This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Applications of a Binder Wrap Calculation Model to Layout of Sheet Steel Forming Dies
Annotation ability available
Sector:
Language:
English
Abstract
This paper presents applications of a binder wrap calculation model to several experimental sheet steel forming dies. In one application of a doubly curved die, the calculated binder wrap agrees with physical tests and calculations reported elsewhere. In another door inner panel die, the designer's intent of having more material in certain part of the die cavity was verified. In the third case, the calculated binder wrap agrees quantitatively with measured data for a decklid stretch-draw die. The later result was used in guiding the modifications of the layout.
Recommended Content
Technical Paper | Stretch-Bend Forming Limits of 1008 AK Steel |
Technical Paper | Strain Aging Properties Of High-Strength Hot-Rolled Steels |
Aerospace Material Specification | Steel, Sheet and Strip Forming (Special Quality) Low Carbon |
Authors
Citation
Chen, K. and Waugh, T., "Applications of a Binder Wrap Calculation Model to Layout of Sheet Steel Forming Dies," SAE Technical Paper 900278, 1990, https://doi.org/10.4271/900278.Also In
References
- Chen, K. K. 1987 ‘A new finite element method for binder wrap calculations,’ ASM International J. Mater. Shaping Technol. 5 107 116
- Chen, K. K. 1988 ‘A Binder Wrap Calculation Procedure for Sheet Metal Formability Analysis,’ Kiefer B. V. et al. Materails in Manufacturing Process 8 American Society of Mechanical Engineers
- Chen, K. K. Rechenbach, W. S. Vadhavkar, A. V. Assiff, T. C. 1988 ‘A binder wrap evaluation method for a class of sheet metal forming dies,’ Chryssolouris, G. Komanduri, R. Proc. of Manufacturing International '88 ASME 1 181 188
- Duncan, J. L. Sowerby, R. Chu, E. 1986 ‘The development of sheet metal modelling,’ Wang, N.-M. Tang, S. C. Computer Modeling of Sheet Metal Forming Process; Theory, Verification and Application The Metallurgical Society, Inc.
- Frey, W. H.
- Keeler, S. P. 1988 ‘Fifty Years of Sheet Metal Formability -- Has Science Replaced the Art?’ SAE Paper # 880363 Advances and Trends in Automotive Sheet Steel Stamping SAE Publication P-206 27 34
- Mital, N. K. 1983 ‘Prediction of binder wrap in sheet metal stampings using finite element method,’ Proc. 1983 International Computers in Engineering Conference and Exhibit ASME
- Okamoto, I. Takahashi, A. Sugiura, H. Hiramatsu, T. Yamada, N. Mori, T. 1988 SAE Paper # 880524 Advances and Trends in Automotive Sheet Steel Stamping SAE Publication P-206 79 89
- Stevenson, R. 1988 ‘Modeling of sheet metal forming - A status report,’ SAE Paper # 880523 Advances and Trends in Automotive Sheet Steel Stampings SAE Publication P-206 71 77
- Tang, S. C. 1980 ‘Computer prediction of the deformed shape of a draw blank during the binder-wrap stage,’ J. of Applied Metalworking 5 22 29
- Tang, S. C. Ilankamban, R. Ling, P. 1988 ‘A finite element modeling of the stretch-draw forming Process,’ SAE Paper # 880523 Advances and Trends in Automotive Sheet Steel Stampings SAE Publication P-206 101 107
- Tang, S. C. Chappuis, L. B. 1989 ‘Analysis of sheet metal forming process by a general thin shell element,’ Thompson, E. G. et al. NUMIFORM 89 Numerical Methods in Industrial Forming Processes 75 84 Balkema A. A. Rotterdam Proc. of the 3rd Intern. Conf. on Numerical Methods in Industrial Forming Processes Fort Collins, Colorado 26-30 June 1989
- Thompson, E. G. Wood, R. D. Zienkiewicz, O. C. Samuelsson, A. 1989 NUMIFORM 89 Numerical Methods in Industrial Forming Processes Balkema A. A. Rotterdam Proc. of the 3rd Intern. Conf. on Numerical Methods in Industrial Forming Processes Fort Collins, Colorado 26-30 June 1989
- Wang, N.-M. Somaratna, N. 1989 ‘Numerical simulation of industrial sheet forming processes,’ Thompson, E. G. et al. NUMIFORM 89 Numerical Methods in Industrial Forming Processes 75 84 Balkema A. A. Rotterdam Proc. of the 3rd Intern. Conf. on Numerical Methods in Industrial Forming Processes Fort Collins, Colorado 26-30 June 1989