This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Development and Assessment of Pressure-Based and Model-Based Techniques for the MFB50 Control of a Euro VI 3.0L Diesel Engine

Journal Article
2017-01-0794
ISSN: 1946-3936, e-ISSN: 1946-3944
Published March 28, 2017 by SAE International in United States
Development and Assessment of Pressure-Based and Model-Based Techniques for the MFB50 Control of a Euro VI 3.0L Diesel Engine
Sector:
Citation: Finesso, R., Marello, O., Misul, D., Spessa, E. et al., "Development and Assessment of Pressure-Based and Model-Based Techniques for the MFB50 Control of a Euro VI 3.0L Diesel Engine," SAE Int. J. Engines 10(4):1538-1555, 2017, https://doi.org/10.4271/2017-01-0794.
Language: English

References

  1. Guido , C. , Beatrice , C. , Di Iorio , S. , Napolitano , P. et al. Assessment of Closed-Loop Combustion Control Capability for Biodiesel Blending Detection and Combustion Impact Mitigation for an Euro5 Automotive Diesel Engine SAE Technical Paper 2011-01-1193 2011 10.4271/2011-01-1193
  2. Saracino , R. , Gaballo , M. , Mannal , S. , Motz , S. et al. Cylinder Pressure-Based Closed Loop Combustion Control: A Valid Support to Fulfill Current and Future Requirements of Diesel Powertrain Systems SAE Technical Paper 2015-24-2423 2015 10.4271/2015-24-2423
  3. Chung , J. , Oh , S. , Min , K. , and Sunwoo , M. Real-time combustion parameter estimation algorithm for light-duty diesel engines using in-cylinder pressure measurement Applied Thermal Engineering 60 33 43 2013 10.4271/2009-01-1318
  4. Asad , U. , and Zheng M. Fast heat release characterization of a diesel engine International Journal of Thermal Sciences 47 1688 1700 2008 10.1016/j.ijthermalsci.2008.01.009
  5. Catania , A. , d’Ambrosio , S. , Finesso , R. , Spessa , E. et al. Combustion System Optimization of a Low Compression-Ratio PCCI Diesel Engine for Light-Duty Application SAE Int. J. Engines 2 1 1314 1326 2009 10.4271/2009-01-1464
  6. Ponti , F. , Ravaglioli , V. , Moro , D. , and Serra , G. MFB50 on-board estimation methodology for combustion control Control Engineering Practice 21 12 1821 1829 2013 10.1016/j.conengprac.2013.05.001
  7. Ponti , F. , Ravaglioli , V. , Serra , G. , and Stola , F. Instantaneous Engine Speed Measurement and Processing for MFB50 Evaluation SAE Int. J. Engines 2 2 235 244 2010 10.4271/2009-01-2747
  8. Ponti , F. , Ravaglioli , V. , Moro , D. , and Serra , G. Combustion control using a model-based MFB50 estimation methodology Proceedings of the 6th IFAC symposium advances in automotive control Munich 2010 10.3182/20100712-3-DE-2013.00122
  9. Finesso , R. and Spessa , E. A Feed-Forward Approach for the Real-Time Estimation and Control of MFB50 and SOI In Diesel Engines SAE Int. J. Engines 7 1 528 549 2014 10.4271/2014-01-9046
  10. Reitz , R. D. , and Rutland , C. J. Development and testing of diesel engine CFD models Progress in Energy and Combustion Science 21 2 173 196 1995 10.1016/0360-1285(95)00003-Z
  11. Cipolla , G. , Vassallo , A. , Catania , A. , Spessa , E. et al. Combined application of CFD modeling and pressure-based combustion diagnostics for the development of a low compression ratio high-performance diesel engine SAE Technical Paper 2007-24-0034 2007 10.4271/2007-24-0034
  12. Hiroyasu , H. Diesel engine combustion and its modeling Proceedings of the 1st International Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines Tokyo, Japan 1985
