Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Piston Friction Reduction by Reducting Piston Compression Height for Large Bore Engine Applications

Journal Article
2017-01-1044
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2017-01-1044
Published March 28, 2017 by SAE International in United States
Piston Friction Reduction by Reducting Piston Compression Height for Large Bore Engine Applications
Sector:
Citation: Cheng, C. and Akinola, A., "Piston Friction Reduction by Reducting Piston Compression Height for Large Bore Engine Applications," SAE Int. J. Engines 10(4):1940-1947, 2017, https://doi.org/10.4271/2017-01-1044.
Language: English

References

  1. Richardson D. E. Review of power cylinder friction for diesel engines J. Eng. Gas Turbines Power 122 4 506 519
  2. Greenwoor J. , Tripp J. The Contact of Two Nominally Flat Surfaces Proc. Inst. Mech. Eners 185 625 1971
  3. Patir N. , Cheng H. Application of Average Flow Model to Lubrication Between Roughness Sliding Surfaces ASME J. Lubr. Technol. 101 220 230 1979
  4. Schneider C. , Wachtmeister G. , Klumpp P. , Halbhuber J. Improve Simulation of Plain Bearings in Dry and Mixed Lubrication Regime by Defining Locally Resolved Dry Friction Coefficients Tribology in Industry 37 2 2015 186 195
  5. Baker , C. , Rahmani , R. , Karagiannis , I. , Theodossiades , S. et al. Effect of Compression Ring Elastodynamics Behaviour upon Blowby and Power Loss SAE Technical Paper 2014-01-1669 2014 10.4271/2014-01-1669
  6. Sun D. C. A Thermal Elastica Theory of Piston-Ring and Cylinder Bore Contact Journal of Applied Mechanics March 1991 58
  7. Cheng C. , Wineland R. , Kharazmi A. , Schock H. , Brombolich L. Three dimensional piston ring-cylinder bore contact modeling ASME Journal of Engineering for Gas Turbine and Power, GTP-15-1063
  8. Cheng , C. , Kharazmi , A. , and Schock , H. Modeling of Piston Ring-Cylinder Bore-Piston Groove Contact SAE Technical Paper 2015-01-1724 2015 10.4271/2015-01-1724
  9. Poort M. , Cheng C. , Richardson D. , Schock H. Piston ring and groove side wear analysis for diesel engines ASME Journal of Engineering for Gas Turbine and Power, GTP-15-1060
  10. Cheng C. , Richardson D. , Schock H. The dynamics of second ring flutter and collapse in modern diesel engines ASME Journal of Engineering for Gas Turbine and Power, GTP-15-1061
  11. Panayi , A. , Schock , H. , Chui , B. , and Ejakov , M. Parameterization and FEA Approach for the Assessment of Piston Characteristics SAE Technical Paper 2006-01-0429 2006 10.4271/2006-01-0429
  12. Panayi , A. and Schock , J. Avenues for Predicting Piston Wear: Employing 2D and 3D Numerical Piston Dynamics Models SAE Int. J. Engines 1 1 713 722 2009 10.4271/2008-01-1044
  13. Kageyama , H. , Machida , S. , Shimanuki , S. , Suzuki , T. et al. Study of the Contact Pressures and Deformations of Piston Skirt in Gasoline Engine SAE Technical Paper 2000-01-1784 2000 10.4271/2000-01-1784
  14. Patel , P. , Mourelatos , Z. , and Shah , P. A Comprehensive Method for Piston Secondary Dynamics and Piston-Bore Contact SAE Technical Paper 2007-01-1249 2007 10.4271/2007-01-1249
  15. Keribar , R. and Dursunkaya , Z. A Comprehensive Model of Piston Skirt Lubrication SAE Technical Paper 920483 1992 10.4271/920483
  16. Wong , V. , Tian , T. , Lang , H. , Ryan , J. et al. A Numerical Model of Piston Secondary Motion and Piston Slap in Partially Flooded Elastohydrodynamic Skirt Lubrication SAE Technical Paper 940696 1994 10.4271/940696
