This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Constitutive, Formability, and Fracture Characterization of 3rd Gen AHSS with an Ultimate Tensile Strength of 1180 MPa

Journal Article
2021-01-0308
ISSN: 2641-9637, e-ISSN: 2641-9645
Published April 06, 2021 by SAE International in United States
Constitutive, Formability, and Fracture Characterization of 3rd Gen AHSS with an Ultimate Tensile Strength of 1180 MPa
Sector:
Citation: Noder, J., Gutierrez, J., Zhumagulov, A., Khameneh, F. et al., "Constitutive, Formability, and Fracture Characterization of 3rd Gen AHSS with an Ultimate Tensile Strength of 1180 MPa," SAE Int. J. Adv. & Curr. Prac. in Mobility 3(3):1395-1407, 2021, https://doi.org/10.4271/2021-01-0308.
Language: English

References

  1. Davenport , M. Third-Generation Advanced High-Strength Steel Emerges Stamping Journal 2017 https://www.thefabricator.com/stampingjournal/article/stamping/third-generation-advanced-high-strength-steel-emerges
  2. Pednekar , V. , Pereira , A. , Ballard , A. , Chen , G. et al. Structural Performance Comparison between 980 MPa Generation 3 Steel and Press Hardened Steel Applied in the Body-in-White A and B-Pillar Parts SAE Technical Paper 2020-01-0537 2020 https://doi.org/10.4271/2020-01-0537
  3. Tian , H. , Brownell , B. , Baral , M. , and Korkolis , Y.P. Earing in Cup-Drawing of Anisotropic Al-6022-T4 Sheet International Journal of Material Forming 2016 10.1007/s12289-016-1282-y
  4. Baral , M. , Ha , J. , and Korkolis , Y.P. Plasticity and Ductile Fracture Modeling of an Al-Si-Mg Die-Cast Alloy International Journal of Fracture 2019 10.1007/s10704-019-00345-1
  5. Dunand , M. and Mohr , D. Hybrid Experimental-Numerical Analysis of Basic Ductile Fracture Experiments for Sheet Metals International Journal of Solids and Structures 47 1130 1143 2010
  6. Mohr , D. and Henn , S. Calibration of Stress-Triaxiality Dependent Crack Formation Criteria: A New Hybrid Experimental-Numerical Method Experimental Mechanics 47 805 820 2007
  7. NUMISHEET Benchmark 2021 https://www.tms.org/portal/MEETINGS___EVENTS/TMS_Meetings___Events/Upcoming_TMS_Meetings/NUMISHEET2020/benchmarkTests/BM2/portal/Meetings___Events/2020/NUMISHEET2020/bm2.aspx?hkey=505d5161-adb5-4f81-a926-3cbb83af5676
  8. Lin , J. et al. Effect of Constitutive Model on Springback Prediction of MP980 and AA6022-T4 International Journal of Material Forming 13 1 13 2020
  9. Eggertsen , P.-A. and Mattiasson , K. On Constitutive Modeling for Springback Analysis International Journal of Mechanical Sciences 52 804 818 2010
  10. Gutierrez , J.E. , Noder , J. , and Butcher , C. Experimental Characterization and Deterministic Prediction of In-Plane Formability of 3rd Generation Advanced High Strength Steels Metals 10 7 2020
  11. Noder , J. , Abedini , A. , and Butcher , C. Evaluation of the VDA 238-100 Tight Radius Bend Test for Plane Strain Fracture Characterization of Automotive Sheet Metals Experimental Mechanics https://doi.org/10.1007/s11340-020-00597-2
  12. Butcher , C. et al. On the Experimental Characterization of Sheet Metal Formability and the Consistent Calibration of the MK Model for Biaxial Stretching In Plane Stress Journal of Materials Processing Technology 116887 287 2021
  13. Abedini , A. , Noder , J. , Kohar , C.P. , and Butcher , C. Accounting for Shear Anisotropy and Material Frame Rotation on the Constitutive Characterization of Automotive Alloys Using Simple Shear Tests Mechanics of Materials 148 103419 2020
