Search tips
Open Access

Non-Contacting Finger Seal Piston for Oil Less Engines

Journal Article
2020-01-1096
ISSN: 2641-9645, e-ISSN: 2641-9645
DOI: https://doi.org/10.4271/2020-01-1096
Published April 14, 2020 by SAE International in United States
Non-Contacting Finger Seal Piston for Oil Less Engines
Sector:
Citation: Boudreau, P. and Picard, M., "Non-Contacting Finger Seal Piston for Oil Less Engines," SAE Int. J. Adv. & Curr. Prac. in Mobility 2(5):2828-2838, 2020, https://doi.org/10.4271/2020-01-1096.
Language: English

References

  1. Stanton , D.W. Systematic Development of Highly Efficient and Clean Engines to Meet Future Commercial Vehicle Greenhouse Gas Regulations SAE Int. J. Engines 6 3 1395 1480 2013 https://doi.org/10.4271/2013-01-2421
  2. Caton , J.A. Maximum Efficiencies for Internal Combustion Engines: Thermodynamic Limitations International Journal of Engine Research 19 10 1005 1023 2017 10.1177/1468087417737700
  3. Daw , S.C. , Graves , R.L. , Caton , J.A. , and Wagner , R.M. 2010
  4. Mohr , D. , Shipp , T. , and Lu , X. The Thermodynamic Design, Analysis and Test of Cummins’ Supertruck 2 50% Brake Thermal Efficiency Engine System SAE Technical Paper 2019-01-0247 2019 https://doi.org/10.4271/2019-01-0247
  5. Finneran , J. , Garner , C. , Bassett , M.D. , and Hall , J. 2018
  6. Morgan , R.E. , Jackson , N. , Atkins , A. , Dong , G. , Heikal , M. , and Lenartowicz , C.
  7. Owen , N. , Treccarichi , F. , Atkins , A. , Selvaraj , A. et al. A Practical Recuperated Split Cycle Engine for Low Emissions and High Efficiency SAE Technical Paper 2019-24-0190 2019 https://doi.org/10.4271/2019-24-0190
  8. Bryzik , W. and Stutor , P. Tribological Systems for High Temperature Diesel Engines SAE Technical Paper 870157 1987 https://doi.org/10.4271/870157
  9. Saad , P. , Kamo , L. , Mekari , M. , and Saad , D. High Temperature Lubricant for Advanced High Output Diesel Engine ASME Internal Combustion Engine Division 2007 Fall Technical Conference, ASME Charleston, South Carolina 2007 637 648 10.1115/ICEF2007-1759
  10. Ceramic Engineering and Science Proceedings Sliney , H.E. , Jacobson , T.P. , Deadmore , D. , and Miyoshi , K. Tribology of Selected Ceramics at Temperatures to 900°C Smothers , W. Hoboken, NJ, USA John Wiley & Sons, Inc 1986 1039 1051 10.1002/9780470320341.ch36 978-0-470-32034-1
  11. Bart , J.C.J. , Gucciardi , E. , and Cavallaro , S. Lubricants: Properties and Characteristics Biolubricants Elsevier 2013 24 73 10.1533/9780857096326.24 978-0-85709-263-2
  12. Wade , W.R. , Havstad , P.H. , Rao , V.D. , Aimone , M.G. , and Jones , C.M. A Structural Ceramic Diesel Engine - The Critical Elements SAE Technical Paper 870651 1987 https://doi.org/10.4271/870651
  13. Shapiro , W. 1984
  14. Chupp , R.E. , Hendricks , R.C. , Lattime , S.B. , and Steinetz , B.M. Sealing in Turbomachinery Journal of Propulsion and Power 22 2 313 349 2006 10.2514/1.17778
  15. Proctor , M.P. , Kumar , A. , and Delgado , I.R. High-Speed, High-Temperature Finger Seal Test Results Journal of Propulsion and Power 20 2 312 318 2004 10.2514/1.9256
  16. Proctor , M.P. and Delgado , I.R. Leakage and Power Loss Test Results for Competing Turbine Engine Seals Volume 4: Turbo Expo 2004, ASME Vienna, Austria 2004 441 451 978-0-7918-4169-3 10.1115/GT2004-53935
  17. Delgado , I. and Proctor , M. Continued Investigation of Leakage and Power Loss Test Results for Competing Turbine Engine Seals 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit American Institute of Aeronautics and Astronautics, Sacramento, California 2006 978-1-62410-038-3 10.2514/6.2006-4754
  18. Proctor , M. and Delgado , I. Preliminary Test Results of Non-Contacting Finger Seal on Herringbone-Grooved Rotor 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit American Institute of Aeronautics and Astronautics, Hartford, CT 2008 978-1-60086-992-1 10.2514/6.2008-4506
  19. Gibson , N. , Takeuchi , D. , Hynes , T. , and Malak , M. Second Generation Air-to-Air Mechanical Seal Design and Performance 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit American Institute of Aeronautics and Astronautics, San Diego, California 2011 978-1-60086-949-5 10.2514/6.2011-5636
  20. Proctor , M.P. Non-Contacting Finger Seals Static Performance Test Results at Ambient and High Temperatures 52nd AIAA/SAE/ASEE Joint Propulsion Conference American Institute of Aeronautics and Astronautics, Salt Lake City, UT 2016 978-1-62410-406-0 10.2514/6.2016-4921
  21. Baelden , C. 2014
  22. Wang , N. and Chang , C. An Application of Newton’s Method to the Lubrication Analysis of Air-Lubricated Bearings Tribology Transactions 42 2 419 424 1999 10.1080/10402009908982237
  23. Greenwood , J.A. and Tripp , J.H. The Contact of Two Nominally Flat Rough Surfaces Proceedings of the Institution of Mechanical Engineers 185 1 625 633 1970 10.1243/PIME_PROC_1970_185_069_02
  24. Chen , H. 2011
  25. Braun , M.J. , Pierson , H.M. , Kudriavtsev , V.V. , and Choy , F.K. 2002 171 225
  26. Temis , J.M. , Selivanov , A.V. , and Dzeva , I.J. Finger Seal Design Based on Fluid-Solid Interaction Model Volume 3A: Heat Transfer San Antonio, Texas 2013 9 10.1115/GT2013-95701
  27. Kline , S.E. 2016
  28. Chen , H. , Li , Y. , and Tian , T. A Novel Approach to Model the Lubrication and Friction between the Twin-Land Oil Control Ring and Liner with Consideration of Micro Structure of the Liner Surface Finish in Internal Combustion Engines SAE Technical Paper 2008-01-1613 2008 https://doi.org/10.4271/2008-01-1613
  29. Sato , O. , Takiguchi , M. , Takayuki , A. , Seki , Y. et al. Improvement of Piston Lubrication in a Diesel Engine by Means of Cylinder Surface Roughness SAE Technical Paper 2004-01-0604 2004 https://doi.org/10.4271/2004-01-0604
  30. Picard , M. , Tian , T. , and Nishino , T. Predicting Gas Leakage in the Rotary Engine-Part II: Side Seals and Summary Journal of Engineering for Gas Turbines and Power 138 6 062504 2016
  31. Wong , V.W. and Tung , S.C. Overview of Automotive Engine Friction and Reduction Trends-Effects of Surface, Material, and Lubricant-Additive Technologies Friction 4 1 1 28 2016 10.1007/s40544-016-0107-9

Cited By