Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Multi-Dimensional-Modeling-Based Development of a Novel 2-Zone Combustion Chamber Applied to Reactivity Controlled Compression Ignition Combustion

Journal Article
2015-01-0840
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2015-01-0840
Published April 14, 2015 by SAE International in United States
Multi-Dimensional-Modeling-Based Development of a Novel 2-Zone Combustion Chamber Applied to Reactivity Controlled Compression Ignition Combustion
Sector:
Citation: Bergin, M., Wickman, D., Rutland, C., and Reitz, R., "Multi-Dimensional-Modeling-Based Development of a Novel 2-Zone Combustion Chamber Applied to Reactivity Controlled Compression Ignition Combustion," SAE Int. J. Engines 8(2):808-820, 2015, https://doi.org/10.4271/2015-01-0840.
Language: English

References

  1. Dec , J. A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging SAE Technical Paper 970873 1997 10.4271/970873
  2. Najt , P. and Foster , D. Compression-Ignited Homogeneous Charge Combustion SAE Technical Paper 830264 1983 10.4271/830264
  3. Shimazaki , N. , Minato , A. and Nishimura , T. Premixed diesel combustion using direct injection near top dead centre International Journal of Engine Research 2007 8 259 10.1243/14680874JER00107
  4. Klingbeil , A. , Juneja , H. , Ra , Y. , and Reitz , R. Premixed Diesel Combustion Analysis in a Heavy-Duty Diesel Engine SAE Technical Paper 2003-01-0341 2003 10.4271/2003-01-0341
  5. Kokjohn , S. , Hanson , R. , Splitter , D. , and Reitz , R. Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending SAE Int. J. Engines 2 2 24 39 2010 10.4271/2009-01-2647
  6. Hanson , R. , Kokjohn , S. , Splitter , D. , and Reitz , R. An Experimental Investigation of Fuel Reactivity Controlled PCCI Combustion in a Heavy-Duty Engine SAE Int. J. Engines 3 1 700 716 2010 10.4271/2010-01-0864
  7. Splitter , D. , Reitz , R. , and Hanson , R. High Efficiency, Low Emissions RCCI Combustion by Use of a Fuel Additive SAE Int. J. Fuels Lubr. 3 2 742 756 2010 10.4271/2010-01-2167
  8. Hanson , R. , Splitter , D. , and Reitz , R. Operating a Heavy-Duty Direct-Injection Compression-Ignition Engine with Gasoline for Low Emissions SAE Technical Paper 2009-01-1442 2009 10.4271/2009-01-1442
  9. Splitter , D. , Hanson , R. , Kokjohn , S. , and Reitz , R. Reactivity Controlled Compression Ignition (RCCI) Heavy-Duty Engine Operation at Mid-and High-Loads with Conventional and Alternative Fuels SAE Technical Paper 2011-01-0363 2011 10.4271/2011-01-0363
  10. Prikhodko , V. , Curran , S. , Barone , T. , Lewis , S. et al. Emission Characteristics of a Diesel Engine Operating with In-Cylinder Gasoline and Diesel Fuel Blending SAE Int. J. Fuels Lubr. 3 2 946 955 2010 10.4271/2010-01-2266
  11. Reitz , R. D. , Hanson , R. M. , Splitter , D. A. , Kokjohn , S. L. Engine combustion control via fuel reactivity stratification U.S. patent 8,616,177 Dec. 31 2013
  12. Wickman , D. D. , Hergart , C.-A. Compression-ignited IC engine and method of operation U.S. patent 7,121,254 Oct. 17 2006
  13. Amsden , A.A. KIVA-3V, Release 2, improvements to KIVA-3V Los Alamos National Laboratory Report No. LA-13608-MS 1999
  14. Abani , N. , Kokjohn , S. , Park , S. , Bergin , M. et al. An Improved Spray Model for Reducing Numerical Parameter Dependencies in Diesel Engine CFD Simulations SAE Technical Paper 2008-01-0970 2008 10.4271/2008-01-0970
  15. Abani , N. , Munnannur , A. and Reitz , R.D. Reduction of Numerical Parameter Dependencies in Diesel Spray Models Journal of Engineering for Gas Turbines and Power 130 3 032809 2008 10.1115/1.2830867
  16. Beale , J.C. and Reitz , R.D. Modeling Spray Atomization with the Kelvin-Helmholtz / Rayleigh-Taylor Hybrid Model Atomization and Sprays 9 6 623 650 1999 10.1615/AtomizSpr.v9.i6.40
  17. Han , Z. and Reitz , R.D. Turbulence Modeling of Internal Combustion Engines Using RNG k-ε Models Combustion Science and Technology 106 4-6 267 295 1995 10.1080/00102209508907782
  18. Ra , Y. and Reitz , R.D. A Reduced Chemical Kinetic Model for IC Engine Combustion Simulations with Primary Reference Fuels Combustion and Flame 155 4 713 738 2008 10.1016/j.combustflame.2008.05.002
  19. Hiroyasu , H. and Kadota , T. Models for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Diesel Engines SAE Technical Paper 760129 1976 10.4271/760129
  20. Sun , Y. and Reitz , R. Adaptive Injection Strategies (AIS) for Ultra-Low Emissions Diesel Engines SAE Technical Paper 2008-01-0058 2008 10.4271/2008-01-0058
  21. O'Rourke , P. and Amsden , A. A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines SAE Technical Paper 961961 1996 10.4271/961961
  22. O'Rourke , P. and Amsden , A. A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model SAE Technical Paper 2000-01-0271 2000 10.4271/2000-01-0271
  23. Hanson , R. , Curran , S. , Wagner , R. , Kokjohn , S. et al. Piston Bowl Optimization for RCCI Combustion in a Light-Duty Multi-Cylinder Engine SAE Int. J. Engines 5 2 286 299 2012 10.4271/2012-01-0380
  24. Curran , S. , Gao , Z. , and Wagner , R. Reactivity Controlled Compression Ignition Drive Cycle Emissions and Fuel Economy Estimations Using Vehicle Systems Simulations with E30 and ULSD SAE Int. J. Engines 7 2 902 912 2014 10.4271/2014-01-1324
  25. Bergin , M. , Dempsey , A. , Curran , S. , Reitz , R. et al. Load Limit Extension in Pre-Mixed Compression Ignition Using a 2-zone Combustion System SAE Int. J. Engines 8 2 903 920 2015 10.4271/20154-01-0860
  26. Eng , J. Characterization of Pressure Waves in HCCI Combustion SAE Technical Paper 2002-01-2859 2002 10.4271/2002-01-2859

Cited By

Recommended Content

Journal Article Effects of Piston Bowl Geometry on Mixture Development and Late-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine
Technical Paper The Effect of Insulated Combustion Chamber Surfaces on Direct-Injected Diesel Engine Performance, Emissions and Combustion
Journal Article Exploring the Effects of the Key Multi-Injection Parameters on Combustion and Emissions in Intelligent Charge Compression Ignition (ICCI) Mode