Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Progress Review on Soot Experiments and Modeling in the Engine Combustion Network (ECN)

Journal Article
2016-01-0734
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2016-01-0734
Published April 05, 2016 by SAE International in United States
A Progress Review on Soot Experiments and Modeling in the Engine Combustion Network (ECN)
Sector:
Citation: Skeen, S., Manin, J., Pickett, L., Cenker, E. et al., "A Progress Review on Soot Experiments and Modeling in the Engine Combustion Network (ECN)," SAE Int. J. Engines 9(2):883-898, 2016, https://doi.org/10.4271/2016-01-0734.
Language: English

References

  1. Meijer , M. et al. Engine Combustion Network (ECN): Characterization and comparison of boundary conditions for different combustion vessels Atomization and Sprays 22 9 777 806 2012 10.1615/AtomizSpr.2012006083
  2. Kastengren , A.L. et al. Engine combustion network (ECN): measurements of nozzle geometry and hydraulic behavior Atomization and Sprays 22 12 1011 1052 2012 10.1615/AtomizSpr.2013006309
  3. Manin , J. , Bardi M. , and Pickett L. Evaluation of the liquid length via diffused back-illumination imaging in vaporizing diesel sprays COMODIA Fukuoka, Japan July 23-26, 2012
  4. Manin , J. , Kastengren A. , and Payri R. Understanding the acoustic oscillations observed in the injection rate of a common-rail direct injection diesel injector Journal of engineering for gas turbines and power 134 12 122801 2012
  5. Bardi , M. et al. Engine combustion network: comparison of spray development, vaporization, and combustion in different combustion vessels Atomization and Sprays 22 10 807 842 2012 10.1615/AtomizSpr.2013005837
  6. Siebers , D. Liquid-Phase Fuel Penetration in Diesel Sprays SAE Technical Paper 980809 1998 10.4271/980809
  7. Verhoeven , D. , Vanhemelryck , J. , and Baritaud , T. Macroscopic and Ignition Characteristics of High-Pressure Sprays of Single-Component Fuels SAE Technical Paper 981069 1998 10.4271/981069
  8. Pickett , L. , Genzale , C. , Bruneaux , G. , Malbec , L. et al. Comparison of Diesel Spray Combustion in Different High-Temperature, High-Pressure Facilities SAE Int. J. Engines 3 2 156 181 2010 10.4271/2010-01-2106
  9. Payri , R. et al. Fuel temperature influence on diesel sprays in inert and reacting conditions Applied Thermal Engineering 35 185 195 2012 10.1016/j.applthermaleng.2011.10.027
  10. Cenker , E. , Bruneaux , G. , Pickett , L. , and Schulz , C. Study of Soot Formation and Oxidation in the Engine Combustion Network (ECN), Spray A: Effects of Ambient Temperature and Oxygen Concentration SAE Int. J. Engines 6 1 352 365 2013 10.4271/2013-01-0901
  11. Manin , J. , Pickett L.M. , and Skeen S.A. Two-color diffused back-illumination imaging as a diagnostic for time-resolved soot measurements in reacting sprays SAE International Journal of Engines 6 4 1908 1921 2013 10.4271/2013-01-2548
  12. Ghandhi , J. and Heim D. An optimized optical system for backlit imaging Review of scientific instruments 80 5 056105 2009
  13. Westlye , F.R. et al. Diffuse back-light illumination setup for high temporal resolution extinction imaging Applied Optics 2016
  14. Cenker , E. et al. Assessment of soot particle-size imaging with LII at Diesel engine conditions Applied Physics B 119 4 765 776 2015
  15. Kook , S. and Pickett L.M. Soot volume fraction and morphology of conventional and surrogate jet fuel sprays at 1000-K and 6.7-MPa ambient conditions Proceedings of the Combustion Institute 33 2 2911 2918 2011
  16. Aizawa , T. , Nishigai , H. , Kondo , K. , Yamaguchi , T. et al. Transmission Electron Microscopy of Soot Particles Directly Sampled in Diesel Spray Flame - A Comparison between US#2 and Biodiesel Soot SAE Int. J. Fuels Lubr . 5 2 665 673 2012 10.4271/2012-01-0695
  17. Xue , Q. et al. Large eddy simulation of fuel-spray under non-reacting IC engine conditions 23 10 925 955 2013 10.1615/AtomizSpr.2013008320
  18. Luo , Z. et al. Development and validation of an ndodecane skeletal mechanism for spray combustion applications Combustion Theory and Modelling 18 2 187 203 2014 10.1080/13647830.2013.872807
