Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

SAE International Journal of Advances and Current Practices in Mobility

ISSN: 2641-9637, e-ISSN: 2641-9645

Open Access Articles

Open Access

Open Access articles are permanently free for everyone to read and download. SAE International offers authors a choice of user licenses (indicating the type of license on the first page of the article), which define the permitted reuse of articles, according to the following options:

  • Creative Commons Attribution (CC BY): Allows users to copy, distribute, transmit, and adapt the article as long as the author is attributed. CC BY permits commercial and non-commercial use.
  • Creative Commons Attribution-NonCommercial (CC BY-NC): Allows users to copy, distribute, and transmit the article as long as the author is attributed. CC BY-NC allows only non-commercial use.
  • Creative Commons Attribution-NonCommercial-NoDerivatives (CC BY-NC-ND): Allows users to copy, distribute, and transmit an article as long as the author is attributed, the article is not used for commercial purposes, and the work is not modified or adapted in any way.
2022-03-29
A Review of Current Understanding of the Underlying Physics Governing the Interaction, Ignition and Combustion Dynamics of Multiple-Injections in Diesel Engines
2022-03-29
Construction of Personalized Driver Models Based on LSTM Using Driving Simulator
2022-03-29
Development of a Ceramic EHC
2022-08-30
Fuel and Recharging Effects on Regulated and Unregulated Emissions from a Gasoline and a Diesel Plug-In Hybrid Electric Vehicle
2022-08-30
Development and Application of an Engine Test Method to Rate the Internal Injector Deposit Formation of Diesel Fuels and Additives
2022-08-30
Numerical Study of the Impinging Jets Formed by an Injector with Different Nozzle Diameters
2022-01-09
Hot Surface Assisted Compression Ignition (HSACI) as an Approach to Extend the Operating Limits of a Natural Gas Fueled HCCI Engine
2022-01-09
Extension of the Lean Limit of Gasoline Engines Under Part Load by Using Hot Surface Assisted Spark Ignition (HSASI)
2019-04-02
An Investigation of the Influence of Close-Proximity Traffic on the Aerodynamic Drag Experienced by Tractor-Trailer Combinations
2019-04-02
Investigation of Drag Reduction Technologies for Light-Duty Vehicles Using Surface, Wake and Underbody Pressure Measurements to Complement Aerodynamic Drag Measurements
2019-09-09
Cylinder Pressure Based Method for In-Cycle Pilot Misfire Detection
2021-10-11
Development of an Optimized Rotary Screw Air Compressor for the Electrical Vehicle Air Brake Systems/Suspension Systems on Trucks and Buses
2020-04-14
Impact of Mixed Traffic on the Energy Savings of a Truck Platoon
2020-04-14
Feedback Control of Synchronizers for Reducing Impacts during Sleeve to Gear Engagement
2020-04-14
Spatially Optimized Diffusion Alloys: A Novel Multi-Layered Steel Material for Exhaust Applications
2020-04-14
Non-Contacting Finger Seal Piston for Oil Less Engines
2021-03-02
Development of a Non-Parametric Robot Calibration Method to Improve Drilling Accuracy
2021-04-06
Some Basic Investigations into the Principles of Race Bike Aerodynamics for Real-World Racetrack Scenarios
2020-09-27
On the Effects of Turbocharger on Particle Number and Size Distribution in a Heavy - Duty Diesel Engine
2020-10-05
Wear Evaluation of Niobium-Added Cast Iron for Brake Disc and Drum Applications
2020-09-30
Characterization of Brake Creep Groan Vibrations
2022-03-29
Optimal Chassis Suspension Design for Towbarless Towing Vehicle for Aircraft Taxiing
2022-03-29
Approaches for Simulation Model Reuse in Systems Design — A Review
2022-03-29
Development of a Series Hybrid Electrified Powertrain for a High Speed Tracked Vehicle Based on Driving Cycle Simulation
2022-03-29
