This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Reduction of Cold-Start Emissions through Valve Timing in a GDI Engine

Journal Article
2016-01-0827
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 05, 2016 by SAE International in United States
Reduction of Cold-Start Emissions through Valve Timing in a GDI Engine
Sector:
Citation: Rodriguez, J. and Cheng, W., "Reduction of Cold-Start Emissions through Valve Timing in a GDI Engine," SAE Int. J. Engines 9(2):1220-1229, 2016, https://doi.org/10.4271/2016-01-0827.
Language: English

References

  1. Davis, Stacy, Diegel Susan, Boundy Ridge, and Moore Sheila. “Vehicle Technologies Market Report 2014.” Oak Ridge National Laboratory, 2015
  2. “European Vehicle Market Statistics, 2014.” International Council on Clean Transportation, 2014.
  3. Chen, Hai-Ying, and Chang Hsiao-Lan (Russell). “Development of Low Temperature Three-Way Catalysts for Future Fuel Efficient Vehicles.” Johnson Matthey Technology Review 59, no. 1 (January 1, 2015): 64-67. doi:10.1595/205651315X686011.
  4. Myung, Cha-Lee, Kim Juwon, Jang Wonwook, Jin Dongyoung, Park Simsoo, and Lee Jeongmin. “Nanoparticle Filtration Characteristics of Advanced Metal Foam Media for a Spark Ignition Direct Injection Engine in Steady Engine Operating Conditions and Vehicle Test Modes.” Energies 8, no. 3 (March 9, 2015): 1865-81. doi:10.3390/en8031865.
  5. Rodriguez, J. and Cheng, W., "Effect of Operation Strategy on First Cycle CO, HC, and PM/PN Emissions in a GDI Engine," SAE Int. J. Engines 8(3):1098-1106, 2015, doi:10.4271/2015-01-0887.
  6. Rodriguez, J. Felipe, and Cheng Wai K.. “Fuel Carbon Pathway in the First Cranking Cycle of a Gasoline Direct Injection Engine.” International Journal of Engine Research, October 5, 2015. doi:10.1177/1468087415609852.
  7. Cedrone, K. and Cheng, W., "Using Valve Timing and Exhaust Back Pressure to Improve Catalyst Warm-Up Time," SAE Technical Paper 2013-01-2656, 2013, doi:10.4271/2013-01-2656.
  8. Cedrone, K. and Cheng, W., "SI Engine Control in the Cold-Fast-Idle Period for Low HC Emissions and Fast Catalyst Light Off," SAE Int. J. Engines 7(2):968-976, 2014, doi:10.4271/2014-01-1366.
  9. Ketterer, J. and Cheng, W., "On the Nature of Particulate Emissions from DISI Engines at Cold-Fast-Idle," SAE Int. J. Engines 7(2):986-994, 2014, doi:10.4271/2014-01-1368.
  10. Silvis, William M. “The Algorithmic Structure of the Air/Fuel Ration Calculation.” Readout HORIBA Technical Reports 15 (1997): 17-24.
  11. Lang, K., Cheng, W., Borland, M., Thomas, C. et al., "Effect of Intake Cam Phasing on First Cycle Fuel Delivery and HC Emissions in an SI Engine," SAE Technical Paper 2004-01-1852, 2004, doi:10.4271/2004-01-1852.
  12. Roth, D., Sisson, J., Gardner, M., and Wing, B., "Valve-Event Duration Reduction Through Ultra-Fast Phaser Actuation," SAE Technical Paper 2007-01-1281, 2007, doi:10.4271/2007-01-1281.
  13. Sellnau, M., Kunz, T., Sinnamon, J., and Burkhard, J., "2-step Variable Valve Actuation: System Optimization and Integration on an SI Engine," SAE Technical Paper 2006-01-0040, 2006, doi:10.4271/2006-01-0040.
  14. Linstrom, P.J., and Mallard W.G.. NIST Chemistry WebBook, NIST Standard Reference Database Number 69. Gaithersburg MD, 20899: National Institute of Standards and Technology. Accessed June 6, 2015. http://webbook.nist.gov.
  15. Schmitz, I., Ipp, W., and Leipertz, A., "Flash Boiling Effects on the Development of Gasoline Direct-Injection Engine Sprays," SAE Technical Paper 2002-01-2661, 2002, doi:10.4271/2002-01-2661.
  16. Koga, N., Miyashita, S., Takeda, K., and Imatake, N., "An Experimental Study on Fuel Behavior During the Cold Start Period of a Direct Injection Spark Ignition Engine," SAE Technical Paper 2001-01-0969, 2001, doi:10.4271/2001-01-0969.
  17. Haynes, B.S., and Wagner H.Gg.. “Soot Formation.” Progress in Energy and Combustion Science 7, no. 4 (1981): 229-73. doi:10.1016/0360-1285(81)90001-0.
  18. Hedge, M., Weber, P., Gingrich, J., Alger, T. et al., "Effect of EGR on Particle Emissions from a GDI Engine," SAE Int. J. Engines 4(1):650-666, 2011, doi:10.4271/2011-01-0636.
  19. Heywood, John B. Internal Combustion Engine Fundamentals. New York: McGraw-Hill, 1988.

Cited By