Computational Simulation of Adhesively Bonded Aluminum Hat Sections Under Plastic Buckling Deformation
2000-01-2703
10/03/2000
- Event
- Content
- Light-weight adhesively bonded aluminum hat sections under axial compression can be used for energy absorption as a crash component in the vehicle. In order to obtain a comprehensive evaluation on safety and performance of this type of structure, the roles of adhesives as well as the aluminum adherend were investigated, and it was necessary to establish an appropriate FEA model which can be used for structural failure prediction and energy absorption response. It was found that the global behavior of short length adhesively bonded hat sections under axial compression is primarily governed by large plastic buckling deformation, and that the main contribution of the adhesive is to present separation of the flanges and corresponding reductions of effective flange thickness.This paper examines several different ABAQUS finite element modeling approaches so as to finalize the optimum element configurations which can be employed to deal with large quasi-static buckling deformations when structural failure has to be considered and global deformation behavior is to be predicted. In the simulation, both material and geometry nonlinearity was taken into account. Global load response from the computational simulation was compared with that of axial compression tests.
- Pages
- 8
- Citation
- Lu, J., Newaz, G., and Gibson, R., "Computational Simulation of Adhesively Bonded Aluminum Hat Sections Under Plastic Buckling Deformation," SAE Technical Paper 2000-01-2703, 2000, https://doi.org/10.4271/2000-01-2703.