Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Development of Chemistry-Based Laminar Flame Speed Correlation for Part-Load SI Conditions and Validation in a GDI Research Engine

Journal Article
2018-01-0174
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2018-01-0174
Published April 03, 2018 by SAE International in United States
Development of Chemistry-Based Laminar Flame Speed Correlation for Part-Load SI Conditions and Validation in a GDI Research Engine
Sector:
Citation: Del Pecchia, M., Breda, S., D'Adamo, A., Fontanesi, S. et al., "Development of Chemistry-Based Laminar Flame Speed Correlation for Part-Load SI Conditions and Validation in a GDI Research Engine," SAE Int. J. Engines 11(6):715-741, 2018, https://doi.org/10.4271/2018-01-0174.
Language: English

References

  1. Tutuianu , M. , Bonnel , P. , Ciuffo , B. , Haniu , T. et al. Development of the World-Wide Harmonized Light Duty Test Cycle (WLTC) and a Possible Pathway for Its Introduction in the European Legislation Transportation Research Part D: Transport and Environment 40 61 75 2015 10.1016/j.trd.2015.07.011 1361-9209
  2. Marotta , A. , Pavlovic , J. , Ciuffo , B. , Serra , S. et al. Gaseous Emissions from Light-Duty Vehicles: Moving from NEDC to the New WLTP Test Procedure Environmental Science & Technology 49 2015 10.1021/acs.est.5b01364
  3. Colin , O. and Benkenida , A. The 3-Zone Extended Coherent Flame Model (ECFM3Z) for Computing Premixed/Diffusion Combustion Oil & Gas Science and Technology 59 6 593 609 2004
  4. Peters , N. Turbulent Combustion Cambridge University Press 2000
  5. Veynante , D. and Vervisch , L. Turbulent Combustion Modeling Progress in Energy and Combustion Science 28 193 266 2002
  6. Metghalchi , M. and Keck , J.C. Burning Velocities of Mixtures of Air with Methanol, Isooctane, and Indolene at High Pressure and Temperature Combustion and Flame 48 191 210 1982
  7. Gulder , O. Laminar Burning Velocities of Methanol, Ethanol, and Isooctane-Air Mixtures Combustion Institute 1982 275 281
  8. Zhao , Z. , Conley , J. , Kazakov , A. , and Dryer , F. Burning Velocities of Real Gasoline Fuel at 353 K and 500 K SAE Technical Paper 2003-01-3265 2003 10.4271/2003-01-3265
  9. D’Adamo , A. , Del Pecchia , M. , Breda , S. , Berni , F. et al. Chemistry-Based Laminar Flame Speed Correlations for a Wide Range of Engine Conditions for Iso-Octane, N-Heptane, Toluene and Gasoline Surrogate Fuels SAE Technical Paper 2017-01-2190 2017 10.4271/2017-01-2190
  10. Bradley , D. , Sheppart , C.G.W. , Woolley , R. , Greenhalgh , D.A. et al. The Development and Structure of Flame Instabilities and Cellularity at Low Markstein Numbers in Explosions Combustion and Flame 122 1-2 195 209 2000 10.1016/S0010-2180(00)00113-9 0010-2180
  11. Bradley , D. , Hicks , R.A. , Lawes , M. , Sheppard , C.G.W. et al. The Measurement of Laminar Burning Velocities and Markstein Numbers for Iso-Octane-Air and Iso-Octane-N-Heptane-Air Mixtures at Elevated Temperatures and Pressures in an Explosion Bomb Combustion and Flame-Combust Flame 115 126 144 1998 10.1016/S0010-2180(97)00349-0
  12. Knop , V. , Benkenida , A. , Jay , S. , and Colin , O. Modelling of Combustion and Nitrogen Oxide Formation in Hydrogen-Fuelled Internal Combustion Engines within a 3D CFD Code International Journal of Hydrogen Energy 33 5083 5097 2008 10.1016/j.ijhydene.2008.06.027
  13. Jerzembeck , S. , Peters , N. , Pepiot-Desjardins , P. , and Pitsch , H. Laminar Burning Velocities at High Pressure for Primary Reference Fuels and Gasoline: Experimental and Numerical Investigation Combust and Flame 156 292 301 2009
