This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Groove Design, Metal O-Ring Gasket
- Aerospace Standard
- ARP674D
- Stabilized
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
Groove designs presented herein are applicable for use with the following "MS" metal O-ring gaskets conforming to the applicable "AS" standard drawings listed in 1(a) or 1(b), or to dimensionally equivalent gaskets of other materials:
-
a
AMS 5570 or AMS 5576 Plain
-
1
AS9141 - 0.035 tube × 0.006 wall
-
2
AS9142 - 0.062 tube × 0.006 wall
-
3
AS9202 - 0.062 tube × 0.010 wall
-
4
AS9203 - 0.094 tube × 0.006 wall
-
5
AS9204 - 0.094 tube × 0.010 wall
-
6
AS9205 - 0.125 tube × 0.010 wall
-
1
-
b
AMS 5570 or AMS 5576 Silver Plated
-
1
AS9371 - 0.035 tube × 0.006 wall
-
2
AS9372 - 0.062 tube × 0.006 wall
-
3
AS9373 - 0.062 tube × 0.010 wall
-
4
AS9374 - 0.094 tube × 0.006 wall
-
5
AS9375 - 0.094 tube × 0.010 wall
-
6
AS9376 - 0.125 tube × 0.010 wall
-
1
NOTE: The term "AS gasket" as used in this document refers to the 'MS' part numbers defined on the applicable 'AS' standards listed in 1(a) or 1(b).
Rationale
This document has been determined to contain basic and stable technology which is not dynamic in nature.
Recommended Content
| Aerospace Standard | GASKET - METAL 0-RINGS, .094 TUBE X .006 WALL, CRES - UNS S32100 |
| Aerospace Standard | GASKET - METAL O-RING, .094 TUBE X .010 WALL, CRES - UNS S32100 |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| TABLE 1 | Dimensions for Grooves Shown in and | |
| TABLE 2 | Type 2 Groove, Load to Compress Gasket |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.