This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Experimental Study of Additive-Manufacturing-Enabled Innovative Diesel Combustion Bowl Features for Achieving Ultra-Low Emissions and High Efficiency

Journal Article
2020-37-0003
ISSN: 2641-9637, e-ISSN: 2641-9645
Published June 30, 2020 by SAE International in United States
Experimental Study of Additive-Manufacturing-Enabled Innovative Diesel Combustion Bowl Features for Achieving Ultra-Low Emissions and High Efficiency
Sector:
Citation: Belgiorno, G., Boscolo, A., Dileo, G., Numidi, F. et al., "Experimental Study of Additive-Manufacturing-Enabled Innovative Diesel Combustion Bowl Features for Achieving Ultra-Low Emissions and High Efficiency," SAE Int. J. Adv. & Curr. Prac. in Mobility 3(1):672-684, 2021, https://doi.org/10.4271/2020-37-0003.
Language: English

References

  1. European Automobile Manufacturers Association (ACEA) June 2019
  2. Baldino , C. , Tietge , U. , Muncrief , R. , Bernard , Y. , and Mock , P. Road Tested: Comparative Overview of Real-World versus Type-Approval NOx and CO 2 Emissions from Diesel Cars in Europe ICCT White Paper September 2017 https://www.theicct.org/sites/default/files/publications/ICCT_RoadTested_201709.pdf
  3. Kufferath , A. , Krüger , M. , Naber , D. , Mailänder , E. , and Maier , R. The Path to a Negligible NO 2 Immission Contribution from the Diesel Powertrain Vienna Motoren Symposium 2018
  4. Avolio , G. , Brück , R. , Grimm , J. , Maiwald , O. , Rösel , G. , and Zhang , H. Super Clean Electrified Diesel: Towards Real NOx Emissions below 35 mg/km 27th Aachen Kolloquium Automobile and Engine Technology 2018
  5. Steinparzer , F. , Nefischer , P. , Stütz , W. , Hiemesch , D. and Kaufmann , M. The New BMW Six-Cylinder Top Engine With Innovative Turbocharging Concept 37th Vienna Motoren Symposium 2016
  6. Di Blasio , G. , Beatrice , C. , Belgiorno , G. , Pesce , F. et al. Functional Requirements to Exceed the 100 kW/l Milestone for High Power Density Automotive Diesel Engines SAE Int. J. Engines 10 5 2342 2353 2017 https://doi.org/10.4271/2017-24-0072
  7. Luckert , P. , Arndt , S. , Duvinage , F. , Kemmner , M. et al. The New Mercedes-Benz 4-Cylinder Diesel Engine OM654 - The Innovative Base Engine of the New Diesel Generation 24th Aachen Colloquium Automobile and Engine Technology 2015
  8. Recker , P. , Gheorghe , M. , Menne , C. , Xenakis , L. , Lilley , A. , and Maugham , R. Investigations for the Extension of the LP-EGR Operation Area at the Background of RDE 25th Aachen Colloquium Automobile and Engine Technology 2016
  9. Verdino , V. , Vassallo , A. et al. The New General Motors 3.0l Duramax Diesel Engine: A Technology Milestone Combining State-of-Art Efficiency, Emissions, Performance and Refinement Proceeding of Diesel Powertrains 3.0 2019
  10. Beatrice , C. , Di Blasio , G. , Pesce , F. , Vassallo , A. et al. Key Fuel Injection System Features for Efficiency Improvement in Future Diesel Passenger Cars SAE Int. J. Adv. & Curr. Prac. in Mobility 1 3 1084 1099 2019 https://doi.org/10.4271/2019-01-0547
  11. Di Blasio , G. , Beatrice , C. , Ianniello , R. , Pesce , F. et al. Balancing Hydraulic Flow and Fuel Injection Parameters for Low-Emission and High-Efficiency Automotive Diesel Engines SAE Technical Paper 2019-24-0111 2019 https://doi.org/10.4271/2019-24-0111
  12. Tanov , S. , Pachano , L. , Andersson , Ö. , Wang , Z. et al. Influence of Spatial and Temporal Distribution of Turbulent Kinetic Energy on Heat Transfer Coefficient in a Light Duty CI Engine Operating with Partially Premixed Combustion Appl. Therm. Eng. 129 31 40 2018 10.1016/j.applthermaleng.2017.10.006
