This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Experimental and Numerical Investigations on the Mechanisms Leading to the Accumulation of Particulate Matter in Lubricant Oil

Journal Article
2016-01-2182
ISSN: 1946-3936, e-ISSN: 1946-3944
Published October 17, 2016 by SAE International in United States
Experimental and Numerical Investigations on the Mechanisms Leading to the Accumulation of Particulate Matter in Lubricant Oil
Sector:
Citation: Laget, O., Malbec, L., Kashdan, J., Dronniou, N. et al., "Experimental and Numerical Investigations on the Mechanisms Leading to the Accumulation of Particulate Matter in Lubricant Oil," SAE Int. J. Engines 9(4):2030-2043, 2016, https://doi.org/10.4271/2016-01-2182.
Language: English

References

  1. Lockwood, F., Zhang, Z., Choi, S., and Yu, W., "Effect of Soot Loading on the Thermal Characteristics of Diesel Engine Oils," SAE Technical Paper 2001-01-1714, 2001, doi:10.4271/2001-01-1714.
  2. Dam, W., Willis, W., and Cooper, M., "The Impact of Additive Chemistry and Lubricant Rheology on Wear in Heavy Duty Diesel Engines," SAE Technical Paper 1999-01-3575, 1999, doi:10.4271/1999-01-3575.
  3. Mc Geehan, J., Alexander, W., Ziemer, J., Roby, S. et al., "The Pivotal Role of Crankcase Oil in Preventing Soot Wear and Extending Filter Life in Low Emission Diesel Engines," SAE Technical Paper 1999-01-1525, 1999, doi:10.4271/1999-01-1525.
  4. Suhre, B. and Foster, D., "In-Cylinder Soot Deposition Rates Due to Thermophoresis in a Direct Injection Diesel Engine," SAE Technical Paper 921629, 1992, doi:10.4271/921629.
  5. Eastwood, P. (2008) Particulate Emissions from Vehicles : Wiley-PEPublishing Series.
  6. Musculus, Mark P B; Pickett, Lyle M. (2005) Diagnostic considerations for optical laser-extinction measurements of soot in high-pressure transient combustion environments. In : Combustion and Flame, vol. 141, p. 371-391.
  7. de Francqueville, L., Bruneaux, G., and Thirouard, B., "Soot Volume Fraction Measurements in a Gasoline Direct Injection Engine by Combined Laser Induced Incandescence and Laser Extinction Method," SAE Int. J. Engines 3(1):163-182, 2010, doi:10.4271/2010-01-0346.
  8. Lückert P., Arnt S., Duvinage F., Kemmner M., Binz R., Stortz O., Reusch M., Braun T., Ellwanger S. The New Mercedes-Benz 4-Cylinder Diesel Engine OM654 - The Innovative Base Engine of the New Diesel Generation. 24th Aachen Colloquium Automobile and Engine Technology, pp 867-877 (2015).
  9. Tokura, N., Terasaka, K., and Yasuhara, S., "Process through which Soot Intermixes into Lubricating Oil of a Diesel Engine with Exhaust Gas Recirculation," SAE Technical Paper 820082, 1982, doi:10.4271/820082.
  10. Kashdan, J. and Thirouard, B., "A Comparison of Combustion and Emissions Behaviour in Optical and Metal Single-Cylinder Diesel Engines," SAE Int. J. Engines 2(1):1857-1872, 2009, doi:10.4271/2009-01-1963.
  11. Zolver M., Klahr D., Bohbot J., Laget O., Torres A., Reactive CFD in engines with a new unstructured parallel solver, Oil & Gas Sci. and Tech. 58(1), 2003, pp 33-46.
  12. Amsden, A.A., O’Rourke, P.J., Butler, T.D., KIVA-II, a Computer Program for Chemically Reactive Flows with Sprays, Report LA-11560-MS, Los Alamos National Laboratory,1989
  13. Hirt, C.W., Amsden, A.A., Cook, J.L., J. Comput. Phys. pp 14, pp 227, 1974
  14. Pracht, W.E., J. Comput. Phys. pp 17, pp 132, 1975
  15. Colin O., Benkenida A., The 3-zones extended coherent flame model (ECFM3Z) for computing premixed/diffusion combustion, Oil & Gas Sci. and Tech., 59( 6), pp 593-609, 2004
  16. Colin O., Pires de Cruz A., Jay S., Detailed chemistry based auto-ignition model including low temperature phenomena applied to 3-D engine calculations, Proceedings of the Combustion Institute, 30, pp 2649-2656, 2005
  17. Beard P., Towards a predictive modelling of transient injection conditions of Diesel sprays in DID engines, Proceedings of the ILASS Americas 18th Annual conference, Irvine, USA, 2005
  18. Martinot, S., Beard, P., Roesler, J., and Garo, A., "Comparison and Coupling of Homogeneous Reactor and Flamelet Library Soot Modeling Approaches for Diesel Combustion," SAE Technical Paper 2001-01-3684, 2001, doi:10.4271/2001-01-3684.
  19. Jay, S., Béard, P., and Pires da Cruz, A., "Modeling Coupled Processes of CO and Soot Formation and Oxidation for Conventional and HCCI Diesel Combustion," SAE Technical Paper 2007-01-0162, 2007, doi:10.4271/2007-01-0162.
  20. Habchi, C., Verhoeven, D., Huynh Huu, C., Lambert, L. et al., "Modeling Atomization and Break Up in High-Pressure Diesel Sprays," SAE Technical Paper 970881, 1997, doi:10.4271/970881.
  21. O'Rourke, P. and Amsden, A., "A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines," SAE Technical Paper 961961, 1996, doi:10.4271/961961.
  22. O'Rourke, P. and Amsden, A., "A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model," SAE Technical Paper 2000-01-0271, 2000, doi:10.4271/2000-01-0271.
  23. Han, Z. and Xu, Z., "Wall Film Dynamics Modeling for Impinging Sprays in Engines," SAE Technical Paper 2004-01-0099, 2004, doi:10.4271/2004-01-0099.
  24. Buda F., Bounaceur R., Warth V., Glaude P.A., Fournet R., Battin-Leclerc F., Progress toward a unified detailed kinetic model for the autoignition of alkanes from C4 to C10 between 600 and 1200 K, Combustion and flame, Vol. 142, pp. 170-186, 2005.

Cited By