  19. Hiroyasu , H. and Kadota , T. Models for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Diesel Engines SAE Technical Paper 760129 1976 10.4271/760129
  20. Som , S. Development and validation of spray models for inestigating diesel engine combustion and emissions Ph.D. thesis Mechanical Engineering Department, University of Illinois at Chicago Chicago 2009
  21. Som , S. and Aggarwal S. Effects of primary breakup modeling on spray and combustion characteristics of compression ignition engines Combustion and Flame 157 6 1179 1193 2010
  22. Senecal , P. , Richards , K. , Pomraning , E. , Yang , T. et al. A New Parallel Cut-Cell Cartesian CFD Code for Rapid Grid Generation Applied to In-Cylinder Diesel Engine Simulations SAE Technical Paper 2007-01-0159 2007 10.4271/2007-01-0159
  23. Pei , Y. et al. Large eddy simulation of a reacting spray flame with multiple realizations under compression ignition conditions Combustion and Flame 162 12 4442 4455 2016 10.1016/j.combustflame.2015.08.010
  24. D’Errico , G. et al. Comparison of well-mixed and multiple representative interactive flamelet approaches for diesel spray combustion modelling Combustion Theory and Modelling 18 1 2014
  25. Yao , T. et al. A reduced model for n-dodecane with optimized semi-global low-temperature chemistry for diesel engine simulations Fuel 2015
  26. Moss , J. , Stewart C. , and Syed K. Flowfield modelling of soot formation at elevated pressure Proceedings of the Combustion Institute 22 1 413 423 1989
  27. Reitz , R. and Diwakar , R. Effect of Drop Breakup on Fuel Sprays SAE Technical Paper 860469 1986 10.4271/860469
  28. Wright , Y.M. et al. Simulations of spray autoignition and flame establishment with two-dimensional CMC Combustion and Flame 143 4 402 419 2005
  29. Wright , Y.M. et al. Experiments and Simulations of n-Heptane Spray Auto-Ignition in a Closed Combustion Chamber at Diesel Engine Conditions Flow Turbulence and Combustion 84 1 49 78 2010
  30. Bolla , M. , Wright Y.M. , and Boulouchos K. Application of a Conditional Moment Closure Combustion model to a large two-stroke marine Diesel engine reference experiment COMODIA Fukuoka, Japan July 23-26, 2012
  31. Bolla , M. , Srna , A. , Wright , Y. , Von Rotz , B. et al. Influence of Injector Diameter (0.2-1.2 mm range) on Diesel Spray Combustion: Measurements and CFD Simulations SAE Technical Paper 2014-01-1419 2014 10.4271/2014-01-1419
  32. Bolla , M. et al. Soot Formation Modeling of n-Heptane Sprays Under Diesel Engine Conditions Using the Conditional Moment Closure Approach Combustion Science and Technology 185 5 766 793 2013 10.1080/00102202.2012.752362
  33. Leung , K.M. , Lindstedt R.P. , and Jones W.P. A Simplified Reaction-Mechanism for Soot Formation in Nonpremixed Flames Combustion and Flame 87 3-4 289 305 1991
  34. Pope , S.B. Computationally efficient implementation of combustion chemistry using in situ adaptive tabulation Combustion Theory and Modelling 1 1 41 63 1997
  35. Amsden , A. Kiva-3v, Release 2, Improvements to Kiva-3v 1999 Los Alamos National Laboratory
  36. Wang , B.-L. et al. A generalized renormalization group turbulence model and its application to a light-duty diesel engine operating in a low-temperature combustion regime International Journal of Engine Research 14 3 279 292 2013 10.1177/1468087412465379
  37. Reitz , R.D. Modeling atomization processes in high-pressure vaporizing sprays Atomisation Spray Technology 3 309 337 1987
  38. Patterson , M. and Reitz , R. Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and Emission SAE Technical Paper 980131 1998 10.4271/980131
  39. Wang , H. et al. Development of a reduced n-dodecane-PAH mechanism and its application for n-dodecane soot predictions Fuel 136 25 36 2014 10.1016/j.fuel.2014.07.028
  40. Vishwanathan , G. and Reitz R.D. Development of a Practical Soot Modeling Approach and Its Application to Low-Temperature Diesel Combustion Combustion Science and Technology 182 8 1050 1082 2010 10.1080/00102200903548124
  41. Wang , H. et al. Development of an n-heptane-nbutanol-PAH mechanism and its application for combustion and soot prediction Combustion and Flame 160 3 504 519 2013
  42. Pope , S. PDF methods for turbulent reactive flows Progress in Energy and Combustion Science 11 2 119 192 1985
