This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Fuel and Oil Hoses
- Ground Vehicle Standard
- J30_201202
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE standard covers fuel, oil, or emission hose for use in coupled and uncoupled applications, for use with gasoline, oil, diesel fuel, lubrication oil, or the vapors present in either the fuel system or in the crankcase of internal combustion engines in mobile or stationary applications. This standard covers the hose portion only. If assembly / coupling is required, that is to be agreed to between the customer and assembler, along with the specific requirements.
Rationale
This specification was revised to add Type 13 Diesel and Biodiesel Fuel Feed and Return Hose to the sections and Tables.
Table 4 Dimensions for Hose Flexibility Test was added.
Recommended Content
| Journal Article | Experimental Study on Elastomer Compatibility with Ethanol-Gasoline Blends |
| Ground Vehicle Standard | Calibration Fluid for Diesel Injection Equipment |
| Technical Paper | Some Comparative Chemical, Physical and Compatibility Properties of Sasol Slurry Phase Distillate Diesel Fuel |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| TABLE 1 | APPLICATION SELECTION GUIDE | |
| Unnamed Dataset 4 | ||
| TABLE 1A | DIMENSIONS AND TOLERANCES FOR SAE 30R2 | |
| TABLE 1B | DIMENSIONS AND TOLERANCES FOR SAE 30R3 | |
| TABLE 1C | DIMENSIONS AND TOLERANCES FOR SAE 30R5 | |
| TABLE 1D | LENGTH TOLERANCES FOR SAE 30R2, R3, AND R5 | |
| TABLE 1E | DIMENSIONS AND TOLERANCES FOR SAE 30R6, R7, R8, R9, R10, R11, R12, R13 AND R14 | |
| TABLE 1F | CUT OR LONG LENGTH TOLERANCES FOR SAE 30R6, R7, R8, R9, R10, R11, R12, R13 AND R14 | |
| TABLE 2 | ELASTOMER SPECIFICATION REQUIREMENTS | |
| TABLE 2 | ELASTOMER SPECIFICATION REQUIREMENTS | |
| TABLE 2 | ELASTOMER SPECIFICATION REQUIREMENTS | |
| TABLE 2 | ELASTOMER SPECIFICATION REQUIREMENTS | |
| TABLE 3 | DYNAMIC HOSE PROPERTIES - SAE J30 FUEL AND OIL HOSE BURST, WORKING PRESSURE, AND CHANGE IN LENGTH | |
| TABLE 3 | DYNAMIC HOSE PROPERTIES - SAE J30 FUEL AND OIL HOSE BURST, WORKING PRESSURE, AND CHANGE IN LENGTH | |
| TABLE 3 | DYNAMIC HOSE PROPERTIES - SAE J30 FUEL AND OIL HOSE BURST, WORKING PRESSURE, AND CHANGE IN LENGTH | |
| Unnamed Dataset 18 | ||
| Unnamed Dataset 19 | ||
| Unnamed Dataset 20 | ||
| Unnamed Dataset 21 | ||
| Unnamed Dataset 22 | ||
| TABLE 4 | DIMENSIONS FOR HOSE FLEXIBILITY TEST | |
| TABLE 5 | CONTROL ROD DIMENSIONS | |
| TABLE 6 | TEST PIECE SIZE PARAMETERS | |
| TABLE 7 | KINK RESISTANCE | |
| TABLE 8 | R11 AND R12 SUFFIX DEFINITIONS | |
| Unnamed Dataset 28 | ||
| TABLE 9 | R13 SUFFIX DEFINITIONS | |
| TABLE 10 | R14 SUFFIX DEFINITIONS | |
| Unnamed Dataset 31 | ||
| Unnamed Dataset 32 |
Issuing Committee
The Non-Hydraulic Hose Committee develops and maintains SAE Standards, Recommended Practices, Information Reports and appropriate manuals relating to the development of non-hydraulic thermoset and thermoplastic elastomeric hose specifications, such as those used in cooling, fuel, oil, fuel vapor, air management, windshield washer (tubing) and refrigerant systems, which can be either mobile or stationary applications. The task forces formed under the committee's direction include: Low Permeation J2416 Diesel Fuel Hose Fuel Cell/Hybrid Vehicle Hoses Test Method for Non-Conductive Coolant Hose Cover Participants in the SAE Non-Hydraulic Hose Committee include OEMs, suppliers, consulting firms, government and other interested parties.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.