  13. Hiroyasu , H. , Kadota , T. , and Arai , M. Development and use of a spray combustion modeling to predict diesel engine efficiency and pollutant emissions: part 1 combustion modeling Bulletin of JSME 26 569 575 1983
  14. Jung , D. and Assanis , D. Multi-Zone DI Diesel Spray Combustion Model for Cycle Simulation Studies of Engine Performance and Emissions SAE Technical Paper 2001-01-1246 2001 10.4271/2001-01-1246
  15. Ponti , F. , Corti , E. , Serra , G. , and De Cesare , M. Common Rail Multi-Jet Diesel Engine Combustion Model Development for Control Purposes SAE Technical Paper 2007-01-0383 2007 10.4271/2007-01-0383
  16. Ravaglioli , V. , Moro , D. , Serra , G. , and Ponti , F. MFB50 On-Board Evaluation Based on a Zero-Dimensional ROHR Model SAE Technical Paper 2011-01-1420 2011 10.4271/2011-01-1420
  17. Arrègle , J. , García , J.M. , López , J.J. , Fenollosa , C. Development of a zero-dimensional Diesel combustion model. Part 1: Analysis of the quasi-steady diffusion combustion phase Applied Thermal Engineering 23 11 1301 1317 2003 10.1016/S1359-4311(03)00079-6
  18. Arrègle , J. , García , J.M. , López , J.J. , Fenollosa , C. Development of a zero-dimensional Diesel combustion model. Part 2: Analysis of the transient initial and final diffusion combustion phases Applied Thermal Engineering 23 11 1319 1331 2003 10.1016/S1359-4311(03)00080-2
  19. Chmela , F. and Orthaber , G. Rate of Heat Release Prediction for Direct Injection Diesel Engines Based on Purely Mixing Controlled Combustion SAE Technical Paper 1999-01-0186 1999 10.4271/1999-01-0186
  20. Egnell , R. A Simple Approach to Studying the Relation between Fuel Rate Heat Release Rate and NO Formation in Diesel Engines SAE Technical Paper 1999-01-3548 1999 10.4271/1999-01-3548
  21. Ryan , T. and Callahan , T. Homogeneous Charge Compression Ignition of Diesel Fuel SAE Technical Paper 961160 1996 10.4271/961160
  22. Ericson , C. , Westerberg , B. , Andersson , M. , and Egnell , R. Modelling Diesel Engine Combustion and NOx Formation for Model Based Control and Simulation of Engine and Exhaust Aftertreatment Systems SAE Technical Paper 2006-01-0687 2006 10.4271/2006-01-0687
  23. Grahn , M. , Olssonm , J.O. , and McKelvey , T. A Diesel Engine Model for Dynamic Drive Cycle Simulations 18th IFAC World Congress Milano (Italy) August 28 - September 2, 2011 10.3182/20110828-6-IT-1002.03541
  24. Tauzia , X. , Maiboom , A. , Chesse , P. , and Thouvenel , N. A new phenomenological heat release model for thermodynamical simulation of modern turbocharged heavy duty Diesel engines Applied Thermal Engineering 26 1851 1857 2006 10.1016/j.applthermaleng.2006.02.009
  25. Catania , A.E. , Finesso , R. , and Spessa , E. Predictive Zero-Dimensional Combustion Model for DI Diesel Engine Feed-Forward Control Energy Conversion and Management 52 10 3159 3175 2011 10.1016/j.enconman.2011.05.003
  26. Finesso , R. , Spessa , E. , Yang , Y. , Alfieri , V. et al. HRR and MFB50 Estimation in a Euro 6 Diesel Engine by Means of Control-Oriented Predictive Models SAE Int. J. Engines 8 3 1055 1068 2015 10.4271/2015-01-0879
  27. Baratta , M. , Finesso , R. , Misul , D. , and Spessa , E. Comparison between Internal and External EGR Performance on a Heavy Duty Diesel Engine by Means of a Refined 1D Fluid-Dynamic Engine Model SAE Int. J. Engines 8 5 1977 1992 2015 10.4271/2015-24-2389