  43. Chishty , M. , Bolla , M. , Pei , Y. , Hawkes , E. et al. Soot Formation Modelling of Spray-A Using a Transported PDF Approach SAE Technical Paper 2015-01-1849 2015 10.4271/2015-01-1849
  44. Pei , Y. et al. Modelling n-dodecane spray and combustion with the transported probability density function method Combustion and Flame 162 5 2006 2019 2015
  45. Pickett , L. , Manin , J. , Genzale , C. , Siebers , D. et al. Relationship Between Diesel Fuel Spray Vapor Penetration/Dispersion and Local Fuel Mixture Fraction SAE Int. J. Engines 4 1 764 799 2011 10.4271/2011-01-0686
  46. Smyth , K.C. and Shaddix C.R. The elusive history of m∼= 1.57-0.56 i for the refractive index of soot Combustion and Flame 107 3 314 320 1996
  47. Bond , T.C. and Bergstrom R.W. Light absorption by carbonaceous particles: An investigative review Aerosol science and technology 40 1 27 67 2006
  48. Williams , T.C. et al. Measurement of the dimensionless extinction coefficient of soot within laminar diffusion flames International Journal of Heat and Mass Transfer 50 7 1616 1630 2007
  49. Nishigai , H. et al. Morphology of JIS# 2 and Fischer Tropsch Diesel (FTD) Soot Tropsch Diesel (FTD) Soot in Spray Flames via Transmission Electron Microscopy (TEM) COMODIA Fukuoka, Japan July 23-26, 2012
  50. Li , Z. et al. Evolution of the nanostructure, fractal dimension and size of in-cylinder soot during diesel combustion process Combustion and Flame 158 8 1624 1630 2011
  51. Kholghy , M. et al. The evolution of soot morphology in a laminar coflow diffusion flame of a surrogate for Jet A-1 Combustion and Flame 160 10 2119 2130 2013 10.1016/j.combustflame.2013.04.008
  52. Kook , S. and Pickett , L. Soot Volume Fraction and Morphology of Conventional, Fischer-Tropsch, Coal-Derived, and Surrogate Fuel at Diesel Conditions SAE Int. J. Fuels Lubr . 5 2 647 664 2012 10.4271/2012-01-0678
  53. Köylü , Ü.Ö. et al. Simultaneous measurements of soot volume fraction and particle size/microstructure in flames using a thermophoretic sampling technique Combustion and Flame 110 4 494 507 1997
  54. Dalzell , W. and Sarofim A. Optical constants of soot and their application to heat-flux calculations Journal of Heat Transfer 91 1 100 104 1969
  55. Manin , J. , Skeen , S. , Pickett , L. , Kurtz , E. et al. Effects of Oxygenated Fuels on Combustion and Soot Formation/ Oxidation Processes SAE Int. J. Fuels Lubr . 7 3 704 717 2014 10.4271/2014-01-2657
  56. Malbec , L. , Egúsquiza , J. , Bruneaux , G. , and Meijer , M. Characterization of a Set of ECN Spray A Injectors: Nozzle to Nozzle Variations and Effect on Spray Characteristics SAE Int. J. Engines 6 3 1642 1660 2013 10.4271/2013-24-0037
  57. Skeen , S.A. , Manin J. , and Pickett L.M. Simultaneous formaldehyde PLIF and high-speed schlieren imaging for ignition visualization in high-pressure spray flames Proceedings of the Combustion Institute 35 3 3167 3174 2014 10.1016/j.proci.2014.06.040
  58. Engine Combustion Network Data Archive http://www.sandia.gov/ecn/cvdata/dsearch/frameset.php Oct. 2015
  59. Skeen , S. , Manin , J. , and Pickett , L. Visualization of Ignition Processes in High-Pressure Sprays with Multiple Injections of n-Dodecane SAE Int. J. Engines 8 2 696 715 2015 10.4271/2015-01-0799
  60. Bruneaux , G. and Maligne , D. Study of the Mixing and Combustion Processes of Consecutive Short Double Diesel Injections SAE Int. J. Engines 2 1 1151 1169 2009 10.4271/2009-01-1352
  61. Bolla , M. et al. Influence of turbulence-chemistry interaction for n-heptane spray combustion under diesel engine conditions with emphasis on soot formation and oxidation Combustion Theory and Modelling 18 2 330 360 2014
  62. Bolla , M. et al. An Extended CMC Model for the Simulation of Diesel Engines with Multiple Injections International Multidimensional Engine Modeling Users' Group Meeting Detroit, Michigan April 7, 2014

Cited By

Recommended Content

Technical Paper Numerical Investigation of Soot Emission in Direct-Injection Spark-Ignition Engines Using a Detailed Soot Model Framework
Technical Paper Reduced Kinetic Mechanisms for Diesel Spray Combustion Simulations
Technical Paper Experimental Validation of an FSAE Engine Model