This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Side Impact Pressure Sensor Predictions with Computational Gas and Fluid Dynamic Methods

Journal Article
2017-01-0379
ISSN: 1946-3936, e-ISSN: 1946-3944
Published March 28, 2017 by SAE International in United States
Side Impact Pressure Sensor Predictions with Computational Gas and Fluid Dynamic Methods
Sector:
Citation: Tyan, T., Shaner, L., Niesluchowski, M., Kochhar, N. et al., "Side Impact Pressure Sensor Predictions with Computational Gas and Fluid Dynamic Methods," SAE Int. J. Engines 10(2):420-456, 2017, https://doi.org/10.4271/2017-01-0379.
Language: English

References

  1. Nefske, D., "A Basic Airbag Model," SAE Technical Paper 720426, 1972, doi:10.4271/720426.
  2. Wang, J. and Nefske, D., "A New CAL3D Airbag Inflation Model," SAE Technical Paper 880654, 1988, doi:10.4271/880654.
  3. Malvern L.W. Introduction t the Mechanics of a Continuous Medium. Prentice-Hall: Englewood Cliffs, 1969.
  4. Noh W.F., CEL: A time-dependent two-space dimensional coupled Eulerian-Lagrangian code. In Methods in Computational Physics, Alder B., Fernbach S., and Rotenberg M. vol. 3. Academic Press: New York, 1964: 117-179.
  5. Frank R.M. and Lazarus R.B. Mixed Eulerian-Lagrangian Method. In Methods in Computational Physics, Vol. 3: Fundamental Methods in Hydrodynamics, Alder B., Fernback S., and Rotenberg M. (eds). Academic Press: New York, 1964: 47-67.
  6. Trulio J.G. Theory and Structure of the AFTON Codes. Report AFWL-TR-66-19, Air Force Weapons Laboratory: Kirtland Air Force Base, 1966.
  7. Hirt C. W., Amsden A.A., and Cook J.L. An arbitrary Lagrangian and Eulerian Computing Method for all Flow Speeds. J. Comput. Phys. 1974; 14:227-253. Reprinted in J. Comput. Phys. 1997; 135(2): 203-216.
  8. Donea J., Fasoli-Stella P. and Giuliani S., Lagrangian and Eulerian Finite Element Techniques for Transient Fluid-Structure Interaction Problems. In Trans. 4th Int. Conf. on Structural Mechanics in Reactor Technology, Paper B 1/2, San Francisco, 1977.
  9. Belytschko T., Kennedy J.M., and Schoeberle D.F., Quasi-Eulerian Finite Element Formulation for Fluid-Structure Interaction. Proceedings of Joint ASME/CSME Pressure Vessels and Piping Conference. ASME: New Youk, 1978:p. 13, ASME paper 78-PVP-60.
  10. Belytschko T., and Kennedy J.M., Computer Method for Subassembly simulation. Nucl. Eng. Des. 1978: 49:17-38.
  11. Hughes, T.J.R., Liu, W.K., and Zimmerman T, “Lagrangian Eulerian Finite Element Formulation for Viscous Flows”, Computer Methods in Applied Mechanics and Engineering Vol. 29 (1981), pp 329-349; Presented at the U.S.-Japan Conference on Interdisciplinary Finite Element Analysis, Cornell University, August 7-11, 1978.
  12. Bensor, D. J., “Computational Methods in Lagrangian and Eulerian hydrocodes”, Computer Methods in Applied Mechanics and Engineering, Vol. 99 (1991), pp 235-394.
  13. Olovsson, L., “On the Arbitrary Lagrangian-Eulerian Finite Element Method”, Ph.D. Thesis, Linkoping University, 2000.
  14. Hirth, A., Haufe, A., and Olovsson, L., “Airbag Simulation with LS-DYNA Past-Present-Future”, 6th European LS-DYNA User Conference, Gothenburg, Sweden May 29th & 30th, 2007.
  15. Ma, J. and Usman, M., : “Modeling of Fuel Sloshing Phenomena Considering Solid-Fluid Interaction”, 8th International LS-DYNA User Conference, Detroit, Michigan, 2004.
  16. Tang, B., Guha, S., Tyan, T., Doong, J. et al., "Simulation of Sloshing and Ballooning in Fuel Tanks for High Speed Impacts," SAE Technical Paper 2006-01-0314, 2006, doi:10.4271/2006-01-0314.
  17. Craig, R., Qu, T., Pan, L., Tyan, T. et al., "Crash Performance Simulation of a Multilayer Thermoplastic Fuel Tank with Manufacturing and Assembly Consideration," SAE Int. J. Mater. Manuf. 4(1):27-39, 2011, doi:10.4271/2011-01-0009.
  18. Souli, M. and Olovsson, L., “Fluid-Structure Interaction in LSDYNA: Industrial Applications”, 4th European LS-DYNA Users Conference, Ulm, 2003.
  19. Souli, M. and Olovsson, L, “ALE and Fluid-Structure Interaction Capabilities in LS-DYNA”, 7th International LSDYNA Users Conference, Dearborn, Michigan, 2002.
  20. McCallum, S.C. and Constantinou, C., “The Influence of Bird-Shape in Bird-Strike Analysis”, 5th European LS-DYNA Users Conference, Birmingham, 2005.
