Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Extension and Validation of a 1D Model Applied to the Analysis of a Water Injected Turbocharged Spark Ignited Engine at High Loads and over a WLTP Driving Cycle

Journal Article
2017-24-0014
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2017-24-0014
Published September 04, 2017 by SAE International in United States
Extension and Validation of a 1D Model Applied to the Analysis of a Water Injected Turbocharged Spark Ignited Engine at High Loads and over a WLTP Driving Cycle
Sector:
Citation: Bozza, F., De Bellis, V., Giannattasio, P., Teodosio, L. et al., "Extension and Validation of a 1D Model Applied to the Analysis of a Water Injected Turbocharged Spark Ignited Engine at High Loads and over a WLTP Driving Cycle," SAE Int. J. Engines 10(4):2141-2153, 2017, https://doi.org/10.4271/2017-24-0014.
Language: English

References

  1. European Commission Regulation No. 443/2009: Off. J. Eur. Union., L 140, 1-15 http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=celex:32009R0443 February 2017
  2. European Environment Agency Annual European Union greenhouse gas inventory 1990-2012 and inventory report 2014, Report No.: 9/2014 2014
  3. Moriya , Y. , Watanabe , A. , Uda , H. , Kawamura , H. et al. A Newly Developed Intelligent Variable Valve Timing System - Continuously Controlled Cam Phasing as Applied to a New 3 Liter Inline 6 Engine SAE Technical Paper 960579 1996 10.4271/960579
  4. Sellnau , M. , Kunz , T. , Sinnamon , J. , and Burkhard , J. 2-step Variable Valve Actuation: System Optimization and Integration on an SI Engine SAE Technical Paper 2006-01-0040 2006 10.4271/2006-01-0040
  5. Kreuter , P. , Heuser , P. , and Schebitz , M. Strategies to Improve SI-Engine Performance by Means of Variable Intake Lift, Timing and Duration SAE Technical Paper 920449 1992 10.4271/920449
  6. Roberts , M. Benefits and Challenges of Variable Compression Ratio (VCR) SAE Technical Paper 2003-01-0398 2003 10.4271/2003-01-0398
  7. Shaik , A. , Moorthi , NSV. , Rudramoorthy , R. Variable Compression ratio engine: a future power plant for automobiles-an overview Proc. of the Istitution of Mechanical Engineers Part D: Journal of Aut. Eng. 221 9 1159 1168 2007 10.1243/09544070JAUTO573
  8. Wilcutts , M. , Switkes , J. , Shost , M. , and Tripathi , A. Design and Benefits of Dynamic Skip Fire Strategies for Cylinder Deactivated Engines SAE Int. J. Engines 6 1 278 288 2013 10.4271/2013-01-0359
  9. Francqueville , L. , Michel , J. On the Effects of EGR on Spark-Ignited Gasoline Combustion at High Load SAE Int J Engines 7 4 1808 1823 2014 10.4271/2014-01-2628
  10. Grandin , B. , Ångström , H. Replacing Fuel Enrichment in a Turbo Charged SI engine: Lean Burn or Cooled EGR SAE Paper 1999-01-3505 1999 10.4271/1999-01-3505
  11. Potteau , S. , Lutz , P. , Leroux , S. , Moroz , S. et al. Cooled EGR for a Turbo SI Engine to Reduce Knocking and Fuel Consumption SAE Technical Paper 2007-01-3978 2007 10.4271/2007-01-3978
  12. Alger , T. , Chauvet , T. , Dimitrova , Z. Synergies between High EGR Operation and GDI Systems SAE Int J Engines 1 1 101 114 2008 10.4271/2008-01-0134
  13. Lee , S. , Park , S. , Kim , C. , Kim , Y.M. , Kim , Y. , Park , C. Comparative study on EGR and lean burn strategies employed in an SI engine fueled by low calorific gas Applied Energy 129 10 16 2014 10.1016/j.apenergy.2014.04.082
  14. Lattimore , T. , Wang , C. , Xu , H. , Wyszynski , M.L. , Shuai , S. Investigation of EGR Effect on Combustion and PM Emissions in a DISI Engine Applied Energy 161 256 267 2016 10.1016/j.apenergy.2015.09.080
  15. Wei , H. , Zhu , T. , Shu , G. , Tan , L. , Wang , Y. Gasoline engine exhaust gas recirculation - A review Applied Energy 99 534 544 2012 10.1016/j.apenergy.2012.05.011
  16. Hoppe , F. , Thewes , M. , Baumgarten , H. and Dohmen , J. Water injection for gasoline engines: Potentials, challenges, and solutions International J of Engine Research 17 1 86 96 2016 10.1177/1468087415599867
