This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Understanding the Effect of Inhomogeneous Mixing on Knocking Characteristics of Iso-Octane by Using Rapid Compression Machine

Journal Article
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 03, 2018 by SAE International in United States
Understanding the Effect of Inhomogeneous Mixing on Knocking Characteristics of Iso-Octane by Using Rapid Compression Machine
Citation: Cho, J. and Song, H., "Understanding the Effect of Inhomogeneous Mixing on Knocking Characteristics of Iso-Octane by Using Rapid Compression Machine," SAE Int. J. Engines 11(6):769-781, 2018,
Language: English


  1. Speth, R.L., Chow, E.W., Malina, R., Barrett, S.R. et al. , “Economic and Environmental Benefits of Higher-Octane Gasoline,” Environmental Science & Technology 48(12):6561-6568, 2014, doi:10.1021/es405557p.
  2. “Monthly Energy Review,” U.S. Energy Information Administration, 2017.
  3. Pasquier, N., Lecordier, B., Trinite, M., and Cessou, A. , “An Experimental Investigation of Flame Propagation through a Turbulent Stratified Mixture,” Proceedings of the Combustion Institute 31(1):1567-1574, 2007.
  4. Johansson, B., Neij, H., Aid, M., and Juhlin, G. , “Investigations of the Influence of Mixture Preparation on Cyclic Variations in a SI-Engine, Using Laser Induced Fluorescence,” SAE Technical Paper 950108 , 1995, doi:10.4271/950108.
  5. Satoh, T., Terashima, H., and Oshima, N. , “Effects of Fuel/Air Mixture Distribution on End-Gas Autoignition,” paper presented at the 26th International Colloquium on the Dynamics of Explosions and Reactive Systems, Boston, USA, 2017.
  6. Zhang, T., Sun, W., and Ju, Y. , “Multi-Scale Modeling of Detonation Formation with Concentration and Temperature Gradients in N-Heptane/Air Mixtures,” Proceedings of the Combustion Institute 36(1):1539-1547, 2017, doi:10.1016/j.proci.2016.06.192.
  7. Zeldovich, Y.B. , “Regime Classification of an Exothermic Reaction with Nonuniform Initial Conditions,” Combustion and Flame 39(2):211-214, 1980.
  8. Bradley, D., Morley, C., Gu, X., and Emerson, D. , “Amplified Pressure Waves during Autoignition: Relevance to CAI Engines,” SAE Technical Paper 2002-01-2868 , 2002, doi:10.4271/2002-01-2868.
  9. Gu, X., Emerson, D., and Bradley, D. , “Modes of Reaction Front Propagation from Hot Spots,” Combustion and Flame 133(1):63-74, 2003.
  10. Lutz, A.E., Kee, R. J., Miller, J. A., Dwyer, H. A., et al. "Dynamic Effects of Autoignition Centers for Hydrogen and C1, 2-Hydrocarbon Fuels,” paper presented at the Symposium (International) on Combustion, 1989.
  11. Bates, L., Bradley, D., Paczko, G., and Peters, N. , “Engine Hot Spots: Modes of Auto-Ignition and Reaction Propagation,” Combustion and Flame 166:80-85, 2016.
  12. Bradley, D. and Kalghatgi, G. , “Influence of Autoignition Delay Time Characteristics of Different Fuels on Pressure Waves and Knock in Reciprocating Engines,” Combustion and Flame 156(12):2307-2318, 2009.
  13. Tanoue, K., Jimoto, T., Kimura, T., Yamamoto, M. et al. , “Effect of Initial Temperature and Fuel Properties on Knock Characteristics in a Rapid Compression and Expansion Machine,” Proceedings of the Combustion Institute 36(3):3523-3531, 2017.
  14. Tanoue, K., Chado, Y., Jimoto, T., Nomura, T. et al. , “Effect of Autoignition Characteristics of Fuels on Knocking Properties,” International Journal of Engine Research 17(6):666-676, 2016.
  15. Dai, P., Chen, Z., Chen, S., and Ju, Y. , “Numerical Experiments on Reaction Front Propagation in N-Heptane/Air Mixture with Temperature Gradient,” Proceedings of the Combustion Institute 35(3):3045-3052, 2015, doi:10.1016/j.proci.2014.06.102.
  16. Dai, P., Qi, C., and Chen, Z. , “Effects of Initial Temperature on Autoignition and Detonation Development in Dimethyl Ether/Air Mixtures with Temperature Gradient,” Proceedings of the Combustion Institute 36(3):3643-3650, 2017, doi:10.1016/j.proci.2016.08.014.
  17. ASTM international , “Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel,” ASTM D2699-17, Rev. 2017.
  18. Foong, T.M., Morganti, K.J., Brear, M.J., da Silva, G., et al. , “The Effect of Charge Cooling on the RON of Ethanol/Gasoline Blends,” SAE Int. J. Fuels Lubr. 6(1): 34-43, 2013, doi:10.4271/2013-01-0886.
  19. Swarts, A., Yates, A., Viljoen, C., and Coetzer, R. , “Standard Knock Intensity Revisited: Atypical Burn Rate Characteristics Identified in the CFR Octane Rating Engine,” SAE Technical Paper 2004-01-1850 , 2004, doi:10.4271/2004-01-1850.
  20. Foong, T.M. , “On the Autoignition of Ethanol-Gasoline Blends in Spark-Ignition Engines,” Ph.D. thesis, The Department of Mechanical Engineering, The University of Melbourne, 2013.
  21. Cho, J. and Song, H.H. , “Understanding the Effect of External-EGR on Anti-Knock Characteristics of Various Ethanol Reference Fuel with RON 100 by Using Rapid Compression Machine,” Proceedings of the Combustion Institute 36(3):3507-3514, 2017.
  22. Oppenheim, A.K. and Kuhl, A. , “Life of Fuel in Engine Cylinder,” SAE Technical Paper 980780 , 1998, doi:10.4271/980780.
  23. Curran, H.J., Gaffuri, P., Pitz, W., and Westbrook, C.K. , “A Comprehensive Modeling Study of Iso-Octane Oxidation,” Combustion and Flame 129(3):253-280, 2002.
  24. Woschni, G. , “A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine,” SAE Technical Paper 670931 , 1967, doi:10.4271/670931.
  25. Ipp, W., Egermann, J., Schmitz, I., Wagner, V. et al. , “2D Mapping and Quantification of the In-Cylinder Air/Fuel-Ratio in a GDI Engine by Means of LIF and Comparison to Simultaneous Results from 1D Raman Measurements,” SAE Technical Paper 2001-01-1977 , 2001, doi:10.4271/2001-01-1977.
  26. Chan, S.H. and Zhu, J. , “Modelling of Engine In-Cylinder Thermodynamics under High Values of Ignition Retard,” International Journal of Thermal Sciences 40(1):94-103, 2001.
  27. Mittal, G. and Sung, C.-J. , “Aerodynamics inside a Rapid Compression Machine,” Combustion and Flame 145(1-2):160-180, 2006, doi:10.1016/j.combustflame.2005.10.019.
  28. Song, H. , “Development of Knock Prediction Model by Cool Flame Elimination Method Covering NTC Region: Modeling and Experimental Study,” Ph.D. thesis, Department of Mechanical Engineering, Seoul National University, Seoul, 2017.
  29. Goldsborough, S.S. , “A Chemical Kinetically Based Ignition Delay Correlation for Iso-Octane Covering a Wide Range of Conditions Including the NTC Region,” Combustion and Flame 156(6):1248-1262, 2009, doi:10.1016/j.combustflame.2009.01.018.

Cited By