This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Numeric Study on Torsional Characteristics of Dual Mass Flywheel with Circumferential ARC Spring
Technical Paper
2019-01-0934
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The rapid development of automotive technology has promoted the application of higher efficiency engines, while also putting higher requirements on the control of crankshaft torsional vibration. The traditional clutch driven disc torsional vibration damper can no longer meet the current new vibration and noise reduction requirements. Under these circumstances adopting dual mass flywheel (DMF) could be an efficient measure to reduce powertrain torsional fluctuations.
For the sake of studying the torsional characteristics of DMF, a dual mass flywheel with circumstance arc spring (DMF-CS) is taken as the research subject. Firstly, According to lumped mass model, a multi-degree of freedom torsional vibration model of DMF-CS is established, which takes the mutual conversion of dry friction and viscous friction into consideration. Then, the overall and partial torsion characteristics of dual mass flywheel are obtained through numerical analysis. The results show that the DMF-CS exhibits hysteresis nonlinear torsion characteristics because of damping force, its torsional stiffness and damping characteristics are affected by flywheel speed, transmitted torque, amplitude and frequency of the fluctuating torque. Besides, the heat generated by the hysteresis characteristic in a loop is also affected by the factors mentioned.
Recommended Content
Authors
Citation
Zhang, L. and Wu, G., "Numeric Study on Torsional Characteristics of Dual Mass Flywheel with Circumferential ARC Spring," SAE Technical Paper 2019-01-0934, 2019, https://doi.org/10.4271/2019-01-0934.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 |
Also In
References
- Chen , D. and Guangqiang , W. Mathematical Modelling and Simulation of Epicycloidal Path Type Centrifugal Pendulum Vibration Absorber Applied on Three-Staged Stiffness Clutch Damper [J] International Journal of Vehicle Performance
- Welter , R. and Huang J. Manual Transmission Clutch Technologies - Two Steps Forward into Comfortable and Cost Effective Emission Reduction [C] 4th International CTI Symposium China Sep. 2015
- Sun , S. and Wu , G. Driveline Dynamics Modelling and Analysis of Automotive Launch Process [J] International Journal of Vehicle Performance.
- Walter , A. , Brummund , S. , Merz , B. , Kiencke , U. et al. Estimation of the Instantaneous Engine Torque for Vehicles with Dual Mass Flywheel (Dmf) [J] Advances in Automotive Control 5
- Schaper , U. , Sawodny , O. , Mahl , T. , and Blessing , U Modeling and Torque Estimation of an Automotive Dual Mass Flywheel [J] American Control Conference, 2009. ACC ‘09 1207 1212 10.1109/ACC.2009.5160136
- Nicola , A. and Sauer , B. Experimentelle ermittlung des dynamikverhaltens torsionselastischer antriebselemente ATZ 02 124 130
- Mahl , T. and Sawodny , O. Modelling of an Automotive Dual Mass Flywheel [J] IFAC Proceedings Volumes 43 517 523 2010 10.3182/20100913-3-US-2015.00069
- Hu , W. , Jiang , Z.F. , Zeng , R. , Chen , L. , and Wang , L.W. Study on Static Stiffness Model of Long Circumferential Spring Dual Mass Flywheel [J] China Mechanical Engineering. 25 24 3278 3281+3288 2014
- Zhao , G.M. 2013
- Chen , L 2013