Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Numerical Assessment of Tribological Performance of Different Low Viscosity Engine Oils in a 4-Stroke CI Light-Duty ICE

Journal Article
2022-01-0321
ISSN: 2641-9637, e-ISSN: 2641-9645
DOI: https://doi.org/10.4271/2022-01-0321
Published March 29, 2022 by SAE International in United States
Numerical Assessment of Tribological Performance of Different Low Viscosity Engine Oils in a 4-Stroke CI Light-Duty ICE
Sector:
Citation: Tormos, B., Jiménez, A., Fang, T., Mainwaring, R. et al., "Numerical Assessment of Tribological Performance of Different Low Viscosity Engine Oils in a 4-Stroke CI Light-Duty ICE," SAE Int. J. Adv. & Curr. Prac. in Mobility 4(5):1524-1536, 2022, https://doi.org/10.4271/2022-01-0321.
Language: English

References

  1. Dornoff , J. , Miller , J. , Mock , P. , and Tietge , U. 2017
  2. Yamamoto , K. , Hiramatsu , T. , Hanamura , R. , Moriizumi , Y. et al. The Study of Friction Modifiers to Improve Fuel Economy for WLTP with Low and Ultra-Low Viscosity Engine Oil SAE Technical Paper 2019-01-2205 2019 https://doi.org/10.4271/2019-01-2205
  3. Manuel Luján , J. , Pla , B. , Bares , P. , and Pandey , V. Adaptive Calibration of Diesel Engine Injection for Minimising Fuel Consumption with Constrained NOx Emissions in Actual Driving Missions Int. J. Engine Res. 22 6 Jun. 2021 1896 1905
  4. Luján , J.M. , Climent , H. , Novella , R. , and Rivas-Perea , M.E. Influence of a Low Pressure EGR Loop on a Gasoline Turbocharged Direct Injection Engine Appl. Therm. Eng. 89 Jul. 2015 432 443
  5. Holmberg , K. , Andersson , P. , and Erdemir , A. Global Energy Consumption Due to Friction in Passenger Cars Tribol. Int. 47 Mar. 2012 221 234
  6. Delprete , C. and Razavykia , A. Piston Dynamics, Lubrication and Tribological Performance Evaluation: A Review Int. J. Engine Res. 21 5 Jun. 2020 725 741
  7. Delprete , C. , Razavykia , A. , and Baldissera , P. Detailed Analysis of Piston Secondary Motion and Tribological Performance Int. J. Engine Res. 21 9 Nov. 2020 1647 1661
  8. Liu , R. , Meng , X. , and Cui , Y. Influence of Numerous Start-Ups and Stops on Tribological Performance Evolution of Engine Main Bearings Int. J. Engine Res. 21 8 Oct. 2020 1362 1380
  9. Tomanik , E. , Profito , F. , Sheets , B. , and Souza , R. Combined Lubricant-Surface System Approach for Potential Passenger Car CO2 Reduction on Piston-Ring-Cylinder Bore Assembly Tribol. Int. 149 July 2020 1 12
  10. Morawitz , U. , Mehring , J. , and Schramm , L. Benefits of Thermal Spray Coatings in Internal Combustion Engines, with Specific View on Friction Reduction and Thermal Management SAE Technical Paper 2013-01-0292 2013 https://doi.org/10.4271/2013-01-0292
  11. Tomanik , E. , Fujita , H. , Sato , S. , Paes , E. et al. Investigation of PVD Piston Ring Coatings with Different Lubricant Formulations ASME 2017 Intern. Combust. Engine Div. Fall Tech. Conf. ICEF 2017 2 2017 1 10
  12. Kano , M. Diamond-Like Carbon Coating Applied to Automotive Engine Components Tribol. Online 9 3 Sep. 2014 135 142
  13. Koszela , W. , Pawlus , P. , Reizer , R. , and Liskiewicz , T. The Combined Effect of Surface Texturing and DLC Coating on the Functional Properties of Internal Combustion Engines Tribol. Int. 127 Nov. 2018 470 477
  14. Sagawa , T. , Nakano , S. , Shouganji , I. , Okuda , S. et al. MR20DD Motoring Fuel Economy Test for 0W-12 and 0W-8 Low Viscosity Engine Oil SAE Technical Paper 2019-01-2295 2019 https://doi.org/10.4271/2019-01-2295
  15. Seth , S. , Maloth , S. , Kumar , P. , Tyagi , B. et al. New Generation Fuel Efficient Engine Oils with Superior Viscometrics SAE Technical Paper 2017-01-2349 2017 https://doi.org/10.4271/2017-01-2349
  16. Macián , V. , Tormos , B. , Bermúdez , V. , and Ramírez , L. Assessment of the Effect of Low Viscosity Oils Usage on a Light Duty Diesel Engine Fuel Consumption in Stationary and Transient Conditions Tribol. Int. 79 2014 132 139
  17. Sgroi , M.F. et al. Engine Bench and Road Testing of an Engine Oil Containing MoS2 Particles as Nano-Additive for Friction Reduction Tribol. Int. 105 Jan. 2017 317 325
