This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Numerical and Experimental Assessment of a Solenoid Common-Rail Injector Operation with Advanced Injection Strategies

Journal Article
2016-01-0563
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 05, 2016 by SAE International in United States
Numerical and Experimental Assessment of a Solenoid Common-Rail Injector Operation with Advanced Injection Strategies
Sector:
Citation: Piano, A., Millo, F., Postrioti, L., Biscontini, G. et al., "Numerical and Experimental Assessment of a Solenoid Common-Rail Injector Operation with Advanced Injection Strategies," SAE Int. J. Engines 9(1):565-575, 2016, https://doi.org/10.4271/2016-01-0563.
Language: English

References

  1. Heywood J. Internal combustion engine fundamentals New York McGraw-Hill Book Co. 1988
  2. Zhao H. Advanced direct injection combustion engine technologies and development, Volume 2: Diesel engine Woodhead Publishing 2010
  3. Mahr B. Future and potential of diesel injection system Thermo- and Fluid Dynamic Processes in Diesel Engines 2 3 17 2004 10.1007/978-3-662-10502-3_1
  4. Baumgarten C. Mixture formation in internal combustion engine Springer-Verlag 2006 10.1007/3-540-30836-9
  5. Matsumoto S. , Date K. , Taguchi T. and Herrmann O. The new DENSO common rail diesel solenoid injector MTZ worldwide 74 44 48 2013 10.1007/s38313-013-0018-3
  6. Keskinen , K. , Kaario , O. , Tilli , A. , Hulkkonen , T. et al. Improving the Accuracy of 1-D Fuel Injection Modeling SAE Technical Paper 2012-01-1256 2012 10.4271/2012-01-1256
  7. Zeuch W. Neue Verfahren zur Messung des Einspritzgesetzes und der Einspritz-Regelmaessigkeit von Diesel-Einspritzpumpen MTZ 22 9 415 420 1961
  8. Takamura , A. , Ohta , T. , Fukushima , S. , and Kamimoto , T. A Study on Precise Measurement of Diesel Fuel Injection Rate SAE Technical Paper 920630 1992 10.4271/920630
  9. Ikeda , T. , Ohmori , Y. , Takamura , A. , Sato , Y. et al. Measurement of the Rate of Multiple Fuel Injection with Diesel Fuel and DME SAE Technical Paper 2001-01-0527 2001 10.4271/2001-01-0527
  10. Salvador F. , Marti-Aldaravi , P. , Carreres , M. , and Jaramillo , D. An Investigation on the Dynamic Behaviour at Different Temperatures of a Solenoid Operated Common-Rail Ballistic Injector by means of a One-Dimensional Model SAE Technical Paper 2014-01-1089 2014 10.4271/2014-01-1089
  11. Payri R. , Climent H. , Salvador F. and Favennec A. Diesel injection system modelling. Methodology and application for a first-generation common rail system Proceedings of the Institution of Mechanical Engineering Part D Journal Of Automobile Engineering 218 1 81 91 2004 10.1243/095440704322829191
  12. Payri R. , Salvador F. , Gimeno J. and Morena J. D. l. Influence of injector technology on injection and combustion development - Part 1: Hydraulic characterization Applied Energy 88 1068 1074 2011 10.1016/j.apenergy.2010.10.012
  13. Carmignato S. Computed tomography as a promising solution for industrial quality control and inspection castings Metallurgic Science and Technology 30 1 5 14 2012
  14. Hessler J. Computed tomography SAE Off-Highway Engineering Online 2012
  15. Postrioti L. , Malaguti S. , Bosi M. , Buitoni G. e. al. Experimental and numerical characterization of a direct solenoid actuation injector for Diesel engine applications Fuel 118 316 328 2014 10.1016/j.fuel.2013.11.001
  16. Postrioti L. , Buitoni G. , Pesce F. and Ciaravino C. Zeuch method-based injection rate analysis of a common-rail system operated with advanced injection strategies Fuel 128 188 198 2014 10.1016/j.fuel.2014.03.006
  17. Bonandrini , G. , Di Gioia , R. , Venturoli , L. , Papaleo , D. et al. Medium Pressure Injection System for Small Diesel Engine Application: Numerical Simulation and Experimental Results SAE Technical Paper 2014-32-0134 2014 10.4271/2014-32-0134
  18. ISO 4113 2010 Road vehicles - Calibration fluids for diesel injection equipment
  19. Ciesla , C. , Keribar , R. , and Morel , T. Engine/Powertrain/Vehicle Modeling Tool Applicable to All Stages of the Design Process SAE Technical Paper 2000-01-0934 2000 10.4271/2000-01-0934
  20. GT-Suite User Manual - Flow
  21. Leonhard R. , Warga J. , Pauer T. , Ruckle M. e. al. Solenoid common-rail injector for 1800 bar MTZ worldwide 2 71 10 15 2010 10.1007/BF03227003
  22. von Kuensberg Sarre C. , Kong , S. , and Reitz , R. Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays SAE Technical Paper 1999-01-0912 1999 10.4271/1999-01-0912

Cited By