This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Load Limit Extension in Pre-Mixed Compression Ignition Using a 2-Zone Combustion System

Journal Article
2015-01-0860
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 14, 2015 by SAE International in United States
Load Limit Extension in Pre-Mixed Compression Ignition Using a 2-Zone Combustion System
Sector:
Citation: Bergin, M., Reitz, R., Rutland, C., Dempsey, A. et al., "Load Limit Extension in Pre-Mixed Compression Ignition Using a 2-Zone Combustion System," SAE Int. J. Engines 8(2):903-920, 2015, https://doi.org/10.4271/2015-01-0860.
Language: English

References

  1. Kokjohn , S. , Hanson , R. , Splitter , D. , and Reitz , R. Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending SAE Int. J. Engines 2 2 24 39 2010 10.4271/2009-01-2647
  2. Kawanabe , H. , Kojima , H. , and Ishiyama , T. Modeling of the Auto-ignition Process of a Non-homogeneous Mixture in a Diesel Spray for CFD SAE Technical Paper 2010-01-0357 2010 10.4271/2010-01-0357
  3. Kokjohn S. L. , Hanson R. L. , Splitter D. A. , and Reitz R. D. Fuel reactivity controlled compression ignition (RCCI): a pathway to controlled high-efficiency clean combustion International Journal of Engine Research 2011 12 209 10.1177/1468087411401548
  4. Hanson , R. , Splitter , D. , and Reitz , R. Operating a Heavy-Duty Direct-Injection Compression-Ignition Engine with Gasoline for Low Emissions SAE Technical Paper 2009-01-1442 2009 10.4271/2009-01-1442
  5. Splitter , D. , Hanson , R. , Kokjohn , S. , and Reitz , R. Reactivity Controlled Compression Ignition (RCCI) Heavy-Duty Engine Operation at Mid-and High-Loads with Conventional and Alternative Fuels SAE Technical Paper 2011-01-0363 2011 10.4271/2011-01-0363
  6. Prikhodko , V. , Curran , S. , Barone , T. , Lewis , S. et al. Emission Characteristics of a Diesel Engine Operating with In-Cylinder Gasoline and Diesel Fuel Blending SAE Int. J. Fuels Lubr. 3 2 946 955 2010 10.4271/2010-01-2266
  7. Bergin , M. , Dempsey , A. , Curran , S. , Reitz , R. et al. Load Limit Extension in Pre-Mixed Compression Ignition Using a 2-zone Combustion System SAE Int. J. Engines 8 2 903 920 2015 10.4271/20154-01-0860
  8. Curran , S. , Prikhodko , V. , Cho , K. , Sluder , C. et al. In-Cylinder Fuel Blending of Gasoline/Diesel for Improved Efficiency and Lowest Possible Emissions on a Multi-Cylinder Light-Duty Diesel Engine SAE Technical Paper 2010-01-2206 2010 10.4271/2010-01-2206
  9. Curran , S. , Gao , Z. , and Wagner , R. Reactivity Controlled Compression Ignition Drive Cycle Emissions and Fuel Economy Estimations Using Vehicle Systems Simulations with E30 and ULSD SAE Int. J. Engines 7 2 902 912 2014 10.4271/2014-01-1324
  10. Hanson , R. , Curran , S. , Wagner , R. , Kokjohn , S. et al. Piston Bowl Optimization for RCCI Combustion in a Light-Duty Multi-Cylinder Engine SAE Int. J. Engines 5 2 286 299 2012 10.4271/2012-01-0380
  11. Amsden , A.A. KIVA-3V, Release 2, improvements to KIVA-3V Los Alamos National Laboratory Report No. LA-13608-MS 1999
  12. Abani , N. , Kokjohn , S. , Park , S. , Bergin , M. et al. An Improved Spray Model for Reducing Numerical Parameter Dependencies in Diesel Engine CFD Simulations SAE Technical Paper 2008-01-0970 2008 10.4271/2008-01-0970
  13. Abani , N. , Munnannur , A. and Reitz , R.D. Reduction of Numerical Parameter Dependencies in Diesel Spray Models ASME Internal Combustion Engine Division 2007 Fall Technical Conference 130 3 2008
  14. Beale , J.C. and Reitz , R.D. Modeling Spray Atomization with the Kelvin-Helmholtz / Rayleigh-Taylor Hybrid Model Atomization and Sprays 9 623 650 1999
  15. Han , Z. and Reitz , R.D. Turbulence Modeling of Internal Combustion Engines Using RNG k-ε Models Combustion Science and Technology 106 1995
  16. Ra , Y. and Reitz , R.D. A Reduced Chemical Kinetic Model for IC Engine Combustion Simulations with Primary Reference Fuels Combustion and Flame 2008
  17. Hiroyasu , H. and Kadota , T. Models for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Diesel Engines SAE Technical Paper 760129 1976 10.4271/760129
  18. Sun , Y. Diesel Combustion Optimization and Emissions Reduction Using Adaptive Injection Strategies (AIS) with Improved Numerical Models Ph.D. Thesis Engine Research Center, University of Wisconsin--Madison 2007
  19. O'Rourke , P. and Amsden , A. A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines SAE Technical Paper 961961 1996 10.4271/961961
  20. O'Rourke , P. and Amsden , A. A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model SAE Technical Paper 2000-01-0271 2000 10.4271/2000-01-0271
  21. Dempsey , A. , Walker , N. , and Reitz , R. Effect of Piston Bowl Geometry on Dual Fuel Reactivity Controlled Compression Ignition (RCCI) in a Light-Duty Engine Operated with Gasoline/Diesel and Methanol/Diesel SAE Int. J. Engines 6 1 78 100 2013 10.4271/2013-01-0264
  22. Shahlari , A. , Hocking , C. , Kurtz , E. , and Ghandhi , J. Comparison of Compression Ignition Engine Noise Metrics in Low-Temperature Combustion Regimes SAE Int. J. Engines 6 1 541 552 2013 10.4271/2013-01-1659
  23. Dempsey , A. B. Dual-Fuel Reactivity Controlled Compression Ignition (RCCI) with Alternative Fuels University of Wisconsin-Madison PhD Dissertation (Mechanical Engineering) 2013
  24. Dempsey , A. B. , Walker , N. R. , Gingrich , E. , and Reitz , R. D. Comparison of Low Temperature Combustion Strategies for Advanced Compression Ignition Engines with a Focus on Controllability Combustion Science and Technology 186 2 210 241 2013 10.1080/00102202.2013.858137
  25. Dempsey , A. B. , Curran , S. , Wagner , R. , and Cannella , W. Effect of Premixed Fuel Preparation for Partially Premixed Combusiton with a Low Octane Gasoline on a Light-Duty Multi-Cylinder Compression Ignition Engine Proceedings of the ASME 2014 Internal Combustion Engine Division Fall Technical Conference (ICEF 2014) Columbus, IN 2014
  26. Eng , J. Characterization of Pressure Waves in HCCI Combustion SAE Technical Paper 2002-01-2859 2002 10.4271/2002-01-2859

Cited By