  18. Taylor , R.I. , De Kraker , B.R. , Morina , A. , Neville , A. et al. Shear Rates in Engines and Implications for Lubricant Design Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 231 9 2017 1106 1116
  19. Tormos , B. , Pla , B. , Bastidas , S. , Ramírez , L. et al. Fuel Economy Optimization from the Interaction between Engine Oil and Driving Conditions Tribol. Int. 138 May 2019 263 270
  20. Macián , V. , Tormos , B. , Ruíz , S. , and Ramírez , L. Potential of Low Viscosity Oils to Reduce CO2 Emissions and Fuel Consumption of Urban Buses Fleets Transp. Res. Part D Transp. Environ. 39 Aug. 2015 76 88
  21. Tormos , B. , Martín , J. , Blanco-Cavero , D. , and Jiménez-Reyes , A.J. One-Dimensional Modeling of Mechanical and Friction Losses Distribution in a Four-Stroke Internal Combustion Engine J. Tribol. 142 1 Jan. 2020
  22. Tormos , B. , Martín , J. , Pla , B. , and Jiménez-Reyes , A.J. A Methodology to Estimate Mechanical Losses and its Distribution During a Real Driving Cycle Tribol. Int. 145 December 2019 2020 106208
  23. Lizarraga-Garcia , E. , Davenport , T. , Carden , P. , Vries , A. et al. Lubricant Impact on Friction by Engine Component: A Motored Friction Tear Down Assessment of a Production 3.6L Engine SAE Technical Paper 2019-01-2239 2019 https://doi.org/10.4271/2019-01-2239
  24. Seeton , C.J. Viscosity-Temperature Correlation for Liquids Tribol. Lett. 22 1 2006 67 78
  25. Patir , N. and Cheng , H.S. An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication J. Tribol. 100 January 1978 12 17
  26. Patir , N. and Cheng , H.S. Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces J. Lubr. Technol. 101 2 1979 220 229
  27. Tomanik , E. , Chacon , H. , and Teixeira , G. A Simple Numerical Procedure to Calculate the Input Data of Greenwood-Williamson Model of Asperity Contact for Actual Engineering Surfaces Tribol. Ser. 41 2003 205 215
  28. Profito , F. , Cousseau , T. , and Tomanik , E. Folded Metal Effect on Lubricant Film Thickness and Friction Using a Mixed Lubrication Deterministic Model SAE Technical Paper 2014-36-0302 2014 https://doi.org/10.4271/2014-36-0302
  29. Profito , F.J. , Tomanik , E. , and Zachariadis , D.C. Effect of Cylinder Liner Wear on the Mixed Lubrication Regime of TLOCRs Tribol. Int. 93 2016 723 732
  30. Chen , H. and Tian , T. The Influences of Cylinder Liner Honing Patterns and Oil Control Ring Design Parameters on the Interaction between the Twinland Oil Control Ring and the Cylinder Liner in Internal Combustion Engines SAE Technical Paper 2008-01-1614 2008 https://doi.org/10.4271/2008-01-1614
  31. Chen , H. , Li , Y. , and Tian , T. A Novel Approach to Model the Lubrication and Friction between the Twin-Land Oil Control Ring and Liner with Consideration of Micro Structure of the Liner Surface Finish in Internal Combustion Engines SAE Technical Paper 2008-01-1613 2008 https://doi.org/10.4271/2008-01-1613
  32. Shayler , P. , Leong , D. , and Murphy , M. Contributions to Engine Friction during Cold, Low Speed Running and the Dependence on Oil Viscosity SAE Technical Paper 2005-01-1654 2005 https://doi.org/10.4271/2005-01-1654
  33. Sander , D.E. , Allmaier , H. , Knauder , C. , and Strömstedt , F. Potentials and Risks of Reducing Friction with Future Ultra-Low-Viscosity Engine Oils MTZ Worldw. 79 12 Dec. 2018 20 27
  34. Zhmud , B. , Tomanik , E. , Jiménez , A. , Profito , F. et al. Powertrain Friction Reduction by Synergistic Optimization of Cylinder Bore Surface and Lubricant - Part 2: Engine Tribology Simulations and Tests SAE Technical Paper 2021-01-1217 2021 https://doi.org/10.4271/2021-01-1217
  35. Tomanik , E. , Profito , F.J. , Tormos , B. , Jiménez , A.J. et al. Powertrain Friction Reduction by Synergistic Optimization of the Cylinder Bore Surface and Lubricant Part 1: Basic Modelling SAE Technical Paper 2021-01-1214 2021 https://doi.org/10.4271/2021-01-1214
  36. Zhu , D. and Wang , Q.J. On the λ Ratio Range of Mixed Lubrication Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 226 12 2012 1010 1022
  37. Rahnejat , H. 2010

Cited By