Contact Mechanics and Release Dynamics Analysis of the Test Mass

2026-99-2332

10/30/2026

Authors
Abstract
Content
The test mass is a cube made of a gold-platinum alloy that serves as the inertial reference for space-borne gravitational wave detection; its final residual velocity after locking and release must not exceed 5 μm/s. During the release process, multi-degree-of-freedom disturbances caused by the pull-off effect between the release mechanism and the test mass are the key factors affecting the residual velocity of the test mass. This paper focuses on the designed release mechanism to conduct research on the interaction relationship between it and the test mass. Three contact configurations are proposed, and corresponding contact mechanics models are established to analyze the impact of release on test mass disturbances under plunger offset and deflection, leading to the selection of the optimal configuration. Based on adhesion effects, a one-dimensional impulse transfer model and Lagrange dynamic equations are constructed to analyze the disturbance transfer mechanism during the release process. Minimal release impulse is achieved through systematic parameter optimization. It is concluded that the plunger-sphere/test-mass-plane configuration is optimal for disturbance decoupling and technical feasibility, with an optimized plunger radius of 10 mm and mass of 0.8 g, which significantly reduces adhesion and residual preload. Furthermore, simulation verification demonstrates that the residual velocity of the test mass after release is on the order of 10^–7 m/s, satisfying the low-disturbance requirements. The aforementioned conclusions provide significant theoretical support and design references for enhancing the release success rate of test mass release mechanisms and reducing release residual velocity.
Meta TagsDetails
DOI
https://doi.org/10.4271/2026-99-2332
Citation
Kang, M., Si, J., Ouyang, J., Lu, Y., et al., "Contact Mechanics and Release Dynamics Analysis of the Test Mass," 2026 2nd International Conference on Aerospace Engineering and Materials Technology, Xi'An, China, April 10, 2026, https://doi.org/10.4271/2026-99-2332.
Additional Details
Publisher
Published
Oct 30
Product Code
2026-99-2332
Content Type
Technical Paper
Language
English