CFD Investigation of Oil Ingestion and Aeration in a V6 Engine Oil Pan During Vehicle Maneuvers

A computational investigation was carried out using SimericsMP+ to analyze oil distribution and aeration behavior in a V6 engine oil pan during severe vehicle maneuvers. The model accounted for the crankshaft/camshaft rotations and piston motions, which allows for capturing realistic oil distribution in cylinder head drainbacks, engine bay and sump after initializing the crankcase with prescribed oil levels to establish baseline aeration prior to applying dynamic maneuver profiles. Of particular interest was the response of the main oil gallery (MOG) pressure and the exposure of the oil pickup tube during kickoff conditions at multiple fill levels. Both a baseline configuration and a modified sump featuring a containment “doghouse” were examined. Results obtained from the kickoff maneuver show complete uncovering of the pickup tube in the baseline design, leading to unstable lubrication. The first doghouse design only delayed pickup tube uncovering briefly, as oil pooled at the rear gap and air ingestion still occurred. Full fill avoids air ingestion; however, high interaction with the crank shaft results in higher oil aeration longer term after kickoff maneuver ends. The findings highlight the complexity of oil behavior in engine environments, where unpredictable interactions during dynamic maneuvers can easily lead to ingestion and aeration. Despite this complexity, the computational strategy developed in this study was able to accurately reproduce and predict these events which were seen in the test scenario as well in the form of pressure readings at the pump inlet. Since these high-aeration events were validated against experimental measurements, this simulation approach proves to be highly valuable for guiding product design and optimization, allowing engineers to identify risks early and improve lubrication performance in the engines before physical testing.