Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Development and Application of Ring-Pack Model Integrating Global and Local Processes. Part 1: Gas Pressure and Dynamic Behavior of Piston Ring Pack

Journal Article
2017-01-1043
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2017-01-1043
Published March 28, 2017 by SAE International in United States
Development and Application of Ring-Pack Model Integrating Global and Local Processes. Part 1: Gas Pressure and Dynamic Behavior of Piston Ring Pack
Sector:
Citation: Liu, Y. and Tian, T., "Development and Application of Ring-Pack Model Integrating Global and Local Processes. Part 1: Gas Pressure and Dynamic Behavior of Piston Ring Pack," SAE Int. J. Engines 10(4):1927-1939, 2017, https://doi.org/10.4271/2017-01-1043.
Language: English

References

  1. Tian , T. Dynamic Behaviors of Piston Rings and Their Practical Impact. Part 1: Ring Flutter and Ring Collapse and Their Effects on Gas Flow and Oil Transport Proc IMechE, Part J: Journal of Engineering Tribology 216 209 227 2002
  2. Tian , T. Dynamic Behaviors of Piston Rings and Their Practical Impact. Part 2: Oil Transport, Friction, and Wear of Ring/Liner Interface and the Effects of Piston and Ring Proc IMechE, Part J: Journal of Engineering Tribology 216 229 247 2002
  3. Rabute , R. and Tian , T. Challenges involved in Piston Top Ring Designs for Modern SI Engines ASME Transaction -JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER 123 448 459 2001
  4. Przesmitzki , S. S. V. Characterization of oil transport in the power cylinder of internal combustion engines during steady state and transient operation Ph.D. Thesis Department of Mechanical Engineering, Massachusetts Institute of Technology Cambridge, MA 2008
  5. Senzer , E. B. Oil transport inside the oil control ring groove and its interaction with surrounding areas in internal combustion engines Ph.D. Thesis Department of Mechanical Engineering, Massachusetts Institute of Technology Cambridge, MA 2012
  6. Tian , T. , Noordzij , L. B. , Wong , V. W. and Heywood , J. B. Modeling Piston-Ring Dynamics, Blowby, and Ring-Twist Effects ASME Transaction - JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER 120 849 854 1998
  7. Tian , T. Modeling the Performance of the Piston Ring-Pack in Internal Combustion Engines Ph.D. Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 1997
  8. Tian , T. , Rabute , R. , Wong , V. , and Heywood , J. Effects of Piston-Ring Dynamics on Ring/Groove Wear and Oil Consumption in a Diesel Engine SAE Technical Paper 970835 1997 10.4271/970835
  9. Namazian , M. and Heywood , J. Flow in the Piston-Cylinder-Ring Crevices of a Spark-Ignition Engine: Effect on Hydrocarbon Emissions, Efficiency and Power SAE Technical Paper 820088 1982 10.4271/820088
  10. Keribar , R. , Dursunkaya , Z. and Flemming , M. F. An Integrated Model of Ring Pack Performance ASME Transaction - JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER 113 382 389 1991
  11. Ruddy , B. L. , Parsons , B. , Dowson D. and Economou , P. N. The Influence of Thermal Distortion and Wear of Piston Ring Groove upon the Lubrication of Piston Rings in Diesel Engines Leeds-Lyon Symposium on Tribology Lyon 1979
  12. Ejakov , M. , Schock , H. , and Brombolich , L. Modeling of Ring Twist For an IC Engine SAE Technical Paper 982693 1998 10.4271/982693
  13. Hu , Y. , Cheng , H. S. , Arai , Kobayashi, T., Y. and Aoyama , S. Numerical Simulation of Piston Ring in Mixed Lubrication - A Nonaxisymmetrical Analysis ASME Journal of Tribology 116 3 470 478 1994
  14. Ma , M.-T. , Sherrington , I. and Smith , E. H. Analysis of lubrication and friction for a complete piston-ring pack with an improved oil availability model: Part 1: Circumferentially uniform film Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 211 1 1 15 1997
