Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Impact of Rivet Head Height on the Tensile and Fatigue Properties of Lap Shear Self-Pierced Riveted CFRP to Aluminum

Journal Article
2017-01-0477
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2017-01-0477
Published March 28, 2017 by SAE International in United States
Impact of Rivet Head Height on the Tensile and Fatigue Properties of Lap Shear Self-Pierced Riveted CFRP to Aluminum
Sector:
Citation: Rao, H., Kang, J., Huff, G., Avery, K. et al., "Impact of Rivet Head Height on the Tensile and Fatigue Properties of Lap Shear Self-Pierced Riveted CFRP to Aluminum," SAE Int. J. Mater. Manf. 10(2):167-173, 2017, https://doi.org/10.4271/2017-01-0477.
Language: English

References

  1. Eusebi , E. Composite intensive vehicles: past present and future Struct. Mater. Challenges next Gener. Veh. Washington, DC US Dep. Commer. 1995
  2. Gjostein , N.A. Technology needs beyond PNGV Basic Needs Veh. Futur. New Orleans, Louisiana (5 January 1995) 1995
  3. Cai , W. , Wang , P.C. , and Yang , W. Assembly dimensional prediction for self-piercing riveted aluminum panels Int. J. Mach. Tools Manuf. 45 695 704 2005 10.1016/j.ijmachtools.2004.09.023
  4. Mortimer , J. Jaguar uses X350 car to pioneer use of self-piercing rivets Ind. Robot An Int. J. 28 192 198 2001 10.1108/01439910110389344
  5. Barnes , T.A. and Pashby , I.R. Joining techniques for aluminum spaceframes used in automobiles. Part II -adhesive bonding and mechanical fasteners J. Mater. Process. Technol. 99 72 79 2000 10.1016/S0924-0136(99)00361-1
  6. Fu , M. and Mallick , P.K. Fatigue of self-piercing riveted joints in aluminum alloy 6111 Int. J. Fatigue 25 3 183 189 2003 10.1016/S0142-1123(02)00115-9
  7. Lin , P. and Su , Z. Fatigue Behavior of Self-Piercing Rivets and Clinch Joints in Lap-Shear Specimens of Aluminum Sheets CLINCH JOINTS OF 6111-T4 Int. J. Fatigue 72 293 298 2013 10.4271/2013-01-1024
  8. Miyashita , Y. , Jack Teow , Y.C. , Karasawa , T. , Aoyagi , N. , Otsuka , Y. , and Mutoh , Y. Strength of adhesive aided SPR joint for AM50 magnesium alloy sheets Procedia Eng. 10 2532 2537 2011 10.1016/j.proeng.2011.04.417
  9. Abe , Y. , Kato , T. , and Mori , K. Self-piercing riveting of high tensile strength steel and aluminium alloy sheets using conventional rivet and die J. Mater. Process. Technol. 209 3914 3922 2009 10.1016/j.jmatprotec.2008.09.007
  10. Mori , K. , Kato , T. , Abe , Y. , and Ravshanbek , Y. Plastic joining of ultra high strength steel and aluminium alloy sheets by self piercing rivet\r\n CIRP Ann. - Manuf. Technol. 55 2 1 4 2006 10.1016/S0007-8506(07)60417-X
  11. Franco , G. Di , Fratini , L. , Pasta , A. , and Ruisi , V.F. On the self-piercing riveting of aluminium blanks and carbon fibre composite panels Int. J. Mater. Form. 6 1 137 144 2013 10.1007/s12289-011-1067-2
  12. Franco , G. Di , Fratini , L. , and Pasta , a. Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks Int. J. Adhes. Adhes. 41 24 32 2013 10.1016/j.ijadhadh.2012.10.008
  13. Zhang , J. and Yang , S. Self-piercing riveting of aluminum alloy and thermoplastic composites J. Compos. Mater. 2014 10.1177/0021998314535456
  14. Kroll , L. , Mueller , S. , Mauermann , R. , Gruetzner , R. , Technology , F. , Structures , L. , and Gmbh , E. Strength of Self-Piercing Riveted Joints for Cfrp / Aluminium Sheets 18 Th Int. Conf. Compos. Mater. 1 6 2011
  15. Kang , J. , Rao , H. , Zhang , R. , Avery , K. , and Su , X. Tensile and fatigue behaviour of self-piercing rivets of CFRP to aluminium for automotive application IOP Conf. Ser. Mater. Sci. Eng. 137 1 012 025 2016 10.1088/1757-899X/137/1/012025
  16. Han , L. , Chrysanthou , a. , Young , K.W. , and O’Sullivan , J.M. Characterization of fretting fatigue in self-piercing riveted aluminium alloy sheets Fatigue Fract. Eng. Mater. Struct. 29 646 654 2006 10.1111/j.1460-2695.2006.01045.x
  17. Han , L. and Chrysanthou , A. Evaluation of quality and behaviour of self-piercing riveted aluminium to high strength low alloy sheets with different surface coatings Mater. Des. 29 458 468 2008 10.1016/j.matdes.2006.12.020
  18. Pickin , C.G. , Young , K. , and Tuersley , I. Joining of lightweight sandwich sheets to aluminium using self-pierce riveting Mater. Des. 28 2361 2365 2007 10.1016/j.matdes.2006.08.003
  19. Franco , G. Di , Fratini , L. , and Pasta , A. Influence of the distance between rivets in self-piercing riveting bonded joints made of carbon fiber panels and AA2024 blanks Mater. Des. 35 342 349 2012 10.1016/j.matdes.2011.09.036
  20. Fiore , V. , Bella , G. Di , Galtieri , G. , Alagna , F. , Borsellino , C. , and Valenza , A. Mechanical Behaviour of Spr / Co-Cured Composite To Aluminium Joints ECCM15-15th European Conference of Composite Materials Venice, Italy 24 28 2012
  21. Fratini , L. and Ruisi , V.F. Self-piercing riveting for aluminium alloys-composites hybrid joints Int. J. Adv. Manuf. Technol. 43 1-2 61 66 2009 10.1007/s00170-008-1690-3
  22. Rupp , A. , Störzel , K. , and Grubisic , V. Computer Aided Dimensioning of Spot-Welded Automotive Structures SAE Technical Paper 950711 1995 10.4271/950711
  23. Godwin , E.W. , Matthews , F.L. A Review of the Strength of Joints in Fibre Reinforced Plastics - Mechanically-Fastened Joints Composites 11 July 150 160 1980

Cited By

Recommended Content

Technical Paper RingMashing to Low-Alloy Steel -Low-Cost Manufacturing Method of the Powertrain Components
Journal Article Modeling of Adaptive Energy Absorbing Steering Columns for Dynamic Impact Simulations
Technical Paper Experimental Study of Mixed Mode Fatigue Crack Growth of Automotive Structural Adhesive BM4601