the isooctane film, they broke and splashed, with thinner films producing stronger splashes. Additionally, the Weber number of the fuel drops significantly influenced the crown shape and splashing after impact. The impingement behavior of fuel drops on the glycerol solution film was also investigated, focusing on the liquid film morphology after impact. Based on the experimental data, empirical correlations were established between the critical Weber numbers for transitions among different crown morphologies and the dimensionless film thickness under varying film viscosities.