Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Numerical Simulation of the Electrostatic Coating Process: the Effect of Applied Voltage, Droplet Charge and Size on the Coating Efficiency

Journal Article
2021-01-0022
ISSN: 2641-9645, e-ISSN: 2641-9645
DOI: https://doi.org/10.4271/2021-01-0022
Published March 02, 2021 by SAE International in United States
Numerical Simulation of the Electrostatic Coating Process: the Effect of Applied Voltage, Droplet Charge and Size on the Coating Efficiency
Sector:
Citation: Pendar, M. and Pascoa, J., "Numerical Simulation of the Electrostatic Coating Process: the Effect of Applied Voltage, Droplet Charge and Size on the Coating Efficiency," SAE Int. J. Adv. & Curr. Prac. in Mobility 3(3):1223-1230, 2021, https://doi.org/10.4271/2021-01-0022.
Language: English

References

  1. Pendar , M.R. , and Páscoa , J.C. Atomization and Spray Characteristics around an ERBS Using Various Operational Models and Conditions: Numerical Investigation International Journal of Heat and Mass Transfer 161 120243 2020
  2. Guettler , N. , Knee , P. , Ye , Q. , and Tiedje , O. Initial Droplet Conditions in Numerical Spray Painting by Electrostatic Rotary Bell Sprayers Journal of Coatings Technology and Research 17 5 1091 1104 2020
  3. Viti , V. and Kulkarni , J. CFD Analysis of the Electrostatic Spray Painting Process with a Rotating Bell Cup ILASS Americas, 21st Annual Conference on Liquid Atomization and Spray Systems Orlando, FL 2008
  4. Gödeke , L. , Oswald , W. , Willenbacher , N. , and Ehrhard , P. Dimensional Analysis of Droplet Size and Ligament Length During High-Speed Rotary Bell Atomization Journal of Coatings Technology and Research 1 7 2020
  5. Darwish Ahmad , A. , Singh , B.B. , Doerre , M. , Abubaker , A.M. et al. Spatial Positioning and Operating Parameters of a Rotary Bell Sprayer: 3D Mapping of Droplet Size Distributions Fluids 4 3 165 2019
  6. Darwish Ahmad , A. , Abubaker , A.M. , Salaimeh , A.A. , and Akafuah , N.K. Schlieren Visualization of Shaping Air during Operation of an Electrostatic Rotary Bell Sprayer: Impact of Shaping Air on Droplet Atomization and Transport Coatings 8 8 279 2018
  7. Stevenin , C. , Bereaux , Y. , Charmeau , J.-Y. , and Balcaen , J. Shaping Air Flow Characteristics of a High-Speed Rotary-Bell Sprayer for Automotive Painting Processes J. Fluids Eng. 137 11 111304 2015
  8. Toljic , N. , Adamiak , K. , Castle , G.S.P. , Kuo , H.H.H. et al. Three-Dimensional Numerical Studies on the Effect of the Particle Charge to Mass Ratio Distribution in the Electrostatic Coating Process Journal of Electrostatics 69 3 189 194 2011
  9. Osman , H. , Adamiak , K. , Castle , G.S. , Fan , H.T.C. et al. Comparison between the Numerical and Experimental Deposition Patterns for an Electrostatic Rotary Bell Sprayer ASME 2015 International Mechanical Engineering Congress and Exposition 2015
  10. Pendar , M.R. , and Páscoa , J.C. Numerical Modeling of Electrostatic Spray Painting Transfer Processes in Rotary Bell Cup for Automotive Painting International Journal of Heat and Fluid Flow 80 108499 2019
  11. Pendar , M. , and Pascoa , J. Numerical Investigation of Electrostatic Spray Painting Transfer Processes for Vehicle Coating SAE Int. J. Adv. & Curr. Prac. in Mobility 2 2 747 754 2020 https://doi.org/10.4271/2019-01-1856
  12. Pendar , M.R. , and Pascoa , J. Study of Droplet Characteristics and Spray Deposition during Coating Produced by an Electrostatic Rotary Bell Sprayer on OpenFoam, Progress in Canadian Mechanical Engineering 3 2020 10.32393/csme.2020.1132
  13. Im , K.S. , Lai , M.C. , Liu , Y. , Sankagiri , N. et al. Visualization and Measurement of Automotive Electrostatic Rotary-Bell Paint Spray Transfer Processes J. Fluids Eng. 123 2 237 245 2001
  14. Im , K.S. , Lai , M.C. , Yu , S.T.J. , and Matheson , R.R. Jr. Simulation of Spray Transfer Processes in Electrostatic Rotary Bell Sprayer J. Fluids Eng. 126 3 449 456 2004
  15. Toljic , N. , Adamiak , K. , Castle , G.S.P. , Kuo , H.H.H. et al. Three-Dimensional Numerical Studies on the Effect of the Particle Charge to Mass Ratio Distribution in the Electrostatic Coating Process Journal of Electrostatics 69 3 189 194 2011
  16. Brentjes , A. , Pozarlik , A.K. , and Brem , G. Numerical Simulation of Evaporating Charged Sprays in Spray Chilling Journal of Electrostatics 107 103471 2020
  17. Wilson , J. , Grib , S. , Darwish Ahmad , A. , Renfro , M. et al. Study of Near-Cup Droplet Breakup of an Automotive Electrostatic Rotary Bell (ESRB) Atomizer Using High-Speed Shadowgraph Imaging Coatings 8 5 174 2018
  18. Pendar , M.R. , and Páscoa , J.C. Numerical Analysis of Charged Droplets Size Distribution in the Electrostatic Coating Process: Effect of Different Operational Conditions Physics of Fluids 33 3 2021
  19. Ahmed , M. , and Youssef , M.S. Influence of Spinning Cup and Disk Atomizer Configurations on Droplet Size and Velocity Characteristics Chemical Engineering Science 107 149 157 2014
  20. Liu , J. , Yu , Q. , and Guo , Q. Experimental Investigation of Liquid Disintegration by Rotary Cups Chemical Engineering Science 73 44 50 2012
  21. Pendar , M.R. , Esmaeilifar , E. , and Roohi , E. LES Study of Unsteady Cavitation Characteristics of a 3-D Hydrofoil with Wavy Leading Edge International Journal of Multiphase Flow 132 103415 2020
  22. Rodrigues , F.F. , and Pascoa , J.C. Implementation of Stair-Shaped Dielectric Layers in Micro- and Macroplasma Actuators for Increased Efficiency and Lifetime Journal of Fluids Engineering 142 10 2020
  23. Pendar , M.R. , and Roohi , E. Investigation of Cavitation around 3D Hemispherical Head-Form Body and Conical Cavitators Using Different Turbulence and Cavitation Models Ocean Engineering 112 287 306 2016
  24. Roohi , E. , Pendar , M.R. , and Rahimi , A. Simulation of Three-Dimensional Cavitation behind a Disk Using Various Turbulence and Mass Transfer Models Appl. Math. Model. 2016
  25. Pendar , M.R. , and Roohi , E. Detailed Investigation of Cavitation and Supercavitation around Different Geometries Using Various Turbulence and Mass Transfer Models Journal of Physics: Conference Series 656 1 012070 2015
  26. Pendar , M.R. and Roohi , E. Investigation of Cavitation around Disk and Conical Cavitators Using Different Sets of Turbulence and Cavitation Models 4th International Conference on Advances in Mechanical Engineering-ICAME 2015

Cited By