  14. Noder , J. and Butcher , C. A Comparative Investigation into the Influence of the Constitutive Model on the Prediction on In-Plane Formability for Nakazima and Marciniak Tests International Journal of Mechanical Sciences 163 105138 2019
  15. Peirs , J. , Verleysen , P. , and Degrieck , J. Novel Technique for Static and Dynamic Shear Testing of Ti6Al4V Sheet Experimental Mechanics 52 729 741 2012
  16. Cleveland , R.M. and Ghosh , A.K. Inelastic Effects on Springback in Metals International Journal of Plasticity 18 769 785 2002
  17. Yoshida , F. , Uemori , T. , and Fujiwara Elastic-Plastic Behavior of Steel Sheets Under In-Plane Cyclic Tension-Compression at Large Strain International Journal of Plasticity 18 633 659 2002
  18. Cobo , R. , Hernandez , R. , Riera , D. , and Benito , J.A. Young’s Modulus Variation During Unloading for a Wide Range of AHSS Steel Sheets 1-10 2011
  19. Bardelcik , A. , Worswick , M.J. , Winkler , S. , and Wells , M.A. A Strain Rate Sensitive Constitutive Model for Quenched Boron Steel with Tailored Properties International Journal of Impact Engineering 50 49 62 2012
  20. Smerd , R. et al. High Strain Rate Tensile Testing of Automotive Aluminum Alloy Sheet International Journal of Impact Engineering 32 1-4 541 560 2005
  21. Rahmaan , T. Low to High Strain Rate Characterization of DP600, TRIP780, AA5182-O 2015
  22. Cowper , G.R. and Symonds , P.S. Strain-Hardening and Strain-Rate Effects in the Impact Loading of Cantilever Beams 1957
  23. Wei , X. , Fu , R. , and Li , L. Tensile Deformation Behavior of Cold-Rolled TRIP-Aided Steels Over Large Range of Strain Rates Materials Science and Engineering: A 465 1-2 260 266 2007
  24. International Organization for Standardization ISO/DIC 12004-2:2008. Metallic Materials Sheet and Strip - Determination of Forming Limit Curves - Part 2: Determination of Forming Limit Curves in the Laboratory 2008
  25. Min , J. , Stoughton , T.B. , Carsley , J.E. , and Lin , J. Compensation for Process-Dependent Effects in the Determination of Localized Necking Limits International Journal of Mechanical Sciences 117 115 134 2016
  26. Bressan , J.D. and Williams , J.A. The Use of a Shear Instability Criterion to Predict Local Necking in Sheet Metal Deformation International Journal of Mechanical Science 5 155 168 1983
  27. Hora , P. , Tong , L. , and Berisha , B. Modified Maximum Force Criterion, a Model for the Theoretical Prediction of Forming Limit Curves Inernational Journal of Material Forming 6 2 267 279 2013
  28. VDA 238-100 2017
  29. Noder , J. , Dykeman , J. , and Butcher , C. New Methodologies for Fracture Detection of Automotive Steels in Tight Radius Bending: Application to the VDA 238-100 V-Bend Test 2020 Experimental Mechanics https://doi.org/10.1007/s11340-020-00627-z
  30. Cheong , K. , Butcher , C. , and Dykeman , J. The Influence of the Through-Thickness Strain Gradients on the Fracture Characterization of Advanced High-Strength Steels SAE International Journal of Materials and Manufacturing, SAE Technical Paper 2018-01-0627 2018 https://doi.org/10.4271/2018-01-0627
  31. Butcher , C. and Abedini , A. Shear Confusion: Identification of the Appropriate Equivalent Strain in Simple Shear Using the Logarithmic Strain Measure International Journal of Mechanical Sciences 134 273 283 2017
  32. Butcher , C. , Anderson , D. , and Worswick , M. Predicting Failure During Sheared Edge Stretching using a Damaged-Based Model for the Shear-Affected Zone International Journal of Materials and Manufacturing 6 304 312 2013
  33. Pathak , N. et al. Damage Evolution in Complex-Phase and Dual-Phase Steels during Edge Stretching Materials 10 4 1944 1996 2017

Cited By