This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Gland Design Criteria and Dimensions for Dynamic Radial O-Ring Seal Applications Specifically for Engine and Engine Control Systems Operating at 1500 psi Max
- Aerospace Standard
- ARP1233B
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This document recommends standard gland design criteria and dimensions for dynamic radial O-ring seal applications specifically for engine and engine control systems operating at pressures up to a maximum of 1500 psi (10342.14 kPa) and provides recommendations for modifying these glands in special applications. There are no provisions in this document for anti-extrusion devices.
NOTE: The criteria set forth here are similar to but not identical with those in MIL-G-5514 and AS4716. This document is not intended to replace MIL-G-5514 or AS4716 for hydraulic applications.
Rationale
This standard has been updated to include technical and editorial changes.
NOTE: This standard was transferred from the E-25 General Standards for Aerospace and Propulsion Systems Committee to the A-6C Seals Committee.
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Table 1A | Standard gland dimensions in inches | |
| Table 1A | Standard gland dimensions in inches (continued) | |
| Table 1A | Standard gland dimensions in inches (continued) | |
| Table 1A | Standard gland dimensions in inches (continued) | |
| Table 1A | Standard gland dimensions in inches (continued) | |
| Table 1A | Standard gland dimensions in inches (continued) | |
| Table 1A | Standard gland dimensions in inches (continued) | |
| Table 1B | Standard gland dimensions in millimeters | |
| Table 1B | Standard gland dimensions in millimeters (continued) | |
| Table 1B | Standard gland dimensions in millimeters (continued) | |
| Table 1B | Standard gland dimensions in millimeters (continued) | |
| Table 1B | Standard gland dimensions in millimeters (continued) | |
| Table 1B | Standard gland dimensions in millimeters (continued) | |
| Table 1B | Standard gland dimensions in millimeters (continued) | |
| Table 2 | O-ring seal squeeze | |
| Table 3A | Diametral clearances in inches | |
| Table 3B | Diametral clearances in mm |
Issuing Committee
A6C2 is responsible for the development of standards, processes, and practices related to Seals, Scrapers and Bearings used in actuation systems for Commercial and Military air vehicles. The panel provides a forum for government engineers, prime contractors, OEMs and suppliers to exchange technical information, regulatory updates, recent technology developments, issues related to system development and in service operation and lessons learned.
Reference
| Number | Title |
|---|---|
| ANSI/B46.1 | This document is not part of the subscrption. |
| ARP1231 | GLAND DESIGN, ELASTOMERIC O-RING SEALS, GENERAL CONSIDERATIONS |
| ARP1232 | GLAND DESIGN, ELASTOMERIC O-RING SEALS, STATIC RADIAL |
| AS568 | AEROSPACE SIZE STANDARD FOR O-RINGS |
| MIL-G-5514 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.