Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Development of a High Turbulence, Low Particle Number, High Injection Pressure Gasoline Direct Injection Combustion System

Journal Article
2016-01-9046
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2016-01-9046
Published November 16, 2016 by SAE International in United States
Development of a High Turbulence, Low Particle Number, High Injection Pressure Gasoline Direct Injection Combustion System
Sector:
Citation: Peer, J., Backes, F., Sauerland, H., Härtl, M. et al., "Development of a High Turbulence, Low Particle Number, High Injection Pressure Gasoline Direct Injection Combustion System," SAE Int. J. Engines 9(4):2301-2311, 2016, https://doi.org/10.4271/2016-01-9046.
Language: English

References

  1. von Basshuysen Richard Ottomotor mit Direkteinspritzung: Verfahren, Systeme, Entwicklung, Potenzial 2nd Viewber+Teubner Wiesbaden 978-3-8348-0445-7 2005
  2. Europäische Union REGULATION (EC) No 715/2007 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCILof 20 June 2007on type approval of motor vehicles with respect to emissions from light passenger and commercialvehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information 2007
  3. Europäische Union COMMISSION REGULATION (EU) No 459/2012of 29 May 2012amending Regulation (EC) No 715/2007 of the European Parliament and of the Council and Commission Regulation (EC) No 692/2008 as regards emissions from light passenger and commercial vehicles (Euro 6) 2012
  4. Zhang , H. , Achleitner , E. , Jovovic , D. , Kull , E. et al. Herausforderungen an die Benzindirekteinspritzsysteme zur Einhaltung der EU6c Abgasgrenzwerte Haus der Technik Berlin 2014
  5. Hoffmann , G. , Befrui , B. , Berndorfer , A. , Piock , W. et al. Fuel System Pressure Increase for Enhanced Performance of GDi Multi-Hole Injection Systems SAE Int. J. Engines 7 1 519 527 2014 10.4271/2014-01-1209
  6. Bertsch , M. , Koch , T. , and Velji , A. Influence of charge motion and injection pressure on the particulate emission of a gasoline DI-SI engine at homogeneous, boosted operation SIA - Société des ingénieurs de l`automobile SIA Powertrain: The low CO2 spark ignition engine The low CO2 spark ignition engine of the future and its hybridization Versailles 2015
  7. Wurms , R. Dr.-Ing. , Budack , R. Dr.-Ing. , Gigo , M. Dr.-Ing. , Mendl , G. Dr.-Ing. et al. Der neue Audi 2.0l Motor mit innovativem Rightsizing - ein weiterer Meilenstein der TFSITechnologie: The new Audi 2.0l Engine with innovative Rightsizing - a further Milestone in the TFSI Technology Univ.- Prof. Dr. Lenz Hans Peter VDI 36. Internationales Wiener Motorensymposium 36. Internationales Wiener Motorensymposium Wien 7. - 8. Mai 2015 2015
  8. Zheng Yi , Lee Po-I , Matsumoto Atsushi , Xie Xingbin et al. CFD Simulation and Optical Engine Diagnostics of Mixture Formation Processes in DI Gasoline Engine with Flexible Valvetrain Proceedings of the FISITA 2012 World Automotive Congress 865 877 2012
  9. Yang , J. and Anderson , R. Fuel Injection Strategies to Increase Full-Load Torque Output of a Direct-Injection SI Engine SAE Technical Paper 980495 1998 10.4271/980495
  10. Costa , M. , Sementa , P. , Sorge , U. , Catapano , F. et al. Split Injection in a GDI Engine Under Knock Conditions: An Experimental and Numerical Investigation SAE Technical Paper 2015-24-2432 2015 10.4271/2015-24-2432
  11. Schauer , F. , Zimmer , T. , Bachhuber , M. , Scheller , M. et al. Development of a Model-Based HCCI Control Strategy for an Engine with a Fully Variable Valve Train SAE Technical Paper 2013-01-1667 2013 10.4271/2013-01-1667
  12. Eiser , A. , Doerr , J. , Jung , M. , and Adam , S. Der neue 1,8-l-TFSI-Motor von Audi: Teil 1: Grundmotor und Thermomanagement MTZ - Motortechnische Zeitschrift 72 6 466 474
  13. Heiduk , T. , Kuhn , M. , Stichlmeir , M. , and Unselt , F. Der neue 1,8-l-TFSI-Motor von Audi: TEIL 2: Gemischbildung, Brennverfahren und Aufladung MTZ - Motortechnische Zeitschrift 72 7-8 596 604
  14. Nakamura , M. , Hara , S. , Yamada , Y. , Takeda , K. et al. A Continuous Variable Valve Event and Lift Control Device (VEL) for Automotive Engines SAE Technical Paper 2001-01-0244 2001 10.4271/2001-01-0244
  15. Druault , P. , Guibert , P. , and Alizon , F. Use of proper orthogonal decomposition for time interpolation from PIV data: Application to the cycle-to-cycle variation analysis of incylinder engine flows
  16. Sukegawa Y. et al Numerical Simulation for Mixture Formation and Combustion in Direct Fuel Injection Gasoline Engines Proceedings of FISITA World Automotive Congress 2000
  17. Metghalichi , M. and Keck , J. Burning Velocities of Mixtures of Air with Methanol, Isooctane, and Indolene at High Pressure and Temperature Combustion and Flame 48 1982
  18. Damköhler , G. Der Einfluss der Turbulenz auf die Flammengeschwindigkeit in Gasgemischen Zeitschrift für Elektrochemie und angewandte physikalische Chemie 46 601 626 1940
  19. Kumano , K. and Yamaoka , S. Analysis of Knocking Suppression Effect of Cooled EGR in Turbo-Charged Gasoline Engine SAE Technical Paper 2014-01-1217 2014 10.4271/2014-01-1217
  20. Reitz , R.D. and Diwakar , R. Structure of High-Pressure Fuel Sprays SAE Technical Paper 870598 1987 10.4271/870598

Cited By

Recommended Content

Technical Paper CFD Investigation of Heat Transfer in a Diesel Engine with Diesel and PPC Combustion Modes
Technical Paper Effects of Injection Strategies on Fluid Flow and Turbulence in Partially Premixed Combustion (PPC) in a Light Duty Engine
Technical Paper CFD Study of Soot Reduction Mechanisms of Post-Injection in Spray Combustion