Dielectric elastomers (DEs) have attracted extensive attention in vibration control because of their large strain, fast response, light weight, and low power consumption. Particularly in highly sensitive engineering fields such as aerospace payload stabilization, semiconductor lithography, and ultra-precision optical instruments, there is an urgent demand for lightweight and efficient active vibration isolation systems. However, the strong nonlinear electromechanical coupling, viscoelasticity, and limited output capability of conventional single-layer structures still restrict their application in low-frequency active vibration isolation. In this paper, a bias-type multilayer silicone dielectric elastomer actuator (DEA) is proposed to improve displacement output and reduce driving voltage through the combination of structural biasing and multilayer stacking. A nonlinear electromechanical model based on the Gent hyperelastic law is established to characterize the coupled effects of voltage, pre-stretch, damping, stiffness, and payload mass. A three-layer DEA is fabricated using Ecoflex 0030, Sylgard 184, and carbon nanotube (CNT) compliant electrodes through a wet-stacking and spin-coating process. Experimental results show that the multilayer structure enhances actuation performance and provides stable static and dynamic response characteristics. An active vibration isolation system is further implemented using adaptive feedforward control with the Fx-LMS algorithm. The proposed system achieves vibration attenuation of 24.53 dB at 8 Hz, 18.22 dB at 16 Hz single-frequency disturbance. The results demonstrate that the proposed DEA is a feasible and effective solution for low-frequency active vibration control, holding significant promise for enhancing the operational stability and precision of high-end manufacturing equipment and next-generation space exploration systems.