  17. Nakayama , K. , Tamaki , S. , Miki , H. , and Takiguchi , M. The Effect of Crankshaft Offset on Piston Friction Force in a Gasoline Engine SAE Technical Paper 2000-01-0922 2000 10.4271/2000-01-0922
  18. Madden , D. , Kim , K. , and Takiguchi , M. Part 1: Piston Friction and Noise Study of Three Different Piston Architectures for an Automotive Gasoline Engine SAE Technical Paper 2006-01-0427 2006 10.4271/2006-01-0427
  19. Kim , K. , Godward , T. , Takiguchi , M. , and Aoki , S. Part 2: The Effects of Lubricating Oil Film Thickness Distribution on Gasoline Engine Piston Friction SAE Technical Paper 2007-01-1247 2007 10.4271/2007-01-1247
  20. Kim , K. , Shah , P. , Takiguchi , M. , and Aoki , S. Part 3: A Study of Friction and Lubrication Behavior for Gasoline Piston Skirt Profile Concepts SAE Technical Paper 2009-01-0193 2009 10.4271/2009-01-0193
  21. Dearlove , J. and Cheng , W. Simultaneous Piston Ring Friction and Oil Film Thickness Measurements in a Reciprocating Test Rig SAE Technical Paper 952470 1995 10.4271/952470
  22. Akalin O. , Newaz G. Piston Ring-Cylinder Bore Friction Modeling in Mixed Lubrication Regime: Part 1 - Analytical Results Journal of Tribology January 2001 123
  23. Westerfield , Z. , Totaro , P. , Kim , D. , and Tian , T. An Experimental Study of Piston Skirt Roughness and Profiles on Piston Friction Using the Floating Liner Engine SAE Technical Paper 2016-01-1043 2016 10.4271/2016-01-1043
  24. Kobayashi , T. Prediction of Piston Skirt Scuffing via 3D Piston Motion Simulation SAE Technical Paper 2016-01-1044 2016 10.4271/2016-01-1044
  25. Zheng X. , Hao Z. Y. , Lu Z. G. , Yang J. Separation of piston-slap and combustion shock excitations via MEEMD method Journal of Zhejiang University (Engineering Science) 2012 46 5 954 960
  26. Westerfield , Z. , Liu , Y. , Kim , D. , and Tian , T. A Study of the Friction of Oil Control Rings Using the Floating Liner Engine SAE Int. J. Engines 9 3 1807 1824 2016 10.4271/2016-01-1048
  27. Maurizi , M. and Hrdina , D. New MAHLE Steel Piston and Pin Coating System for Reduced TCO of CV Engines SAE Int. J. Commer. Veh. 9 2 270 275 2016 10.4271/2016-01-8066
  28. Panayi A. P. , Diaz A. R. , Schock H. J. On the optimization of piston skirt profile using a pseudo-adaptive response surface method Structural and Multidisciplinary Optimization 2009 38 317
  29. Song X. , Diaz A. R. , Benard A. and Nicholas J. D. 2012 A 2D model for shape optimization of solid oxide fuel cell cathodes Structural and Multidisciplinary Optimization 47 453 464
  30. Song X. , Diaz A. R. and Benard A. 2013 A 3D topology optimization model of the cathode air supply channel in planar solid oxide fuel cell Proceedings of the 10th World Congress on Structural and Multidisciplinary Optimization May 19-24 Orlando, Florida, USA
  31. Koizumi , T. , Tsujiuchi , N. , Okamura , M. , Kubomoto , I. et al. Reduction of Piston Slap Excitation with Optimization of Piston Profile SAE Technical Paper 2000-05-0317 2000
  32. AVL Advanced Simulation Technologies: Power Unit Theory guide for version 2016, AVL TM 2016
  33. Schneider C. , Wachtmeister G. , Klumpp P. , Halbhuber J. Improve Simulation of Plain Bearings in Dry and Mixed Lubrication Regime by Defining Locally Resolved Dry Friction Coefficients Tribology in Industry 37 2 2015 186 195

Cited By

Recommended Content

Technical Paper The Effect of Tumble Flow on Engine Performance and Flame Propagation
Technical Paper Design and Development of a Novel Balancing System for Single and In-Line Twin Cylinder Engines
Technical Paper Piston Ring Dynamics and Its Influence on the Power Cylinder Performance