The transition toward energy-efficient and NVH-refined thermal management in IC engine vehicles has increased the need for continuously controllable cooling actuators capable of matching real-time thermal demand. This paper presents a simulation-driven and experimentally validated Brushless Direct Current (BLDC) radiator fan control strategy for automotive engine cooling applications, with specific implementation on the engine platform used in passenger vehicles.
One-dimensional (1D) steady-state simulations were carried out using KULI thermal simulation software to assess cooling system behaviour across representative operating conditions. State-defining variables used in the simulation framework included vehicle speed, engine load, coolant temperature, ambient temperature, and air-conditioning (AC) status. Engine heat-rejection loads applied as boundary conditions were derived from engine test-bed measurements, ensuring physically realistic thermal inputs across the operating envelope.
Based on the simulated thermal states and corresponding airflow demand, optimal fan operating regimes were identified and mapped to continuously variable speed profiles through a Pulse Width Modulation (PWM) control strategy. Unlike conventional two-speed brushed fans, the BLDC system enables precise speed modulation aligned with instantaneous cooling requirements, thereby preventing overcooling and avoiding unnecessary electrical energy consumption.
To validate the simulation-driven control logic, experimental trials were conducted by actuating the BLDC fan using externally generated PWM signals at duty cycles defined through simulation. Results demonstrated strong correlation between simulated and measured thermal and electrical responses under steady-state operating conditions. A reduction in fan noise levels from approximately 68 dB (brushed) to below 65 dB (BLDC). Durability assessments indicate a 2.5-fold improvement in motor life, with BLDC rated at 5,000 hours versus 2,000 hours for brushed DC motors.
The study establishes a systematic workflow integrating 1D thermal simulation, test-bed-derived thermal loads, and controlled PWM-based experimental validation to enable the development of scalable, efficient, and intelligent thermal management solutions for IC engine passenger vehicles.