Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Aging of a Multi-Hole Diesel Injector and Its Effect on the Rate of Injection

Journal Article
2020-01-0829
ISSN: 2641-9645, e-ISSN: 2641-9645
DOI: https://doi.org/10.4271/2020-01-0829
Published April 14, 2020 by SAE International in United States
Aging of a Multi-Hole Diesel Injector and Its Effect on the Rate of Injection
Sector:
Citation: Payri, R., Salvador, F., Gimeno, J., and Montiel, T., "Aging of a Multi-Hole Diesel Injector and Its Effect on the Rate of Injection," SAE Int. J. Adv. & Curr. Prac. in Mobility 2(6):3347-3355, 2020, https://doi.org/10.4271/2020-01-0829.
Language: English

References

  1. Johnson , T.V. Vehicular Emissions in Review SAE Int. J. Engines 5 2 216 234 2012 https://doi.org/10.4271/2012-01-0368
  2. Luján , J.M. , Climent , H. , Ruiz , S. , and Moratal , A. Influence of Ambient Temperature on Diesel Engine Raw Pollutants and Fuel Consumption in Different Driving Cycles Int. J. Engine Res. 20 8-9 877 888 2019
  3. Altenschmidt , F. , Banzhaf , G. , Kraus , E. , and Loll , S. The SI-Engine - At the End of Its Development? 16th Conference The Working Process of the Internal Combustion Engine 2017 35 49
  4. Payri , R. , De La Morena , J. , Monsalve-Serrano , J. , Pesce , F.C. et al. Impact of Counter-Bore Nozzle on the Combustion Process and Exhaust Emissions for Light-Duty Diesel Engine Application Int. J. Engine Res. 20 1 46 57 2019
  5. Han , S. , Kim , J. , and Bae , C. Effect of Air-Fuel Mixing Quality on Characteristics of Conventional and Low Temperature Diesel Combustion Appl. Energy 119 454 466 2014
  6. Musculus , M.P.B. , Miles , P.C. , and Pickett , L.M. Conceptual Models for Partially Premixed Low-Temperature Diesel Combustion 39 2-3 2013
  7. Giraldo , J.S. , Payri , R. , Marti-Aldaravi , P. , and Montiel , T. Effect of High Injection Pressures and Ambient Gas Properties over the Macroscopic Characteristics of the Diesel Spray on Multi-Hole Nozzles At. Sprays 28 12 1145 1160 2019
  8. Lee , S.H. , Jeong , D.Y. , Lee , J.T. , Ryou , H.S. et al. Investigations on Spray Characteristics under Ultra-High Injection Pressures Conditions Int. J. Automot. Technol. 6 2 125 131 Mar. 2005
  9. Nishida , K. , Jingyu , Z. , Xianyin , L. , and He , Z. Effects of Micro-Hole Nozzle and Ultra-High Injection Pressure on Air Entrainment, Liquid Penetration, Flame Lift-Off and Soot Formation of Diesel Spray Flame Int. J. Engine Res. 18 1-2 51 65 2017
  10. Moon , S. , Gao , Y. , Park , S. , Wang , J. et al. Effect of the Number and Position of Nozzle Holes on In- and Near-Nozzle Dynamic Characteristics of Diesel Injection Fuel 150 112 122 2015
  11. Payri , R. , Gimeno , J. , Martí-Aldaraví , P. , and Giraldo , J.S. Methodology for Phase Doppler Anemometry Measurements on a Multi-Hole Diesel Injector Exp. Tech. 41 2 1 8 2016
  12. Bardi , M. , Bruneaux , G. , and Malbec , L.-M. Study of ECN Injectors’ Behavior Repeatability with Focus on Aging Effect and Soot Fluctuations SAE Technical Paper 2016-01-0845 2016 https://doi.org/10.4271/2016-01-0845
  13. Hofmann , O. , Strauß , P. , Schuckert , S. , Huber , B. et al. Identification of Aging Effects in Common Rail Diesel Injectors Using Geometric Classifiers and Neural Networks SAE Technical Paper 2016-01-0813 2016 https://doi.org/10.4271/2016-01-0813
  14. Caprotti , R. , Breakspear , A. , Graupner , O. , Klaua , T. et al. Diesel Injector Deposits Potential in Future Fueling Systems SAE Technical Paper 2006-01-3359 2006 https://doi.org/10.4271/2006-01-3359
  15. Payri , F. , Bermúdez , V. , Payri , R. , and Salvador , F.J. The Influence of Cavitation on the Internal Flow and the Spray Characteristics in Diesel Iinjection Nozzles Fuel 83 4-5 419 431 2004
  16. Pehan , S. , Jerman , M.S. , Kegl , M. , and Kegl , B. Biodiesel Influence on Tribology Characteristics of a Diesel Engine Fuel 88 6 970 979 2009
  17. Leedham , A. , Caprotti , R. , Graupner , O. , and Klaua , T. Impact of Fuel Additives on Diesel Injector Deposits SAE Technical Paper 2004-01-2935 2004 https://doi.org/10.4271/2004-01-2935
  18. Hoang , A.T. and Le , A.T. A Review on Deposit Formation in the Injector of Diesel Engines Running on Biodiesel Energy Sources, Part A Recover. Util. Environ. Eff. 41 5 584 599 2019
  19. Ikemoto , M. , Omae , K. , Nakai , K. , Ueda , R. et al. Injection Nozzle Coking Mechanism in Common-Rail Diesel Engine SAE Int. J. Fuels Lubr. 5 1 78 87 2011 https://doi.org/10.4271/2011-01-1818
