The Effects of Swirl and Injection Parameters on Diesel Combustion and Heat Transfer

Authors

• Jon H. Van Gerpen - Iowa State University Dept. of Mechanical Engineering
• Cheng-wen Huang - University of Wisconsin-Madison Dept. of Mechanical Engineering
• Gary L. Borman - University of Wisconsin-Madison Dept. of Mechanical Engineering

Topic

• Diesel / compression ignition engines
• Combustion and combustion processes
• Pressure
• Engine cylinders
• Nozzles
• Particulate matter (PM)

Citation

Also In

References

1. Chan, T.T. Borman, G.L. “An Experimental Study of Swirl and EGR Effects on Diesel Combustion by Use of the Dumping Method,” SAE Paper 820359 1982
2. Nakanishi, K. Arai, M. Hiroyasu, H. “The Effect of Air Swirl on the Time History of the Diesel Particulate in the Combustion Chamber” ASME-JSME Thermal Engineering Joint Conference Proc. Hawaii March 20-24 1983
3. Wilson, R.P., Jr. Miur, E.B. Pellicciotti, F.A. “Emissions Study of a Single-Cylinder Diesel Engine,” SAE Paper 740123 1974
4. Khan, I.M. Wang, C.H.T. Langridge, B.E. “Effect of Air Swirl on Smoke and Gaseous Emissions from Direct-Injection Diesel Engines,” SAE Paper 720102 1972
5. Lyn, W.-T. “The Spectrum of Diesel Combustion Research,” Proc. Instn. Mech. Engrs. 184 1 1969 1970
6. Greeves, G. Khan, I.M. Wang, C.H.T. Fenne, I. “Origins of Hydrocarbon Emissions from Diesel Engines,” SAE Paper 770259 1977
7. Hiroyasu, H. Arai, M. Nishida, K. Yoshikawa, S. “Behavior of Combustion Swirl in Direct Injection Diesel Engine” ASME-JSME Therm. Engr. Joint Conf. Proc. Hawaii March 20-24 1983
8. Hames, R.J. Merrion, D.F. Ford, H.S. “Some Effects of Fuel Injection System Parameters on Diesel Exhaust Emissions,” SAE Paper 710671 1971
9. Greeves, G. “Response of Diesel Combustion Systems to Increase of Fuel Injection Rate SAE Paper 790037 1979
10. Khan, I.M. Grigg, H.C. “Progress of Diesel Combustion Research,” Ninth International Congress on Combustion Engines (CIMAC) Stockholm, Sweden 1971
11. Chen, S.K. Flynn, P.F. “Development of a Single Cylinder Compression Ignition Research Engine,” SAE Paper 650733 1965
12. Kimberley, J.A. Didomenico, R.A. “UFIS - A New Diesel Injection System,” SAE Paper 770084 1977
13. MacDonald, J.S. Plee, S.L. D'Arcy, J.B. Schreck, R.M. “Experimental Measurements of the Independent Effects of Dilution Ratio and Filter Temperature on Diesel Exhaust Particulate Samples,” SAE Paper 800185 1980
14. Bendersky, D. “A Special Thermocouple for Measuring Transient Temperatures,” Mechanical Engineering 75 1953 117
15. Chan, T.T. “The Effect of Swirl and Exhaust Gas Recirculation on Cylinder Averaged Oxides of Nitrogen Histories in a Diesel Engine,” M.S. Thesis Mechanical Engineering Department, University of Wisconsin-Madison 1981
16. Henein, N.A. Bolt, J.A. “Ignition Delay in Diesel Engines,” SAE Paper 670007 1967
17. Krieger, R.B. Borman, G.L. “The Computation of Apparent Heat Release for Internal Combustion Engines,” ASME Paper 66-WA/DGP-4 1966
18. Annand, W.J.D. “Heat Transfer in the Cylinders of Reciprocating Internal Combustion Engines,” Proc. Instn. Mech. Engrs. 177 36 973 1963
19. Olikara, C. Borman, G.L. “A Computer Program for Calculating Properties of Equilibrium Combustion Products with Some Applications to I.C. Engines,” SAE Paper 750468 1975
20. Wahba, G. “Smoothing Noisy Data with Spline Functions Numer. Math. 24 383 393 1975
21. Hamming, R.W. Digital Filters Prentice Hall Englewood, New Jersey 1977
22. Gao, X. Chen, J. Ye, Z. Foster, D. Borman, G. “Ignition Delay and Heat Release Analysis of an Ethanol Fumigated Turbocharged Diesel Engine,” Proc. DGP ASME 1983, given at Energy Sources Technology Conf. Houston, TX
23. Wade, R.W. Hunter, C.E. “Analysis of Combustion Performance of Diesel Fuels,” CRC Workshop on Diesel Fuel Combustion Performance Atlanta, Georgia September 14 1983
24. Hiroyasu, H. Kadota, T. Arai, M. “Supplementary Comments: Fuel Spray Characterization in Diesel Engines,” Combustion Modeling in Reciprocating Engines Mattavi J.N. Amann C.A. Plenum 1980
25. Logan, M.R. Gudgeon, J.A. Uyehara, O.A. Myers, P.S. “Experimental Determination of Local H/C Ratio and Hydrogen-Particulate,” SAE Paper 820362 1982
26. Voiculescu, I.A. Borman, G.L. “An Experimental Study of Diesel Engine Cylinder-Averaged NO x Histories,” SAE Paper 780228 1978
27. Overbye, V.D. Bennethum, J.E. Myers, P.S. Uyehara, O.A. “Unsteady Heat Transfer in Engines,” SAE Transactions 69 1961 461 493
28. Dao, K. Uyehara, O.A. Myers, P.S. “Heat Transfer Rates at Gas-Wall Interfaces in a Motored Piston Engine,” SAE Paper 730632 1973
29. Wendland, D.W. “The Effect of Periodic Pressure and Temperature Fluctuations on Unsteady Heat Transfer in a Closed System,” Ph.D. Thesis Mechanical Engineering Department, University of Wisconsin-Madison 1968
30. Annand, W.J.D. Ma, T.H. “Instantaneous Heat Transfer Rates to the Cylinder Head Surface of a Small Compression-Ignition Engine,” Proc. Instn. Mech. Engrs. 1970/71 185 976 987
31. Sihling, K. Woschni, G. “Experimental Investigation of the Instantaneous Heat Transfer in the Cylinder of a High Speed Diesel Engine,” SAE, SP-449, paper no. 790833 1979
32. Du, C.J. Kittelson, D.B. “Total Cylinder Sampling from a Diesel Engine: Part III - Particulate Measurements,” SAE Paper 830243 1983
33. Van Gerpen, J.H. “The Effects of Air Swirl and Fuel Injection System Parameters on Diesel Combustion,” Ph.D. Thesis Department of Mechanical Engineering, University of Wisconsin-Madison 1984

Cited By