This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Model-Based Control-Oriented Combustion Phasing Feedback for Fast CA50 Estimation

Journal Article
2015-01-0868
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 14, 2015 by SAE International in United States
Model-Based Control-Oriented Combustion Phasing Feedback for Fast CA50 Estimation
Sector:
Citation: Zhu, Q., Wang, S., Prucka, R., Prucka, M. et al., "Model-Based Control-Oriented Combustion Phasing Feedback for Fast CA50 Estimation," SAE Int. J. Engines 8(3):997-1004, 2015, https://doi.org/10.4271/2015-01-0868.
Language: English

References

  1. Caton , J.A. Combustion phasing for maximum efficiency for conventional and high efficiency engines Energy Conversion and Management 77 564 576 2014 10.1016/j.enconman.2013.09.060
  2. Zhu , G. , Daniels , C. , and Winkelman , J. MBT Timing Detection and its Closed-Loop Control Using In-Cylinder Pressure Signal SAE Technical Paper 2003-01-3266 2003 10.4271/2003-01-3266
  3. Rassweiler , G. and Withrow , L. Motion Pictures of Engine Flames Correlated with Pressure Cards SAE Technical Paper 380139 1938 10.4271/380139
  4. Song , J. and Sunwoo , M. Flame kernel formation and propagation modelling in spark ignition engines Proceedings of the Institution of Mechanical Engineers , Part D: Journal of Automobile Engineering 2001 10.1243/0954407011525494
  5. Shrestha , S. and Karim , G. A Predictive Model for Gas Fueled Spark Ignition Engine Applications SAE Technical Paper 1999-01-3482 1999 10.4271/1999-01-3482
  6. Lafossas , F. , Colin , O. , Le Berr , F. , and Menegazzi , P. Application of a New 1D Combustion Model to Gasoline Transient Engine Operation SAE Technical Paper 2005-01-2107 2005 10.4271/2005-01-2107
  7. Richard , S. , Bougrine , S. , Font , Lafossas , G. F. and Berr , F. L. On the reduction of a 3d cfd combustion model to build a physical 0d model for simulating heat release, knock and pollutants in SI engines Oil Gas Science Technology - Rev. IFP 64 3 223 242 2009 10.2516/ogst/2008055
  8. Le Berr , F. , Miche , M. , Le Solliec , G. , Lafossas , F. et al. Modelling of a Turbocharged SI Engine with Variable Camshaft Timing for Engine Control Purposes SAE Technical Paper 2006-01-3264 2006 10.4271/2006-01-3264
  9. Lee , T.K. , Kramer , D. and Filipi , Z. High-degree-of-freedom engine modelling for control design using a crank-angle-resolved flame propagation simulation and artificial network surrogate models Journal of Systems and Control Engineering 2010 10.1243/09596518JSCE908
  10. Bougrine , S. , Richard , S. , and Veynante , D. Modelling and Simulation of the Combustion of Ethanol blended Fuels in a SI Engine using a 0D Coherent Flame Model SAE Technical Paper 2009-24-0016 2009 10.4271/2009-24-0016
  11. Hall , C.M. , Shaver , G.M. , Chauvin , J. and Petit , N. Combustion phasing model for control of a gasoline-ethanol fueled SI engine with variable valve timing in Proc. of 2012 American Control Conference 1271 1277 Montreal, QC June 2012
  12. Ghazimirsaied , A. , Shahbakhti , M. and Koch , C.R. Nonlinear dynamics in cyclic variations of combustion phasing in an HCCI engine in Proc. of the ASME Internal Combustion Engine Division 2009 Spring Conference Milwaukee, Wisconsin, USA May 2009 10.1115/ICES2009-76157
  13. Ravi , N. , Roelle , M.J. , Jungkunz , A.F. and Gerdes , J.C. A physically based two state model for controlling exhaust recompression HCCI in gasoline engines in Proc. of the 2006 ASME International Mechanical Engineering Congress and Exposition Chicago, Illinois, USA Nov. 2006 10.1115/IMECE2006-15331
  14. The Analytic Sciences Corporation Gelb , A. Applied Optimal Estimation the M.I.T. Press Cambridge, Massachusetts and London 1974
  15. Kalman , R.E. A New Approach to Linear Filtering and Prediction Problems Journal of Basic Engineering 82D 35 45 1960
  16. Ravi , N. , Roelle , M.J. and Gerdes , J. C. Controller-observer implementation for cycle-by-cycle control of an HCCI engine in Proc. of 2007 ASME International Mechanical Engineering Congress and Exposition Seattle, Washington, USA Nov. 2007 10.1115/IMECE2007-42371
  17. Chiang , C.J. and Stefanopoulou , A.G. Control of thermal ignition in gasoline engines in Proc. of American Control Conference 2005 3871 3876
  18. Shaver , G. , Roelle , M. and Gerdes , J. Decoupled control of combustion timing and work output in residual-affected HCCI engines in Proc. Amer. Control Conf. 2005 3871 3876
  19. Bengtsson , J. , Strandh , P. , Johansson , R. , Tunestål , P. et al. Multi-Output Control of a Heavy Duty HCCI Engine Using Variable Valve Actuation and Model Predictive Control SAE Technical Paper 2006-01-0873 2006 10.4271/2006-01-0873
  20. Patterson , G. and Davis , R. Geometric and Topological Considerations to Maximize Remotely Mounted Cylinder Pressure Transducer Data Quality SAE Int. J. Engines 2 1 414 420 2009 10.4271/2009-01-0644
  21. Schten , K. , Ripley , G. , Punater , A. , and Erickson , C. Design of an Automotive Grade Controller for In-Cylinder Pressure Based Engine Control Development SAE Technical Paper 2007-01-0774 2007 10.4271/2007-01-0774
  22. Zhu , Y. Efficient recursive state estimator for dynamic systems without knowledge of noise covariances IEEE Transactions on Aerospace and Electronic Systems 35 1 102 114 1999 10.1109/7.745684
  23. Bicer , C. , Babacan , E.K. and Ozbek , L. Stability of the adaptive fading extended Kalman filter with the matrix forgetting factor Turkish Journal Electrical Engineering and Computer Sciences 20 5 819 833 2012 10.3906/elk-1008-673
  24. Lee , T-K. , Prucka , R.G. and Filipi , Z.S. Real-time estimation of combustion variability for model-based control and optimal calibration of spark ignition engines Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 223 11 1361 1372 2009 10.1243/09544070JAUTO1234

Cited By