  13. Garcia-Oliver , J.M. , Garcia , A. , Gil , A. , and Pachano , L. Study of Air Flow Interaction with Pilot Injections in a Diesel Engine by Means of PIV Measurements SAE Int. J. Engines 10 3 740 751 2017 https://doi.org/10.4271/2017-01-0617
  14. Miles , P.C. , Hildingsson , L. , and Hultqvist , A. The Influence of Fuel Injection and Heat Release on Bulk Flow Structures in a Direct-Injection, Swirl-Supported Diesel Engine Exp. Fluids 43 2-3 273 283 2007 10.1007/s00348-007-0281-7
  15. Eismark , J. , Andersson , M. , Christensen , M. , Karlsson , A. et al. Role of Piston Bowl Shape to Enhance Late-Cycle Soot Oxidation in Low-Swirl Diesel Combustion SAE Int. J. Engines 12 3 233 249 2019 https://doi.org/10.4271/03-12-03-0017
  16. Dolan , R. , Budde , R. , Schramm , C. , and Rezaei , R. 3D Printed Piston for Heavy-Duty Diesel Engines 2018 Ndia Ground Vehicle Systems Engineering and Technology Symposium Power & Mobility (P&M) Technical Session August 7-9, 2018 NOVI, MICHIGAN https://events.esd.org/wp-content/uploads/2018/07/3D-Printed-Piston-for-Heavy-Duty-Diesel-Engines.pdf
  17. Yao , M. , Zheng , Z. , and Liu , H. Progress and Recent Trends in Homogeneous Charge Compression Ignition (HCCI) Engines Progress in Energy and Combustion Science. 35 5 398 437 2009
  18. Wei , S. , Wang , F. , Leng , X. , Liu , X. , and Ji , K. Numerical Analysis on the Effect of Swirl Ratios on Swirl Chamber Combustion System of DI Diesel Engines Energy Conversion and Management 75 184 190 2013
  19. Eismark , J. and Balthasar , M. 2012
  20. Li , X. , Chen , Y. , Su , L. , and Liu , F. Effects of Lateral Swirl Combustion Chamber Geometries on the Combustion and Emission Characteristics of DI Diesel Engines and a Matching Method for the Combustion Chamber Geometry Fuel. 224 644 660 2018
  21. Millo , F. , Piano , A. , Bianco , A. , Pesce , F. , and Vassallo , A. 2020
  22. Millo , F. , Piano , A. , Bianco , A. , Pesce , F. , and Vassallo , A. Rouen 2020
  23. Vassallo , A. , Beatrice , C. , Di Blasio , G. , Belgiorno , G. et al. The Key Role of Advanced, Flexible Fuel Injection Systems to Match the Future CO2 Targets in an Ultra-Light Mid-Size Diesel Engine SAE Technical Paper 2018-37-0005 2018 https://doi.org/10.4271/2018-37-0005
  24. Mendez , S. and Thirouard , B. Using Multiple Injection Strategies in Diesel Combustion: Potential to Improve Emissions, Noise and Fuel Economy Trade-Off in Low CR Engines SAE International Journal of Fuels and Lubricants 1 1 662 674 2009 https://doi.org/10.4271/2008-01-1329
  25. O'Connor , J. and Musculus , M. Post Injections for Soot Reduction in Diesel Engines: A Review of Current Understanding SAE Int. J. of Engines 6 1 400 421 2013 https://doi.org/10.4271/2013-01-0917
  26. O’Connor , J. and Musculus , M. Effects of Exhaust Gas Recirculation and Load on Soot in a Heavy-Duty Optical Diesel Engine with Close-Coupled Post Injections for High-Efficiency Combustion Phasing International Journal of Engine Research 15 4 421 443 2014
  27. Kashdan , J. , Mendez , S. , and Bruneaux , G. On the Origin of Unburned Hydrocarbon Emissions in a Wall Guided, Low NOx Diesel Combustion System SAE Technical Paper 2007-01-1836 2007 https://doi.org/10.4271/2007-01-1836
  28. Han , M. , Assanis , D.N. , and Bohac , S.V. Sources of Hydrocarbon Emissions from Low-Temperature Premixed Compression Ignition Combustion from a Common Rail Direct Injection Diesel Engine Combust Sci Technol 181 496 517 2009
  29. Eismark , J. , Christensen , M. , Andersson , M. , Karlsson , A. , and Denbratt , I. Role of Fuel Properties and Piston Shape in Influencing Soot Oxidation in Heavy-Duty Low Swirl Diesel Engine Combustion Fuel 254 115568 2019

Cited By