Aerodynamic Design of Ultra-Highly Loaded and Low Rotating Speed Ducted Fan

2026-99-2508

11/20/2026

Authors
Abstract
Content
Lowering the rotational speed of a fan rotor helps reduce both fan noise and the structural strength requirements for the rotor. To achieve a reduction in the fan rotor's rotational speed, an ultra-highly loaded aerodynamic design is applied to an electric drive ducted fan rotor, utilizing a diffuser blade profile characterized by a high camber angle accompanied by low loss. This blade shape is employed to enhance the prototype fan rotor, enabling ultra-highly loaded operation at a low rotational speed. The findings indicate that with decreasing rotational speed, the load coefficient gradually rises, there is an increase in the rotor camber angle, and a decrease in the outlet relative flow angle. However, at the same time, the stator inlet Mach number increases, and the flow turning angle becomes larger, leading to greater flow losses and increased difficulty in stator design. While maintaining the flow rate and pressure ratio identical to the prototype rotor at the design point, the rotational speed is reduced from 3900 rpm to 1676 rpm (reduced to 43.0% of the prototype rotor’s rotating speed); at the design point, the rotor efficiency is 0.9450, and the stall margin is 127.76%, so it has high efficiency and a large stall margin. A stator matched with the rotor is designed to compose the fan stage with ultra-high load and low rotating speed. At the design point, the fan stage efficiency is 0.8766, with a total pressure ratio of 1.0201; the design targets are met, and the stall margin is very high at 53.73%. Due to the convergence of the rear part of the ducted fan rotor blade passage with ultra-highly loaded conditions, the flow separation is not easy to occur under high back pressure, and the stator’s angle of attack is small. Therefore, the stator separation on the suction surface is suppressed, and the stall margin is much higher.
Meta TagsDetails
DOI
https://doi.org/10.4271/2026-99-2508
Citation
Liu, E. and Zhou, Z., "Aerodynamic Design of Ultra-Highly Loaded and Low Rotating Speed Ducted Fan," 2026 5th International Conference on Aerospace, Aerodynamics and Mechatronics Engineering (AAME2026), Nanchang, China, April 17, 2026, https://doi.org/10.4271/2026-99-2508.
Additional Details
Publisher
Published
10 hours ago
Product Code
2026-99-2508
Content Type
Technical Paper
Language
English