Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Effect of Jet-Jet Angle on Combustion Process of Diesel Spray in an RCEM

Journal Article
2020-01-2058
ISSN: 2641-9645, e-ISSN: 2641-9645
DOI: https://doi.org/10.4271/2020-01-2058
Published September 15, 2020 by SAE International in United States
Effect of Jet-Jet Angle on Combustion Process of Diesel Spray in an RCEM
Sector:
Citation: Jo, H., Ishikawa, T., Horibe, N., Hayashi, J. et al., "Effect of Jet-Jet Angle on Combustion Process of Diesel Spray in an RCEM," SAE Int. J. Adv. & Curr. Prac. in Mobility 3(1):276-286, 2021, https://doi.org/10.4271/2020-01-2058.
Language: English

References

  1. Kimura , S. , Aoki , O. , Ogawa , H. , Muranaka , S. et al. New Combustion Concept for Ultra-Clean and High-Efficiency Small DI Diesel Engines SAE Technical Paper 1999-01-3681 1999 https://doi.org/10.4271/1999-01-3681
  2. Reitz , R.D. , Ogawa , H. , Payri , R. et al. IJER Editorial: The Future of the Internal Combustion Engine Int. J. Engine Research 21 1 3 10 2020 10.1177/1468087419877990
  3. Tanin , K. , Wickman , D. , Montgomery , D. , Das , S. et al. The Influence of Boost Pressure on Emissions and Fuel Consumption of a Heavy-Duty Single-Cylinder D.I. Diesel Engine SAE Technical Paper 1999-01-0840 1999 https://doi.org/10.4271/1999-01-0840
  4. Funayama , Y. , Nakajima , H. , and Shimokawa , K. A Study on the Effects of a Higher Compression Ratio in the Combustion Chamber on Diesel Engine Performance SAE Technical Paper 2016-01-0722 2016 https://doi.org/10.4271/2016-01-0722
  5. Kim , B. , Yoon , W. , Ryu , S. , and Ha , J. Effect of the Injector Nozzle Hole Diameter and Number on the Spray Characteristics and the Combustion Performance in Medium-Speed Diesel Marine Engines SAE Technical Paper 2005-01-3853 2005 https://doi.org/10.4271/2005-01-3853
  6. Pierpont , D. , and Reitz , R. Effects of Injection Pressure and Nozzle Geometry on D.I. Diesel Emissions and Performance SAE Technical Paper 950604 1995 https://doi.org/10.4271/950604
  7. Sibendu , S. , Anita , I.R. , Douglas , E.L. , and Suresh , A. Effect of Nozzle Orifice Geometry on Spray, Combustion, and Emission Characteristics under Diesel Engine Conditions Fuel 90 3 1267 1276 2011 10.1016/j.fuel.2010.10.048
  8. Matsson , A. , Jacobsson , L. , and Andersson , S. The Effect of Elliptical Nozzle Holes on Combustion and Emission Formation in a Heavy Duty Diesel Engine SAE Technical Paper 2000-01-1251 2000 https://doi.org/10.4271/2000-01-1251
  9. Numata , A. , Kumagai , T. , Nagae , Y. , and Osafune , S. Increase of Thermal Efficiency and Reduction of NOx Emissions in DI Diesel Engines Mitsubishi Heavy Industries, Ltd. Technical Review 38 3 136 140 2001
  10. Bergstrand , P. , and Denbratt , I. Diesel Combustion with Reduced Nozzle Orifice Diameter SAE Technical Paper 2001-01-2010 2001 https://doi.org/10.4271/2001-01-2010.
  11. Horibe , N. , Komizo , T. , Mamizuka , Y. , Sumimoto , T. et al. Analysis of Mixture Formation Process in a Diesel Engine with Post Injection SAE Technical Paper 2015-01-1836 2015 https://doi.org/10.4271/2015-01-1836
  12. Clément , C. , Ulf , A. , Öivind , A. , Rolf , E. , and Johansson , B. Influence of Jet-Jet Interactions on the Lift-Off Length in an Optical Heavy-Duty DI Diesel Engine Fuel 112 311– 318 2013 10.1016/j.fuel.2013.05.021
  13. Higgins , B. , and Siebers , D. Measurement of the Flame Lift-Off Location on DI Diesel Sprays Using OH Chemiluminescence SAE Technical Paper 2001-01-0918 2001 https://doi.org/10.4271/2001-01-0918
  14. Toda , N. , Yamashita , H. , Mashida , M. International Conference on Optical Particle Characterization) 2014 10.1117/12.2063632
  15. Fuyuto , T. , Hattori , Y. , Yamashita , H. , and Mashida , M. Backward Flow of Hot Burned Gas Surrounding High-Pressure Diesel Spray Flame from Multi-hole Nozzle SAE Int. J. Engines 9 1 71 83 2016 10.4271/2015-01-1837
  16. Fuyoto , T. , Hattori , Y. , Yamashita , H. , Toda , N. , and Mashida , M. Set-Off Length Reduction by Backward Flow of Hot Burned Gas Surrounding High-Pressure Diesel Spray Flame from Multi-Hole Nozzle Int. J. Engine Research 18 3 173 194 2016 10.1177/1468087416640429
  17. Bazyn , T. , and Koci , C. 2014
  18. Siebers , D. , and Higgins , B. Flame Lift-Off on Direct-Injection Diesel Sprays Under Quiescent Conditions SAE Technical Paper 2001-01-0530 2001 https://doi.org/10.4271/2001-01-0530
  19. Siebers , D. Liquid-Phase Fuel Penetration in Diesel Sprays SAE Technical Paper 980809 1998 https://doi.org/10.4271/980809
  20. Yamauchi , J. , Dong , P. , Nishida , K. , and Ogata , Y. Effects of Hole Diameter and Injection Pressure on Fuel Spray and Its Evaporation Characteristics of Multi-Hole Nozzle for Diesel Engine SAE Technical Paper 2017-01-2305 2017 https://doi.org/10.4271/2017-01-2305

Cited By

Recommended Content

Technical Paper Quantitative 2-D Fuel Distribution Measurements in an SI Engine Using Laser-Induced Fluorescence with Suitable Combination of Fluorescence Tracer and Excitation Wavelength
Technical Paper The Columbus Vacuum and Venting System- Concept Selection
Technical Paper An Investigation of Abnormal Spray Behaviors of Multi-Hole GDI Injector