  28. Hennings Och , S. , Moura , L.M. , Cocco Mariani , V. , Coelho , L.S. et al. Volumetric efficiency optimization of a single-cylinder D.I. diesel engine using differential evolution algorithm Applied thermal engineering 108 660 669 2016 10.1016/j.applthermaleng.2016.07.042
  29. Liu , B. , Zhao , C. , Zhang , F. , Cui , T. et al. Misfire detection of a turbocharged diesel engine by using artificial neural networks Applied thermal engineering 55 1-2 26 32 2013 10.1016/j.applthermaleng.2013.02.032
  30. Saraswati , S. , Agarwal , P.K. , and Chand , S. Neural networks and fuzzy logic-based spark advance control of SI engines Expert Systems with Applications 38 6 6916 6925 2011 10.1016/j.eswa.2010.12.032
  31. Barakat , M. and Abdelaziz , M. Neural Network Transmission Control SAE Technical Paper 2016-01-0089 2016 10.4271/2016-01-0089
  32. Uzun , A. Air mass flow estimation of diesel engines using neural network Fuel 117 Part A 833 838 2014 10.1016/j.fuel.2013.09.078
  33. Sardarmehni , T. , Keighobadi , J. , Menhaj , M.B. , and Rahmani , H. Robust predictive control of lambda in internal combustion engines using neural networks Archives of Civil and Mechanical Engineering 13 4 432 443 2013 10.1016/j.acme.2013.05.003
  34. Asik , J. , Peters , J. , Meyer , G. , and Tang , D. Transient A/F Estimation and Control Using a Neural Network SAE Technical Paper 970619 1997 10.4271/970619
  35. Yap , W.K. , Ho , T. , and Karri , V. Exhaust emissions control and engine parameters optimization using artificial neural network virtual sensors for a hydrogen-powered vehicle International Journal of Hydrogen Energy 37 10 8704 8715 2012 10.1016/j.ijhydene.2012.02.153
  36. Uzun , A. A parametric study for specific fuel consumption of an intercooled diesel engine using a neural network Fuel 93 189 199 2012 10.1016/j.fuel.2011.11.004
  37. Bennett , C. , Dunne , J.F. , Trimby , S. , and Richardson , D. Engine cylinder pressure reconstruction using crank kinematics and recurrently-trained neural networks Mechanical Systems and Signal Processing 85 126 145 2016 10.1016/j.ymssp.2016.07.015
  38. Janakiraman , V.M. , Nguyen , X. , and Assanis , D. Nonlinear identification of a gasoline HCCI engine using neural networks coupled with principal component analysis Applied Soft Computing 13 5 2375 2389 2013 10.1016/j.asoc.2013.01.006
  39. Heywood , J.B. Internal Combustion Engine Fundamentals McGraw-Hill Intern. Editions 1988
  40. Finesso , R. , and Spessa , E. Ignition delay prediction of multiple injections in diesel engines Fuel 119 1 170 190 2014 10.1016/j.fuel.2013.11.040
  41. Finesso , R. , Spessa , E. , and Yang , Y. Development and Validation of a Real-Time Model for the Simulation of the Heat Release Rate, In-Cylinder Pressure and Pollutant Emissions in Diesel Engines SAE Int. J. Engines 9 1 322 341 2016 10.4271/2015-01-9044
  42. Finesso R. , Spessa E. , and Yang , Y. Fast estimation of combustion metrics in DI Diesel Engines for control-oriented applications Energy Conversion and Management 112 254 273 2016 10.1016/j.enconman.2016.01.018
  43. D'Ambrosio S. , Hardy G. , Iemmolo D. , Mancarella A. et al. Steady-State and Transient Operations of a Euro VI 3.0L HD Diesel Engine with Innovative Model-Based and Pressure-Based Combustion Control Techniques SAE Int. J. Engines 10 3 1080 1092 2017 10.4271/2017-01-0695

Cited By