  14. Rakopoulos , C.D. , Kosmadakis , G. , and Pariotis , E. Evaluation of a Combustion Model for the Simulation of Hydrogen Spark-Ignition Engines Using a CFD Code International Journal of Hydrogen Energy 35 12545 12560 2010 10.1016/j.ijhydene.2010.09.002
  15. Verhelst , S. 2005
  16. Gerke , U. , Steurs , K. , Rebecchi , P. , and Boulouchos , K. Derivation of Burning Velocities of Premixed Hydrogen/Air Flames at Engine Relevant Conditions Using a Single-Cylinder Compression Machine with Optical Access International Journal of Hydrogen Energy 35 2566 2577 2010
  17. Verhelst , S. , Vancoillie , J. , and Demuynck , J. A Correlation for the Laminar Burning Velocity for Use in Hydrogen Spark Ignition Engine Simulation Fuel and Energy Abstracts 36 2011 957-974. 10.1016/j.ijhydene.2010.10.020
  18. Ji , C. , Liu , X. , Wang , S. , Gao , B. et al. Development and Validation of a Laminar Flame Speed Correlation for the CFD Simulation of Hydrogen-Enriched Gasoline Engines International Journal of Hydrogen Energy 38 1997 2006 2013 10.1016/j.ijhydene.2012.11.139
  19. Di Sarli , V. and Di Benedetto , A. Laminar Burning Velocity of Hydrogen-Methane/Air Premixed Flames International Journal of Hydrogen Energy 32 367 346 2007
  20. Liu , X. , Ji , C. , Gao , B. , Wang , S. et al. A Laminar Flame Speed Correlation of Hydrogen-Methanol Blends Valid at Engine-Like Conditions International Journal of Hydrogen Energy 38 15500 15509 2013 10.1016/j.ijhydene.2013.09.031
  21. D'Adamo , A. , Berni , F. , Breda , S. , Lugli , M. et al. A Numerical Investigation on the Potentials of Water Injection as a Fuel Efficiency Enhancer in Highly Downsized GDI Engines SAE Technical Paper 2015-01-0393 2015 10.4271/2015-01-0393
  22. Sileghem , L. , Alekseev , V. , Vancoillie , J. , Van Geem , K. et al. Laminar Burning Velocity of Gasoline and the Gasoline Surrogate Components Iso-Octane, N-Heptane and Toluene Fuel 112 355 365 2013 10.1016/j.fuel.2013.05.049
  23. Szybist , J.P. and Splitter , D.A. Pressure and Temperature Effects on Fuels with Varying Octane Sensitivity at High Load in SI Engines Combustion and Flame 177 49 66 2017 10.1016/j.combustflame. 2016.12.002 0010-2180
  24. Ranzi , E. , Frassoldati , A. , Stagni , A. , Pelucchi , M. et al. International Journal of Chemical Kinetics 10.1002/kin.20867
  25. Cai , L. and Pitsch , H. Optimized Chemical Mechanism for Combustion of Gasoline Surrogate Fuels Combustion and Flame 162 1623 1637 2015
  26. Andrae , J.C.G. Comprehensive Chemical Kinetic Modeling of Toluene Reference Fuels Oxidation Fuel 107 740 748 2013 10.1016/j.fuel.2013.01.070 0016-2361
  27. Gauthier , B.M. , Davidson , D.F. , and Hanson , R.K. Combust Flame 139 300 311 2004
  28. Andrae , J.C.G. Development of a Detailed Kinetic Model for Gasoline Surrogate Fuels Fuel 87 2013 2022 2008
  29. Andrae , J.C.G. and Head , R.A. HCCI Experiments with Gasoline Surrogate Fuels Modeled by a Semidetailed Chemical Kinetic Model Combustion and Flame 156 842 851 2009
  30. Dirrenberger , P. , Glaude , P.A. , Bonaceur , R. , Le Gall , H. et al. Laminar Burning Velocity of Gasolines with Addition of Ethanol Fuel 115 162 169 2014
  31. Stagni , A. , Cuoci , A. , Frassoldati , A. , Faravelli , T. et al. Combustion and Flame 2015
  32. Stagni , A. , Cuoci , A. , Frassoldati , A. , Faravelli , T. et al. Lumping and Reduction of Detailed Kinetic Schemes: An Effective Coupling Industrial and Engineering Chemistry Research 53 22 9004 9016 2014 10.1021/ie403272f
  33. Kukkadapu , G. , Kumar , K. , Sung , C.J. , Mehl , M. et al. Experimental and Surrogate Modeling Study of Gasoline Ignition in a Rapid Compression Machine Combustion and Flame 159 3066 3078 2012 10.1016/j.combustflame.2012.05.008