  21. Anghileri, M., Castelletti, L.-M., Invernizzi, F., and Mascheroni, M., “Birdstrike onto the Composite Intake of a Turbofan Engine”, 5th European LS-DYNA Users Conference, Birmingham, 2005.
  22. Gadala, M.S. and Wang, J., “ALE Formulation and its Application in Solid Mechanics”, Computer Methods in Applied Mechanics and Engineering, 1998, PP 33-55
  23. Movahhedy, M., Gadala, M.S. and Altintas, Y., “Simulation of the Orthogonal Metal Cutting Process using an Arbitrary Lagrangian-Eulerian Finite-Element Method”, Journal of Materials Processing Technology (2000), pp267-275.
  24. Slavik, T., “A Coupling of Empirical Explosive Blast Loads to ALE Air Domains in LS-DYNA”, 7th European LS-DYNA Users Conference, Dearborn, 2002.
  25. Lapoujade, V., Van Dorsselaer, N., Kevorkian, S., and Cheval, K., “A Study of Mapping Technique for Air Blast Modeling”, 11th International LS-DYNA Users Conference, Dearborn, 2010.
  26. Tabiei, A. and Chowdhury, M.R., “Transient Response of a Projectile in Gun Launch Simulation Using Lagrangian and ALE Methods”, 8th International LS-DYNA Users Conference, Dearborn, 2004.
  27. Hsieh, C., Vunnam M., Bhalsod, D., and Chen, H., “Comparative Study Using LS=DYNA ALE and S-ALE Methods for under body Mine Blast Simulations”, 2016 NDIA Ground Vehicle Systems Engineering and Technology Symposium, Novi, Michigan, August 2-4, 2016.
  28. Marklund, P. O., “Finite Element Simulation of Airbag Deployment and Optimization in Crashworthiness Design”, Ph.D. Thesis, Linkoping University, 2002.
  29. Marklund, P. O., and Nilsson, L., “Simulation of Airbag Deployment Using A Coupled Fluid-Structure Approach”, 7th International LS-DYNA Users Conference, Dearborn, 2002.
  30. Fokin, D., Lokhande, N., and Fredriksson, L., “On Airbag Simulation in LS-DYNA with the use of the Arbitrary Lagrangian-Eulerian Method”, 4th European LS-DYNA User Conference, Ulm, 2003.
  31. Haufe, A. and Weimar, K., “Fluid-Structure-Interaction Effects in Airbag Out-of-Position Load Cases: An Introduction to the ALE-framework in LS-DYNA”, 5th European LS-DYNA User Conference., Birmingham, 2005.
  32. Lian, W., "Development of a Benchmark Problem Set for Assessing Out-of-Position Simulation Capabilities," SAE Technical Paper 2004-01-1628, 2004, doi:10.4271/2004-01-1628.
  33. Olovsson, L., “Corpuscular Method for Airbag Deployment Simulation in LS-DYNA”, Publications ISBN 978-82-997587-0-3 and Impetus Report R32S-1 May, 2007.
  34. Feng, B., and Coleman, D., “Gas Dynamic Simulation of Curtain Airbag Deployment through Interior Trims”, 10th International LS-DYNA Users Conference, Dearborn, 2008.
  35. Lian, W., Bhalsod, D., and Olovsson, L., “Benchmark Study of the AIRBAG PARTICLE Method for Out-Of-Position Applications”, 10th International LS-DYNA Users Conference, Dearborn, 2008.
  36. Teng, H., Wang, J., and Bhalsod, D., “The Recent Progress and Potential Applications of Corpuscular Method in LS-DYNA”, 11th International LS-DYNA Users Conference, Dearborn, 2010.
  37. Lin, C. H., Cheng, Y. P., and Wang, J., “Evaluation of LSDYNA Corpuscular Particle Method for Side Impact Airbag Deployment Application”, 13th International LS-DYNA Users Conference, Dearborn, 2014.
  38. Machens, M., and Wessels, T., “Investigation Into The Rising Air Pressure Inside The Door During Side Impacts”, 6th European LS-DYNA User Conference, Gothenburg, Sweden May 29th & 30th, 2007.
  39. Lin, C. and Jerinsky, M., "Pressure Sensor Simulation Capability for Side Impact Sensing Calibration," SAE Technical Paper 2011-01-0105, 2011, doi:10.4271/2011-01-0105.
  40. Tyan, T., McClain, B., Arthurs, K., Rupp, J. et al., "Side Crash Pressure Sensor Prediction: An ALE Approach," SAE Int. J. Mater. Manf. 5(2):314-332, 2012, doi:10.4271/2012-01-0046.
  41. Tyan, T., McClain, B., Arthurs, K., Rupp, J. et al., "Side Crash Pressure Sensor Prediction: An Improved Corpuscular Particle Method," SAE Int. J. Mater. Manf. 5(2):285-303, 2012, doi:10.4271/2012-01-0043.
  42. Tyan, T., Arthurs, K., Rupp, J., Ko, C. et al., "Side Crash Pressure Sensor Prediction for Body-on-Frame Vehicles: An ALE Approach," SAE Int. J. Mater. Manf. 6(2):209-231, 2013, doi:10.4271/2013-01-0666.
  43. Tyan, T., Arthurs, K., Rupp, J., Parks, M. et al., "Side Crash Pressure Sensor Prediction for Unitized Vehicles: An ALE Approach," SAE Int. J. Mater. Manf. 6(2):184-208, 2013, doi:10.4271/2013-01-0657.

Cited By