This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Effects of Lambda on Knocking Characteristics and RON Rating

Journal Article
2019-01-0627
ISSN: 2641-9645, e-ISSN: 2641-9645
Published April 02, 2019 by SAE International in United States
Effects of Lambda on Knocking Characteristics and RON Rating
Sector:
Citation: Hoth, A., Pulpeiro Gonzalez, J., Kolodziej, C., and Rockstroh, T., "Effects of Lambda on Knocking Characteristics and RON Rating," SAE Int. J. Adv. & Curr. Prac. in Mobility 1(3):1188-1201, 2019, https://doi.org/10.4271/2019-01-0627.
Language: English

References

  1. ASTM D2699-15a Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel West Conshohocken, PA ASTM International 2015 10.1520/D2699-15A
  2. ASTM D2700-16 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel West Conshohocken, PA ASTM International 2016 10.1520/D2400-16
  3. Heywood , J. Internal Combustion Engine Fundamentals New York McGraw-Hill 1998 0-07-028637-X
  4. Waukesha CFR Detonation Meter Model 501-C (M-Series) and Associated Equipment Operation and Maintenance First Wisconsin 1996
  5. Huber , K. , Hauber , J. , Raba , A. , and Nell , R. New Test Procedure to Determine Fuel’s Knock Resistance MTZ-Motortechnische Zeitschrift 74 7/8 62 69 2013
  6. Swarts , A. , Yates , A. , Viljoen , C. , and Coetzer , R. Standard Knock Intensity Revisited: Atypical Burn Rate Characteristics identified in the CFR Octane Rating Engine SAE Technical Paper 2004-01-1850 2004 10.4271/2004-01-1850
  7. Swarts , A. , Yates , A. , Viljoen , C. , and Coetzer , R. A Further Study of Inconsistencies between Autoignition and Knock Intensity in the CFR Octane Rating Engine SAE Technical Paper 2005-01-2081 2005 10.4271/2005-01-2081
  8. Rockstroh , T. , Kolodziej , C. , Jespersen , M. , Goldsborough , S. et al. Insights into Engine Knock: Comparison of Knock Metrics across Ranges of Intake Temperature and Pressure in the CFR Engine SAE Technical Paper 2018-01-0210 2018 10.4271/2018-01-0210
  9. Hoth , A. , Kolodziej , C. , Rockstroh , T. , and Wallner , T. Combustion Characteristics of Match-Blended PRF and TSF Fuels with Ethanol in an Instrumented CFR Engine SAE Technical Paper 2018-01-1672 2018 10.4271/2018-01-1672
  10. Hauber , J. , Huber , K. , and Nell , R. New GKI - Gasoline Knock Index for Rating of Fuel’s Knock Resistance on an Upgraded CFR Test Engine SAE Technical Paper 2018-01-1743 2018
  11. Mittal , V. and Heywood , J. The Relevance of Fuel RON and MON to Knock Onset in Modern SI Engines SAE Technical Paper 2008-01-2414 2008 10.4271/2008-01-2414
  12. Mittal , V. and Heywood , J. The Shift in Relevance of Fuel RON and MON to Knock Onset in Modern SI Engines Over the Last 70 Years SAE Int. J. Engines 2 2 1 10 2010 10.4271/2009-01-2622
  13. Szybist , J. and Splitter , D. Understanding Chemistry-Specific Fuel Differences at a Constant RON in a Boosted SI Engine Fuel 217 370 381 2018 10.1016/j.fuel.2017.12.100
  14. Pulpeiro Gonzalez , J. , Kolodziej , C.P. and Rockstroh , T. Statistical Analysis of Fuel Effects on Cylinder Conditions Leading to End-Gas Autoignition in SI Engines Proceedings of the SAE 2019 World Congress
  15. Vuilleumier , D. , Kim , N. , Sjöberg , M. , Yokoo , N. et al. Effects of EGR Constituents and Fuel Composition on DISI Engine Knock: An Experimental and Modeling Study SAE Technical Paper 2018-01-1677 2018 10.4271/2018-01-1677
  16. Hoth , A. 14-9-2018
  17. Foong , T.
  18. Morganti , K. , Foong , T. , Brear , M. , Da Silva , G. et al. Design and Analysis of a Modified CFR Engine for the Octane Rating of Liquefied Petroleum Gases (LPG) SAE Int. J. Fuels Lubr. 7 1 283 300 2014 10.4271/2014-01-1474
  19. Arrigoni , V. , Cornetti , G.M. , Spallanzani , G. , Calvi , F. , and Tontodonati , A. High Speed Knock in S.I. Engines SAE Technical Paper 741056 1974 10.4271/741056
  20. AlRamadan , A. , Sarathy , M. , Khurshid , M. , and Badra , J. A Blending Rule for Octane Numbers of PRFs and TPRFs with Ethanol Fuel 180 175 186 2016 10.1016/j.fuel.2016.04.032
  21. Gage Products Co
  22. Kolodziej , C. and Wallner , T. Combustion Characteristics of Various Fuels during Research Octane Number Testing on an Instrumented CFR F1/F2 Engine Combustion Engines. 171 4 164 169 2017 10.19206/CE-2017-427
  23. Foong , T. , Morganti , K. , Brear , M. , da Silva , G. et al. The Effect of Charge Cooling on the RON of Ethanol/Gasoline Blends SAE Int. J. Fuels Lubr. 6 1 34 43 2013 10.4271/2013-01-0886
  24. Swarts , A. and Yates , A. Insights into the Role of Autoignition during Octane Rating SAE Technical Paper 2007-01-0008 2007 10.4271/2007-01-0008
  25. Sileghem , L. , Alekseev , V.A. , Vancoillie , J. , Nilsson , E.J.K. et al. Laminar Burning Velocities of Primary Reference Fuels and Simple Alcohols Fuel 115 32 40 2014 10.1016/j.fuel.2013.07.004
  26. Meng , Z. , Liang , K. , and Fang , J. Laminar Burning Velocities of Iso-Octane, Toluene, 1-Hexene, Ethanol and Their Quaternary Blends at Elevated Temperatures and Pressures Fuel 237 630 636 2019 10.1016/j.fuel.2018.10.072
  27. Sileghem , L. , Alekseev , V. , Vancoillie , J. , Van Geem , K. et al. Laminar Burning Velocity of Gasoline and the Gasoline Surrogate Components iso-Octane, n-Heptane and Toluene Fuel 112 355 365 2013 10.1016/j.fuel.2013.05.049

Cited By