This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Galvanneal Powdering in Drawbeads
Annotation ability available
Sector:
Language:
English
Abstract
Coating mass losses occurring on two galvannealed sheet steel samples, one with and one without significant amounts of zeta in the coating, were measured in draw bead simulator tests at different bead penetrations, sliding speeds and with different amounts of oil on the surface. Coating mass losses were small relative to the coating weight. The galvanneal coating without zeta exhibited a greater mass loss than the coating with zeta. Bead penetration was an important variable affecting coating mass loss in both coils, and through an interaction with sliding speed in one coil. Compressive strains due to bending and unbending are the primary cause for coating mass loss; sliding friction did not enhance coating mass loss. The quantitative results are compared with coating mass losses that occur in other formability tests.
Recommended Content
Authors
Citation
Rangarajan, V., "Galvanneal Powdering in Drawbeads," SAE Technical Paper 970150, 1997, https://doi.org/10.4271/970150.Also In
References
- Jagannathan, V. “Emerging Technologies in the Hot-Dip Coating of Automotive Sheet Steel” JOM 45 8 48 51 1993
- Gray, B. M. Belleau C. D'Amico M. A. Pyle R. L. Butler J. F. “Development of Hot-Dip Zn-Fe Alloy Coated Steels for Exposed Automotive Applications” 1989 Mechanical Working and Steel Processing Proceedings 3 15 ISS Warrendale, PA 1989
- Kalson, A. M. Jr. “Coated Steel Sheets in North America - An Automotive Perspective” Proceedings of The International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech) , 271 277 The Iron and Steel Institute of Japan Tokyo, Japan 1989
- Jagannathan, V. “The Influence of Coating Characteristics on the Powdering and Corrosion Resistance of Galvanneal Coated Steel Sheet” 2nd International Conference on Zinc and Zinc Alloy Coated Steel Sheet 127 131 Verlag Stahleisen mbH Dusseldorf, Germany 1992
- Cheng, C. Rangarajan V. Franks L. L'Ecuyer J. “The Effect of Steel Substrate on the Microstructure and Powdering of Galvanneal Coatings” 2nd International Conference on Zinc and Zinc Alloy Coated Steel Sheet 122 126 Verlag Stahleisen mbH Dusseldorf, Germany 1992
- Chou, K-C. Jagannathan V. “Corrosion and Powdering Resistance of Galvanneal For Automotive Applications” Corrosion 91 NACE Houston, TX 1991
- Rangarajan, V. Jagannathan V. Raghavan K. S. “Influence of Strain State on Powdering of Galvannealed Sheet Steel” New Steel Products and Processing for Automotive Applications 63 70 SAE International Warrendale, PA 1996
- Urai, M. Iwaya J. Arimura M. Sakai H. Miyahara M. “Effects of Forming Conditions on Exfoliation of Galvannealed Steel Sheet” Kobelco Technology Review 11 38 42 1991
- Rangarajan, V. Matlock D. K. Krauss G. “The Effects of Coating Properties on the Frictional Response of Zinc-Coated Sheet Steels” Zinc-Based Steel Coating Systems: Metallurgy and Performance 263 280 The Minerals, Metals & Materials Society Warrendale, PA 1990
- Urai, M. Arimura M. Sakai H. Nomura S. “Effects of Galvanizing and Galvannealing Conditions on Powdering Characteristics of Galvannealed Steel Sheet” Kobelco Technology Review 19 27 30 1996
- Mataigne, J-M. Drillet P. Prat J-M. Mareuse D. Terreaux P. Guttmann M. “Optimized Galvannealed Coating Microstructure for Automotive Applications” Galvatech '95 Conference Proceedings 589 597 ISS Warrendale, PA 1995
- Urai, M. Arimura M. Sakai H. “Flaking Behavior of Galvannealed Steel Sheet” 2nd International Conference on Zinc and Zinc Alloy Coated Steel Sheet 117 121 Verlag Stahleisen mbH Dusseldorf, Germany 1992
- Kilpatrick J. R. “A New Etching Technique for Galvanneal and Hot-Dipped Galvanized Coatings” Practical Metallography 28 649 658 1991
- Nine, H. “Drawbead Forces in Sheet Metal Forming” Mechanics of Sheet Metal Forming Koistinen D. P. Wang N. M. 179 211 Plenum Publishing Corporation New York, N.Y 1978
- Mackiowak, J. Short N. R. “Metallurgy of Galvanized Coatings” International Metals Reviews 24 1979 1 19
- Nakamori, T. Shibuya A. “Effects of Galvannealing Conditions and Coating Weight on Powdering Resistance of Galvannealed Steel Sheet” Corrosion-Resistant Automotive Sheet Steels Allegra L. 139 149 ASM International Metals Park, OH 1988
- Kubaschewski, O. Iron-Binary Phase Diagrams 172 175 Springer-Verlag New York 1982