  20. Winterbone , D.E. , Clough , E. , Rao , K.K. , Richards , P. et al. The Effect of DI Nozzle Fouling on Fuel Spray Characteristics SAE Technical Paper 922232 1992 https://doi.org/10.4271/922232
  21. Richards , P. , Walker , R.D. , and Williams , D. Fouling of Two Stage Injectors - An Investigation into Some Causes and Effects SAE Technical Paper 971619 1997 https://doi.org/10.4271/971619
  22. Caprotti , R. , Bhatti , N. , and Nobuyuki , I. Protecting Diesel Fuel Injection Systems SAE Technical Paper 2011-01-1927 2011 https://doi.org/10.4271/2011-01-1927
  23. Liaquat , A.M. , Masjuki , H.H. , Kalam , M.A. , and Rizwanul Fattah , I.M. Impact of Biodiesel Blend on Injector Deposit Formation Energy 72 813 823 2014
  24. Urzędowska , W. and Stępień , Z. Prediction of Threats Caused by High FAME Diesel Fuel Blend Stability for Engine Injector Operation Fuel Process. Technol. 142 403 410 2016
  25. Ullmann , J. , Geduldig , M. , Stutzenberger , H. , Caprotti , R. et al. Investigation into the Formation and Prevention of Internal Diesel Injector Deposits SAE Technical Paper 2008-01-0926 2008 https://doi.org/10.4271/2008-01-0926
  26. Knecht , W. ECOS 2006 - Proc. 19th Int. Conf. Effic. Cost, Optim. Simul. Environ. Impact Energy Syst 33 1053 1059 2006
  27. ECN https://ecn.sandia.gov/diesel-spray-combustion/ 2010 www.sandia.gov/ecn/
  28. Schöppe , D. , Stahl , C. , Krüger , G. , and Dian , V. Servo-Driven Piezo Common Rail Diesel Injection System MTZ Worldw. 73 3 18 23 2012
  29. Pastor , J.V. , García , A. , Micó , C. , and García-Carrero , A.A. Experimental Study of Influence of Liquefied Petroleum Gas Addition in Hydrotreated Vegetable Oil Fuel on Ignition Delay, Flame Lift Off Length and Soot Emission under Diesel-Like Conditions Fuel 260 116377 2020
  30. Payri , R. , Salvador , F.J. , Bracho , G. , and Viera , A. Differences between Single and Double-Pass Schlieren Imaging on Diesel Vapor Spray Characteristics Appl. Therm. Eng. 125 220 231 2017
  31. Salvador , F.J. , Gimeno , J. , Carreres , M. , and Crialesi-Esposito , M. Fuel Temperature Influence on the Performance of a Last Generation Common-Rail Diesel Ballistic Injector. Part I: Experimental Mass Flow Rate Measurements and Discussion Energy Convers. Manag. 114 364 375 Apr. 2016
  32. Payri , R. , Gimeno , J. , Mata , C. , and Viera , A. Rate of Injection Measurements of a Direct-Acting Piezoelectric Injector for Different Operating Temperatures Energy Convers. Manag. 154 387 393 2018
  33. Payri , R. , De la Morena , J. , Pagano , V. , Hussain , A. et al. One-Dimensional Modeling of the Interaction between Close-Coupled Injection Events for a Ballistic Solenoid Injector Int. J. Engine Res. 20 4 452 469 2018
  34. Payri , R. , Garcia-Oliver , J.M. , Salvador , F.J. , and Gimeno , J. Using Spray Momentum Flux Measurements to Understand the Influence of Diesel Nozzle Geometry on Spray Characteristics Fuel 84 5 551 561 2005
  35. Viera , A. 2019
  36. Payri , R. , Salvador , F.J. , Gimeno , J. , and Bracho , G. A New Methodology for Correcting the Signal Cumulative Phenomenon on Injection Rate Measurements Exp. Tech. 32 Feb. 46 49 2008
  37. Plamondon , E. and Seers , P. Development of a Simplified Dynamic Model for a Piezoelectric Injector Using Multiple Injection Strategies with Biodiesel/Diesel-Fuel Blends Appl. Energy 131 411 424 2014
  38. Salvador , F.J. , Carreres , M. , Crialesi-Esposito , M. , and Plazas , A.H. Determination of Critical Operating and Geometrical Parameters in Diesel Injectors through One Dimensional Modelling, Design of Experiments and an Analysis of Variance Proc. Inst. Mech. Eng. Part D J. Automob. Eng. 232 13 1762 1781 Nov. 2018
  39. Payri , R. , Salvador , F.J. , Gimeno , J. , and García , A. Flow regime Effects over Non-Cavitating Diesel Injection Nozzles Proc. Inst. Mech. Eng. Part D J. Automob. Eng. 226 1 133 144 2012
  40. Payri , R. , Hardy , G. , Gimeno , J. , and Bautista , A. Analysis of Counterbore Effect in Five Diesel Common Rail Injectors Exp. Therm. Fluid Sci. 107 Feb. 69 78 2019

Cited By

Recommended Content

Technical Paper System Level 1-D Analysis of an Air-System for a Heavy-Duty Gasoline Compression Ignition Engine
Technical Paper Mapping Procedure Applied to General Engine Management System for Spark Plug Engines
Technical Paper Electronically Controlled High Pressure Unit Injector System for Diesel Engines