  15. Ma , M.-T. , Sherrington , I. and Smith , E. H. Analysis of lubrication and friction for a complete piston-ring pack with an improved oil availability model: Part 2: Circumferentially variable film Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 211 1 17 27 1997
  16. Liu , L. and Tian , T. A three-dimensional model for piston ring-pack dynamics and blow-by gas flow ASME 2004 Internal Combustion Engine Division Fall Technical Conference 2004
  17. Liu , L. and Tian , T. Modeling Piston Ring-Pack Lubrication With Consideration of Ring Structural Response SAE Technical Paper 2005-01-1641 2005 10.4271/2005-01-1641
  18. Mittler , R. , Mierbach , A. , and Richardson , D. Understanding the fundamentals of piston ring axial motion and twist and the effects on blow-by In ASME 2009 Internal Combustion Engine Division Spring Technical Conference 721 735 American Society of Mechanical Engineers 2009
  19. Mittler , R. Detailed 3D ring pack analysis MTZ worldwide 71 7-8 2010 30 35
  20. Cheng , C. , Schock , H. and Richardson , D. The Dynamics of Second Ring Flutter and Collapse in Modern Diesel Engines Journal of Engineering for Gas Turbines and Power 137 11 2015 111504
  21. Cheng , C. , Kharazmi , A. , and Schock , H. Modeling of Piston Ring-Cylinder Bore-Piston Groove Contact SAE Technical Paper 2015-01-1724 2015 10.4271/2015-01-1724
  22. Liu , L. , Tian , T. , and Rabuté , R. Development and Applications of an Analytical Tool for Piston Ring Design SAE Technical Paper 2003-01-3112 2003 10.4271/2003-01-3112
  23. Tomanik , E. Improved Criterion for Ring Conformability Under Realistic Bore Deformation SAE Technical Paper 2009-01-0190 2009 10.4271/2009-01-0190
  24. Baelden , C. and Tian , T. A Dual Grid Curved Beam Finite Element Model of Piston Rings for Improved Contact Capabilities SAE Int. J. Engines 7 1 156 171 2014 10.4271/2014-01-1085
  25. Baelden , C. A multi-scale model for piston ring dynamics, lubrication and oil transport in internal combustion engines Ph.D. Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 2014
  26. Picard , M. , Baelden , C. , Tian , T. , Nishino , T. et al. Oil Transport Cycle Model for Rotary Engine Oil Seals SAE Int. J. Engines 7 3 1466 1476 2014 10.4271/2014-01-1664
  27. Picard , M. , Tian , T. and Nishino , T. Predicting Gas Leakage in the Rotary Engine - Part I: Apex and Corner Seals Journal of Engineering for Gas Turbines and Power 138 2016
  28. Picard , M. , Tian , T. and Nishino , T. Predicting Gas Leakage in the Rotary Engine- Part II: Side Seals and Summary Journal of Engineering for Gas Turbines and Power 138 2016
  29. Picard , M. , Tian , T. , and Nishino , T. Modeling of the Rotary Engine Apex Seal Lubrication SAE Technical Paper 2015-01-2035 2015 10.4271/2015-01-2035
  30. Greenwood , J. A. and Tripp , J. H. The contact of two nominally flat rough surfaces Proceedings of the institution of mechanical engineers 185 1 625 633 1970
  31. Bai , D. Modeling piston skirt lubrication in internal combustion engines Ph.D. Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 2012
  32. Totaro , P. Modeling Piston Secondary Motion, Skirt Lubrication and Applications Master Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 2014

Cited By

Recommended Content

Journal Article Development and Application of Ring-Pack Model Integrating Global and Local Processes. Part 2: Ring-Liner Lubrication
Technical Paper A Study of Decrease Oil Consumption for NSOR-Two-Ring Package Piston
Technical Paper Experimental Comparison Between Conventional and Bio-Derived Fuel Sprays