Axial Turbine Turbocharger for Charging a Lean-Burn Gasoline Engine
2022-03-08
Dynamics of the Ammonia Spray Using High-Speed Schlieren Imaging
2022-03-29
True Fracture Strain Measurement and Derivation for Advanced High-Strength Steel Sheets
2022-03-29
Influences of Martensite Morphology and Precipitation on Bendability in Press-Hardened Steels
2022-03-29
Nonlinear Multi-Fidelity Bayesian Optimization: An Application in the Design of Blast Mitigating Structures
2022-03-29
Development of a Generalized Model to Predict Efficiency of Electrified Power Transmission Considering Optimal Driving Efficiency
2022-03-29
Applying Physics-Informed Enhanced Super-Resolution Generative Adversarial Networks to Large-Eddy Simulations of ECN Spray C
2021-04-06
Near-to-Far Wake Characteristics of Road Vehicles Part 1: Influence of Ground Motion and Vehicle Shape
2021-03-02
A Risk Assessment of an Airborne Disease inside the Cabin of a Passenger Airplane
2021-04-06
Multilevel Design of Sandwich Composite Armors for Blast Mitigation using Bayesian Optimization and Non-Uniform Rational B-Splines
2020-04-14
Investigation of the Effect of Tire Deformation on Open-Wheel Aerodynamics
2020-09-30
Squeak Noise Prediction of a Door Trim Panel Using Harmonic Balance Method
2020-09-15
Low-Pressure Injection of Water and Urea-Water Solution in Flash-Boiling Conditions
2020-09-15
Development of an Engine Test to Rate the EGR Deposit Formation Propensity of Fuels in Light-Duty Diesel Engines
2020-09-15
Fuel Effects on Regulated and Unregulated Emissions from Three Light-Duty Euro 5 and Euro 6 Diesel Passenger Cars
2020-09-15
A Batch Blending System for Continuous Production of Multi-Component Fuel Blends for Engine Laboratory Tests
2021-04-06
Track-Based Aerodynamic Testing of a Two-Truck Platoon
2021-04-06
Near-to-Far Wake Characteristics of Road Vehicles Part 2: Influence of Cross Winds and Free-Stream Turbulence
2021-04-06
Near-to-Far Wake Characteristics of Road Vehicles Part 3: Influence of Multi-Vehicle Interactions
2023-04-11
Understanding Hydrocarbon Emissions to Improve the Performance of Catalyst-Heating Operation in a Medium-Duty Diesel Engine
2023-04-11
Optical Investigation of Mixture Formation in a Hydrogen-Fueled Heavy-Duty Engine with Direct-Injection
2023-04-11
Exploring the EGR Dilution Limits of a Pre-Chamber Ignited Heavy-Duty Natural Gas Engine Operated at Stoichiometric Conditions - An Optical Study
2023-04-11
The Influence of Traffic Wakes on the Aerodynamic Performance of Heavy Duty Vehicles
2023-04-11
Simulating Traffic-wake Effects in a Wind Tunnel
2023-04-11
Aerodynamic Drag of Road Vehicles in Close Lateral Proximity
2022-03-29
The Missing Link: Developing a Safety Case for Perception Components in Automated Driving
2020-04-14
Driving Safety Performance Assessment Metrics for ADS-Equipped Vehicles
2021-04-06
Optimization of Antenna Coupling through Machine Learning for “Smart” TPMS Readers
2022-03-29
Towards Brand-Independent Architectures, Components and Systems for Next Generation Electrified Vehicles Optimised for the Infrastructure
2021-04-06
Fail-Safe Study on Brake Blending Control
2021-04-06
E-Mobility-Opportunities and Challenges of Integrated Corner Solutions
2020-04-14
Modes of Automated Driving System Scenario Testing: Experience Report and Recommendations
2021-04-06
3D-3D Self-Calibration of Sensors Using Point Cloud Data
2021-04-06
Analysis and Interpretation of Data-Driven Closure Models for Large Eddy Simulation of Internal Combustion Engine
2023-04-11
Numerical Analysis of Combustion Process in the Dual Fuel Internal Combustion Engine
Published volumes

Indexed in:

CNKI
Engineering Village (Ei Compendex)
IET Inspec
Japan Science and Technology (JST) Agency
Scopus

SAE International Journal of Advances and Current Practices in Mobility