This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Brake System Rating Test Code - Commercial Vehicles
- Ground Vehicle Standard
Published October 05, 2011 by SAE International in United States
Downloadable datasets availableAnnotation ability available
This code is intended for commercial vehicles over 4500 kg (10 000 lb) with brake systems having typical service pressure ranges 0 to 14.1 mPa (0 to 2050 psi) hydraulic or 0 to 830 kPa (0 to 130 psi) air and is not directly applicable to vehicles with other systems. Air over hydraulic systems are to be tested as air systems.
All of the revisions, updates, and corrections to this RP, although many, are clearly editorial in nature, and do not generate any substantive changes to the methodology and procedures of this RP. Figure 2, which may exhibit a somewhat different appearance, is identical to the previous Figure 2, except for the revisions and corrections required to address the various errors and omissions. The different appearance is due exclusively to the fact that the Figure had to be recreated from scratch, instead of just modifying the existing Figure.
|Ground Vehicle Standard||Brake Force Distribution Performance Guide - Truck and Bus|
|Technical Paper||Truck Hub Units - A New Concept for Wheel Bearing Arrangements|
Data Sets - Support Documents
|Unnamed Dataset 1|
|TABLE 1||BRAKE APPLY TIME SCHEDULE FOR VARIOUS TOTAL NUMBER OF RATING TEST BRAKE SNUBS TOTAL NUMBER OF BRAKE SNUBS (CYCLE TIME, S)|
Truck and Bus Brake Systems Committee
The Truck and Bus Brake Systems Committee of the Truck and Bus Brake and Stability Control Steering Committee is responsible for developing, reviewing, and approving recommended practices, standards, and information reports related to brake systems of trucks, tractor-trailer combinations and buses over 10,000 lbs (4500 Kg) GVWR designed primarily for highway use.
|J1505_201107||Brake Force Distribution Test Procedure - Trucks and Buses|
|J1505_202210||Brake Force Distribution Test Procedure - Trucks and Buses|
|J257_201108||Brake Rating Power Requirements—Truck and Bus|
|J257_201907||Brake Rating Power Requirements - Truck and Bus|
|J843||This document is not part of the subscrption.|
|J843_201303||Brake System Road Test Code - Passenger Car and Light-Duty Truck|
|J971||This document is not part of the subscrption.|
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.