This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
PIN, EXPANSION - ALUMINUM, 2024-T4), SHORT
- Aerospace Standard
- AS3124
- Reaffirmed
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
THIS DOCUMENT HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE 5-YEAR REVIEW POLICY.
-
1
MATERIAL: AMS 4120 (AL ALLOY 2024-T4).
-
2
FINISH: MIL-C-5541 (CHEMICAL FILM) DYED YELLOW.
-
3
PINS ARE PREWAXED TO AID DRIVING.
-
4
SURFACE TEXTURE: SYMBOLS PER ANSI Y14.36-1978, REQUIREMENTS PER ANSI B46.1-1978. UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 250 MICROINCHES Ra.
-
5
BREAK EDGES .003-.015 UNLESS OTHERWISE SPECIFIED.
-
6
DIMENSIONS IN INCHES UNLESS OTHERWISE SPECIFIED, TOLERANCE : ANGULAR DIMENSIONS ±2°. DIMENSIONS APPLY AFTER FINISH.
-
7
MARK PART NUMBER AND MANUFACTURER'S IDENTIFICATION ON PACKAGE.
-
8
USE WITH AS 3123 PLUGS. SEE AIR 3277 INSTALLATION PROCEDURES.
-
9
DIMENSIONING AND TOLERANCING: ANSI Y14.5-1973.
-
10
DO NOT USE UNASSIGNED PART NUMBERS.
-
APPROVED SOURCE OF SUPPLY:THE LEE COWESTBROOK, CTFEDERAL SUPPLY CODE FOR MANUFACTURER'S NO 92555.
-
ONLY THE ITEM DESCRIBED ON THIS DRAWING WHEN PROCURED FROM THE VENDOR LISTED HEREON IS APPROVED FOR USE IN THE APPLICATIONS SPECIFYING THIS AEROSPACE STANDARD IDENTIFICATION NUMBER. A SUBSTITUTE ITEM SHALL NOT BE USED WITHOUT PRIOR TESTING AND APPROVAL BY THE DESIGN ACTIVITY RESPONSIBLE FOR THE APPLICATION.
-
IDENTIFICATION OF THE APPROVED SOURCE HEREON IS NOT TO BE CONSTRUED AS A GUARANTEE OF PRESENT OR CONTINUED AVAILABILITY AS A SOURCE OF SUPPLY FOR THE ITEM DESCRIBED ON THE DRAWING.
Recommended Content
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.