  17. Soyelmez , M.S. , Ozcan , H. Water Injection Effects on the Performance of Four-Cylinder, LPG Fuelled SI Engine Open Access Scientific Reports 2 1 2013 10.4172/scientificreports.591
  18. Busuttil , D. , Farrugia , M. Experimental Investigation on the Effect of Injecting Water to the Air to Fuel Mixture in a Spark Ignition Engine MM (Modern Machinery) Science Journal 1 585 590 2015
  19. Iacobacci , A. , Marchitto , L. , and Valentino , G. Water Injection to Enhance Performance and Emissions of a Turbocharged Gasoline Engine under High Load Condition SAE Int. J. Engines 10 3 2017 10.4271/2017-01-0660
  20. Lanzafame , R. Water Injection Effects In A Single-Cylinder CFR Engine SAE Technical Paper 1999-01-0568 1999 10.4271/1999-01-0568
  21. Özkan H. , Söylemez M.S. Experimental Investigation of the Effects of Water Addition on the Exhaust Emissions of a Naturally Aspirated Liquefied-Petroleum-Gas fueled Engine Energy&Fuels 19 4 1468 1472 2005 10.1021/ef049850g
  22. Boretti , A. Water injection in directly injected turbocharged spark ignition engines Applied Thermal Engineering 52 1 62 68 2013 10.1016/j.applthermaleng.2012.11.016
  23. d'Adamo , A. , Berni , F. , Breda , S. , Lugli , M. et al. A Numerical Investigation on the Potentials of Water Injection as a Fuel Efficiency Enhancer in Highly Downsized GDI Engines SAE Technical Paper 2015-01-0393 2015 10.4271/2015-01-0393
  24. Siano , D. , Valentino , G. , Bozza , F. , Iacobacci , A. et al. A Non-Linear Regression Technique to Estimate from Vibrational Engine Data the Instantaneous In-Cylinder Pressure Peak and Related Angular Position SAE Technical Paper 2016-01-2178 2016 10.4271/2016-01-2178
  25. Bozza , F. , De Bellis , V. , Minarelli , F. , and Cacciatore , D. Knock and Cycle by Cycle Analysis of a High Performance V12 Spark Ignition Engine. Part 2: 1D Combustion and Knock Modeling SAE Int. J. Engines 8 5 2002 2011 2015 10.4271/2015-24-2393
  26. De Bellis , V. , Bozza , F. , Fontanesi , S. , Severi , E. et al. Development of a Phenomenological Turbulence Model through a Hierarchical 1D/3D Approach Applied to a VVA Turbocharged Engine SAE Int. J. Engines 9 1 506 519 2016 10.4271/2016-01-0545
  27. Morgan , N. , Smallbone , A. , Bhave , A. , Kraft , M. , Cracknell , R. , Kalghatgi , G. Mapping surrogate gasoline compositions into RON/MON space Combustion and Flame 157 6 1122 1131 2010 10.1016/j.combustflame.2010.02.003
  28. Tanaka , S. , Ayala , F. , Keck , J.C. A reduced chemical kinetic model for HCCI combustion of primary reference fuels in a rapid compression machine Combustion and Flame 133 4 467 481 2003 10.1016/S0010-2180(03)00057-9
  29. Liu , Y. , Jia , M. , Xie , M. , Pang , B. Development of a New Skeletal Chemical Kinetic Model of Toluene Reference Fuel with Application to Gasoline Surrogate Fuels for Computational Fluid Dynamics Engine Simulation Energy Fuels 27 8 4899 4909 2013 10.1021/ef4009955
  30. Andrae , J. Comprehensive chemical kinetic modeling of toluene reference fuels oxidation Fuel 107 740 748 2013 10.1016/j.fuel.2013.01.070
  31. De Bellis , V. , Severi , E. , Fontanesi , S. , Bozza , F. Hierarchical 1D/3D approach for the development of a turbulent combustion model applied to a VVA turbocharged engine. Part II: combustion model Energy Procedia 45 1027 1036 2014 10.1016/j.egypro.2014.01.108
  32. Douaud , A. and Eyzat , P. Four-Octane-Number Method for Predicting the Anti-Knock Behavior of Fuels and Engines SAE Technical Paper 780080 1978 10.4271/780080
  33. Lafossas , F. , Castagne , M. , Dumas , J. , and Henriot , S. Development and Validation of a Knock Model in Spark Ignition Engines Using a CFD code SAE Technical Paper 2002-01-2701 2002 10.4271/2002-01-2701
  34. Teodosio , L. , De Bellis , V. , and Bozza , F. Fuel Economy Improvement and Knock Tendency Reduction of a Downsized Turbocharged Engine at Full Load Operations through a Low-Pressure EGR System SAE Int. J. Engines 8 4 1508 1519 2015 10.4271/2015-01-1244
  35. Bozza , F. , De Bellis , V. , and Siano , D. A Knock Model for 1D Simulations Accounting for Cyclic Dispersion Phenomena SAE Technical Paper 2014-01-2554 2014 10.4271/2014-01-2554

Cited By