This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Numerical Investigation on the Effects of Different Thermal Insulation Strategies for a Passenger Car Diesel Engine

Journal Article
2017-24-0021
ISSN: 1946-3936, e-ISSN: 1946-3944
Published September 04, 2017 by SAE International in United States
Numerical Investigation on the Effects of Different Thermal Insulation Strategies for a Passenger Car Diesel Engine
Sector:
Citation: Caputo, S., Millo, F., Cifali, G., and Pesce, F., "Numerical Investigation on the Effects of Different Thermal Insulation Strategies for a Passenger Car Diesel Engine," SAE Int. J. Engines 10(4):2154-2165, 2017, https://doi.org/10.4271/2017-24-0021.
Language: English

References

  1. ICCT Vehicle technology costs: Estimates vs. reality http://www.theicct.org/blogs/staff/vehicle-technology-costs-estimates-vs-reality 2015
  2. Morel , T. , Fort , E. , and Blumberg , P. Effect of Insulation Strategy and Design Parameters on Diesel Engine Heat Rejection and Performance SAE Technical Paper 850506 1985 10.4271/850506
  3. Morel , T. , Keribar , R. , Blumberg , P. , and Fort , E. Examination of Key Issues in Low Heat Rejection Engines SAE Technical Paper 860316 1986 10.4271/860316
  4. Morel , T. , Wahiduzzaman , S. , and Fort , E. Heat Transfer Experiments in an Insulated Diesel SAE Technical Paper 880186 1988 10.4271/880186
  5. Assanis , D. and Heywood , J. Development and Use of a Computer Simulation of the Turbocompounded Diesel System for Engine Performance and Component Heat Transfer Studies SAE Technical Paper 860329 1986 10.4271/860329
  6. Afify , E. and Klett , D. The Effect of Selective Insulation on the Performance, Combustion, and NO Emissions of a DI Diesel Engine SAE Technical Paper 960505 1996 10.4271/960505
  7. Tamilporai , P. , Baluswamy , N. , Jawahar , P. , Subramaniyam , S. et al. Simulation and Analysis of Combustion and Heat Transfer in Low Heat Rejection Diesel Engine Using Two Zone Combustion Model and Different Heat Transfer Models SAE Technical Paper 2003-01-1067 2003 10.4271/2003-01-1067
  8. Pawar , A. , Jajoo , B. , and Nandgaonkar , M. COMBUSTION ANALYSIS AND PERFORMANCE OF LOW HEAT REJECTION DIESEL ENGINE WITH DIFFERENT THERMAL INSULATION COATING SAE Technical Paper 2004-28-0012 2004 10.4271/2004-28-0012
  9. Miyairi , Y. Computer Simulation of an LHR DI Diesel Engine SAE Technical Paper 880187 1988 10.4271/880187
  10. Tovell , J. The Reduction of Heat Losses to the Diesel Engine Cooling System SAE Technical Paper 830316 1983 10.4271/830316
  11. Saad , D. , Saad , P. , Kamo , L. , Mekari , M. et al. Thermal Barrier Coatings for High Output Turbocharged Diesel Engine SAE Technical Paper 2007-01-1442 2007 10.4271/2007-01-1442
  12. Anderson , D. The Effects of Ceramic Port Insulation on Cylinder Head Performance in a Diesel Engine SAE Technical Paper 961745 1996 10.4271/961745
  13. De Paola , G. , Rabeau , F. , Knop , V. , Willems , W. et al. Modelling investigation of design approaches for Low Heat Rejection Diesel Engines SIA Powertrain Rouen 2016
  14. Serrano , J. , Arnau , F. , Martin , J. , Hernandez , M. et al. Analysis of Engine Walls Thermal Insulation: Performance and Emissions SAE Technical Paper 2015-01-1660 2015 10.4271/2015-01-1660
  15. Kosaka , H. , Wakisaka , Y. , Nomura , Y. , Hotta , Y. et al. Concept of “Temperature Swing Heat Insulation” in Combustion Chamber Walls, and Appropriate Thermo-Physical Properties for Heat Insulation Coat SAE Int. J. Engines 6 1 142 149 2013 10.4271/2013-01-0274
  16. Wakisaka , Y. , Inayoshi , M. , Fukui , K. , Kosaka , H. et al. Reduction of Heat Loss and Improvement of Thermal Efficiency by Application of “Temperature Swing” Insulation to Direct-Injection Diesel Engines SAE Int. J. Engines 9 3 1449 1459 2016 10.4271/2016-01-0661
  17. Kawaguchi , A. , Iguma , H. , Yamashita , H. , Takada , N. et al. Thermo-Swing Wall Insulation Technology; - A Novel Heat Loss Reduction Approach on Engine Combustion Chamber - SAE Technical Paper 2016-01-2333 2016 10.4271/2016-01-2333
  18. Kogo , T. , Hamamura , Y. , Nakatani , K. , Toda , T. et al. High Efficiency Diesel Engine with Low Heat Loss Combustion Concept - Toyota’s Inline 4-Cylinder 2.8-Liter ESTEC 1GD-FTV Engine - SAE Technical Paper 2016-01-0658 2016 10.4271/2016-01-0658
  19. Gamma Technologies GT-SUITE Flow Theory Manual 2016
  20. Piano , A. , Millo , F. , Boccardo , G. , Rafigh , M. et al. Assessment of the Predictive Capabilities of a Combustion Model for a Modern Common Rail Automotive Diesel Engine SAE Technical Paper 2016-01-0547 2016 10.4271/2016-01-0547
  21. Morel , T. and Keribar , R. A Model for Predicting Spatially and Time Resolved Convective Heat Transfer in Bowl-in-Piston Combustion Chambers SAE Technical Paper 850204 1985 10.4271/850204
  22. Piano , A. , Millo , F. , Postrioti , L. , Biscontini , G. et al. Numerical and Experimental Assessment of a Solenoid Common-Rail Injector Operation with Advanced Injection Strategies SAE Int. J. Engines 9 1 565 575 2016 10.4271/2016-01-0563
  23. Zaccardi , J.M. and De Paola , G. Fuel efficiency improvements for post-Euro 6 Diesel engines International Conference on Diesel Powertrains 3.0 Leipzig 2016
  24. Tanaka , H. , Fujita , M. , Yamamoto , T. , Muramatsu et al. Anodizing method for aluminum alloy by using high-frequency switching electrolysis Jsae 2011-32 2011 10.4271/2011-32-0645
  25. Durat , M. , Kapsiz , M. , Nart , E. , Ficici , F. et al. The effects of coating materials in spark ignition engine design Mater. Des. 36 540 545 2012 10.1016/j.matdes.2011.11.053
  26. Woschni , G. A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine SAE Technical Paper 670931 1967 10.4271/670931
  27. Gamma Technologies GT-SUITE Help Manual 2016
  28. Jennings , M. and Morel , T. A Computational Study of Wall Temperature Effects on Engine Heat Transfer SAE Technical Paper 910459 1991 10.4271/910459

Cited By