This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Research on Multi-Parameter Interaction Influence Law and Multi-Objective Optimization of Common Rail Injector
Technical Paper
2021-01-0545
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Event:
SAE WCX Digital Summit
Language:
English
Abstract
In order to improve the injection performance of high pressure common rail fuel system and optimize the design of electronic control injector more effectively, the simulation model of high pressure common rail fuel system was built by using AMESim simulation platform, and the accuracy of the simulation model was verified by comparing with the experimental data. In this paper, the needle opening response, needle closing response and cycle fuel injection were used as performance evaluation indicators, the AMESim model was used to carry out quantitative analysis of evaluation indicators. Through quantitative analysis, the key characteristic parameters are identified and those are solenoid valve preload, control valve stem lift, control cavity oil inlet orifice diameter, control cavity oil outlet orifice diameter, needle lift and nozzle diameter. Combining the optimal Latin hypercube experimental design and the least squares regression method, the corresponding multivariate binomial response surface prediction models were obtained. Among them, the R-squared values of the prediction models are 0.9993, 0.9967 and 0.9996 respectively, indicating the effectiveness of the models. At the same time, the correlation between various characteristic parameters and their interactions with cycle fuel injection, needle opening response and needle closing response were revealed. On this basis, the NSGA-II algorithm was used for multi-objective optimization, the shape of the parato was obtained and the final solution was determined. The optimization results show that under the condition of rail pressure 160MPa, fuel injection pulse width 1.2ms, the needle opening response and needle closing response are improved by 21.78% and 7.38% respectively, and the cycle fuel injection is increased by 10.07%; Under the other working conditions, the optimized structure still improve the system performance.
Recommended Content
Authors
Topic
Citation
Zhou, J., Fan, L., Wei, Y., and Bai, Y., "Research on Multi-Parameter Interaction Influence Law and Multi-Objective Optimization of Common Rail Injector," SAE Technical Paper 2021-01-0545, 2021, https://doi.org/10.4271/2021-01-0545.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 | ||
Unnamed Dataset 7 |
Also In
References
- Sidhu , M.S. , Roy , M.M. , and Wang , W. Glycerine Emulsions of Diesel-Biodiesel Blends and their Performance and Emissions in a Diesel Engine Applied Energy 230 148 159 2018 10.1016/j.apenergy.2018.08.103
- Herfatmanesh , M.R. , and Zhao , H. Experimental Investigation of Hydraulic Effects of Two-Stage Fuel Injection on Fuel-Injection Systems and Diesel Combustion in a High-Speed Optical Common-Rail Diesel Engine International Journal of Engine Research 15 1 48 65 2014 10.1177/1468087412458100
- Agarwal , A.K. , Singh , A.P. , Maurya , R.K. , Chandra Shukla , P. et al. Combustion Characteristics of a Common Rail Direct Injection Engine Using Different Fuel Injection Strategies International Journal of Thermal Sciences 134 475 484 2018 10.1016/j.ijthermalsci.2018.07.001
- Fan , L. , Bai , Y. , Liu , Y. , Ma , X. et al. Injection Characteristics of Double Seal Electronically Controlled Injector Transactions of CSICE 35 02 155 163 2017 10.16236/j.cnki.nrjxb.201702023
- Wang , H.P. , Zheng , D. , and Tian , Y. High Pressure Common Rail Injection System Modeling and Control ISA Transactions 63 265 273 2016 10.1016/j.isatra.2016.03.002
- Buryuk , V.V. , Kayukov , S.S. , Gorshkalev , A.A. , Belousov , A.V. et al. Modelling the High-Speed Injector for Diesel ICE IOP Conference Series: Materials Science and Engineering 302 012054 2018 10.1088/1757-899x/302/1/012054
- Zhang , Y. , You , P. , Zhao , J. , Zhang , Y. et al. Research on Sealing Performance of Pressure-Time Injector Needle Couples Lubrication Engineering 43 02 94 99 2018 10.3969/j.issn.0254-0150.2018.02.017
- Wang , L. , Li , G. , Xu , C.L. , Xi , X. et al. The Investigation of Geometric Parameters on the Injection Characteristic of the High Pressure Common-Rail Injector Journal of Engineering for Gas Turbines and Power 141 2 022801.1 022801.12 2019 10.1115/1.4041134
- Li , X. , Cheng , Y. , Ma , X. , and Yang , X. The Sensitivity of Inner Nozzle Flow in GDI Injector to the Nozzle Geometry Parameters Journal of Engineering for Gas Turbines and Power 2019 10.1115/1.4042729
- Feng , Y. , Wang , J. , Ma , F. , Su , T. et al. Study on the Sensitivity of the Hydraulic Response Characteristics of the Electronic Fuel Injector Regarding the Key Structural Parameters Advances in Mechanical Engineering 11 1 2019 10.1177/1687814018822590
- Bai , Y. , Fan , L. , Ma , X. , Song , E. et al. Influential Factors’ Correlation Analysis Upon Common Rail System Fuel Injection Quantity for Diesel Engines. Proceedings of the Institution of Mechanical Engineers Journal of Systems and Control Engineering 231 2 131 145 2017 10.1177/0959651816680908
- Lei , W. , Zhu , Z. , Bu , J. , and Yu , Y. Multi-Objective Simulation Optimization of Flow Characteristics of Solenoid Valve Injector Journal of Military Transportation University 21 08 84 90 2019 10.16807/j.cnki.12-1372/e.2019.08.017
- Hung , N.B. , and Lim , O. Improvement of Electromagnetic Force and Dynamic Response of a Solenoid Injector Based on the Effects of Key Parameters International Journal of Automotive Technology 20 5 949 960 2019 10.1007/s12239-019-0089-5
- WU , S. , WU , X. , Zhou , T. , Zhou , W. et al. Optimization and Validation of the Solenoid Valve for Common Rail Injector Modern Vehicle Power 2016 01 54 58 2016 10.3969/j.issn.1671-5446.2016.01.013
- Lei , L. , Tang , C. , Lai , Z. , Zhao , Y. et al. Optimization and Design of High Pressure Common Rail Injector Drive Circuit Vehicle Engine 2018 06 66 70 2018 10.3969/j.issn.1001-2222.2018.06.011
- Yao , X. , Zhang , Z. , Kong , X. , and Yin , C. Dynamic Response Analysis and Structure Optimization of GDI Injector based on Mathematical Model International Journal of Reliability, Quality and Safety Engineering 25 02 1850008 2018 10.1142/s0218539318500080