  34. Giovannoni , N. , Breda , S. , Paltrinieri , S. , D'Adamo , A. et al. CFD Analysis of the Effects of Fuel Composition and Injection Strategy on Mixture Preparation and Fuel Deposit Formation in a GDI Engine SAE Technical Paper 2015-24-2408 2015 10.4271/2015-24-2408
  35. Malaguti , S. , Fontanesi , S. , and Severi , E. Numerical Analysis of GDI Engine Cold-Start at Low Ambient Temperatures SAE Technical Paper 2010-01-2123 2010 10.4271/2010-01-2123
  36. Bowditch , F. A New Tool for Combustion Research a Quartz Piston Engine SAE Technical Paper 610002 1961 10.4271/610002
  37. Irimescu , A. , Merola , S.S. , Tornatore , C. , and Valentino , G. Development of a Semi-Empirical Convective Heat Transfer Correlation Based on Thermodynamic and Optical Measurements in a Spark Ignition Engine Applied Energy 157 777 788 2015 10.1016/j.apenergy.2015.02.050
  38. Rakopoulos , C.D. , Kosmadakis , G.M. , Dimaratos , A.M. , and Pariotis , E.G. Investigating the Effect of Crevice Flow on Internal Combustion Engines Using a New Simple Crevice Model Implemented in a CFD Code Applied Energy 88 111 126 2011 10.1016/j.apenergy.2010.07.012
  39. Irimescu , A. , Tornatore , C. , Merola , S. , and Valentino , G. Combustion Process Investigation in a DISI Engine Fuelled with N-Butanol through Digital Imaging and Chemiluminescence SAE Technical Paper 2015-01-1887 2015 10.4271/2015-01-1887
  40. Breda , S. , D’Adamo , A. , Fontanesi , S. , D'Orrico , F. et al. Numerical Simulation of Gasoline and N-Butanol Combustion in an Optically Accessible Research Engine SAE Int. J. Fuels Lubr. 10 1 32 55 2017 10.4271/2017-01-0546
  41. Breda , S. , D'Adamo , A. , Fontanesi , S. , Giovannoni , N. et al. CFD Analysis of Combustion and Knock in an Optically Accessible GDI Engine SAE Int. J. Engines 9 1 641 656 2016 10.4271/2016-01-0601
  42. Han , Z. , Parrish , S. , Farrell , P.V. , and Reitz , R.D. Modeling Atomization Processes of Pressure-Swirl Hollow-Cone Fuel Sprays Atomization and Sprays 7 6 663 684
  43. Cavicchi , A. , Postrioti , L. , Giovannoni , N. , Fontanesi , S. et al. Numerical and Experimental Analysis of the Spray Momentum Flux Measuring on a GDI Injector Fuel 206 614 627 2017 10.1016/j.fuel.2017.06.054 0016-2361
  44. von Kuensberg Sarre , C. , Kong , S. , and Reitz , R. Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays SAE Technical Paper 1999-01-0912 1999 10.4271/1999-01-0912
  45. Boudier , P. , Henriot , S. , Poinsot , T. , and Baritaud , T. A Model for Turbulent Flame Ignition and Propagation in Spark Ignition Engines Symposium (International) on Combustion 24 1 503 510 1992 10.1016/S0082-0784(06)80064-0 0082-0784
  46. Berni , F. , Fontanesi , S. , Cicalese , G. , and D'Adamo , A. Critical Aspects on the Use of Thermal Wall Functions in CFD In-Cylinder Simulations of Spark-Ignition Engines SAE Int. J. Commer. Veh. 10 2 547 561 2017 10.4271/2017-01-0569
  47. Cicalese , G. , Berni , F. , Fontanesi , S. , D'Adamo , A. et al. A Comprehensive CFD-CHT Methodology for the Characterization of a Diesel Engine: From the Heat Transfer Prediction to the Thermal Field Evaluation SAE Technical Paper 2017-01-2196 2017 10.4271/2017-01-2196
  48. Berni , F. , Cicalese , G. and Fontanesi , S. A Modified Thermal Wall Function for the Estimation of Gas-to-Wall Heat Fluxes in CFD in-Cylinder Simulations of High Performance Spark-Ignition Engines Applied Thermal Engineering 115 1045 1062 2017 10.1016/j.applthermaleng.2017.01.055 1359-311

Cited By

Recommended Content

Technical Paper 1D Model for Correcting the Rate of Injection Signal Based on Geometry and Temperature Influence
Technical Paper Development of a CFD Solver for Primary Diesel Jet Atomization in FOAM-Extend
Technical Paper 4th Generation Diesel Piezo Injector (Realizing Enhanced High Response Injector)