This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Influence of EGR on Post-Injection Effectiveness in a Heavy-Duty Diesel Engine Fuelled with n-Heptane

Journal Article
2014-01-2633
ISSN: 1946-3936, e-ISSN: 1946-3944
Published October 13, 2014 by SAE International in United States
Influence of EGR on Post-Injection Effectiveness in a Heavy-Duty Diesel Engine Fuelled with n-Heptane
Citation: Pandurangi, S., Frapolli, N., Bolla, M., Boulouchos, K. et al., "Influence of EGR on Post-Injection Effectiveness in a Heavy-Duty Diesel Engine Fuelled with n-Heptane," SAE Int. J. Engines 7(4):1851-1862, 2014, https://doi.org/10.4271/2014-01-2633.
Language: English

References

  1. Musculus , M.P.B. , Miles P.C. , and Pickett L.M. Conceptual models for partially premixed low-temperature diesel combustion Progress in Energy and Combustion Science 2013 39 2-3 246 283
  2. Idicheria , C. and Pickett , L. Soot Formation in Diesel Combustion under High-EGR Conditions SAE Technical Paper 2005-01-3834 2005 10.4271/2005-01-3834
  3. Tree , D.R. and Svensson K.I. Soot processes in compression ignition engines Progress in Energy and Combustion Science 2007 33 3 272 309
  4. O'Connor , J. and Musculus , M. Post Injections for Soot Reduction in Diesel Engines: A Review of Current Understanding SAE Int. J. Engines 6 1 400 421 2013 10.4271/2013-01-0917
  5. O'Connor , J. and Musculus M. Effects of exhaust gas recirculation and load on soot in a heavy-duty optical diesel engine with close-coupled post injections for high-efficiency combustion phasing International Journal of Engine Research 2014 15 421
  6. Hessel , R. , Reitz , R. , Musculus , M. , O'Connor , J. et al. A CFD Study of Post Injection Influences on Soot Formation and Oxidation under Diesel-Like Operating Conditions SAE Int. J. Engines 7 2 694 713 2014 10.4271/2014-01-1256
  7. Tap , F.A. et al. A generalized flame surface density modelling approach for the auto-ignition of a turbulent non-premixed system Combustion Theory and Modelling 2004 8 1 165 193
  8. Hasse , C. and Peters N. A two mixture fraction flamelet model applied to split injections in a DI Diesel engine Proceedings of the Combustion Institute 2005 30 2755 2762
  9. Haworth , D.C. Progress in probability density function methods for turbulent reacting flows Progress in Energy and Combustion Science 2010 36 2 168 259
  10. Barths , H. et al. Simulation of combustion in direct injection diesel engines using a Eulerian particle flamelet model Proceedings of the Combustion Institute 2000 28 1161 1168
  11. Molina , S. , Desantes , J. , Garcia , A. , and Pastor , J. A Numerical Investigation on Combustion Characteristics with the use of Post Injection in DI Diesel Engines SAE Technical Paper 2010-01-1260 2010 10.4271/2010-01-1260
  12. Felsch , C. et al. An extended flamelet model for multiple injections in DI Diesel engines Proceedings of the Combustion Institute 2009 32 2775 2783
  13. Doran , E. , Pitsch , H. , and Cook , D. Multi-Dimensional Flamelet Modeling of Multiple Injection Diesel Engines SAE Technical Paper 2012-01-0133 2012 10.4271/2012-01-0133
  14. Doran , E.M. , Pitsch H. , and Cook D.J. A priori testing of a two-dimensional unsteady flamelet model for three-feed combustion systems Proceedings of the Combustion Institute 2013 34 1317 1324
  15. Kronenburg , A. Double conditioning of reactive scalar transport equations in turbulent nonpremixed flames Physics of Fluids 2004 16 7 2640 2648
  16. Kim , W.T. and Huh K.Y. Numerical Simulation of Spray Autoignition By the First-order Conditional Moment Closure Model Proceedings of the Combustion Institute 2002 29 569 576
  17. Wright , Y.M. et al. Simulations of spray autoignition and flame establishment with two-dimensional CMC Combustion and Flame 2005 143 4 402 419
  18. Wright , Y.M. et al. Experiments and Simulations of n-Heptane Spray Auto-Ignition in a Closed Combustion Chamber at Diesel Engine Conditions Flow Turbulence and Combustion 2010 84 1 49 78
  19. Bolla , M. , Gudmundsson , T. , Wright , Y. , and Boulouchos , K. Simulations of Diesel Sprays Using the Conditional Moment Closure Model SAE Int. J. Engines 6 2 1249 1261 2013 10.4271/2013-01-1618
  20. Borghesi , G. et al. Modeling evaporation effects in conditional moment closure for spray autoignition Combustion Theory and Modelling 2011 15 5 725 752
  21. Wright , Y. , Boulouchos , K. , De Paola , G. , and Mastorakos , E. Multi-dimensional Conditional Moment Closure Modelling Applied to a Heavy-duty Common-rail Diesel Engine SAE Int. J. Engines 2 1 714 726 2009 10.4271/2009-01-0717
  22. De Paola , G. et al. Diesel engine simulations with multi-dimensional conditional moment closure Combustion Science and Technology 2008 180 5 883 899
  23. Bolla , M. et al. Soot Formation Modeling of n-Heptane Sprays Under Diesel Engine Conditions Using the Conditional Moment Closure Approach Combustion Science and Technology 2013 185 5 766 793
  24. Farrace , D. , Bolla , M. , Wright , Y. , and Boulouchos , K. Predicting In-Cylinder Soot in a Heavy-Duty Diesel Engine for Variations in SOI and TDC Temperature Using the Conditional Moment Closure Model SAE Int. J. Engines 6 3 1580 1593 2013 10.4271/2013-24-0016
  25. Bolla , M. et al. Modeling of soot formation in a heavy-duty diesel engine with conditional moment closure Fuel 2014 117 309 325
  26. Bolla , M. , Wright Y.M. , and Boulouchos K. Application of a Conditional Moment Closure Combustion model to a large two-stroke marine Diesel engine reference experiment the 8th International Conference on Modeling and Diagnostics for Advanced Engine Systems (COMODIA) 2012 Fukuoka, Japan
  27. Farrace , D. , Bolla , M. , Wright , Y. , and Boulouchos , K. Numerical Study of the Influence of EGR on In-Cylinder Soot Characteristics in a Heavy-Duty Diesel Engine using CMC SAE Int. J. Engines 7 1 256 268 2014 10.4271/2014-01-1134
  28. Bolla , M. et al. An Extended CMC Model for Multiple Injections in Diesel Engines Combustion Theory and Modelling 2014
  29. Frapolli , N. , Bolla , M. , Boulouchos , K. , and Wright , Y. Simulations of In-cylinder Processes in a Diesel Engine Operated with Multiple-injections Using an Extended CMC Model SAE Technical Paper 2014-01-2571 2014 10.4271/2014-01-2571
  30. Bolla , M. et al. An Extended CMC Model for the Simulation of Diesel Engines with Multiple Injections International Multidimensional Engine Modeling Users' Group Meeting 2014 Detroit, Michigan
  31. CD-adapco STAR-CD 2014 2014 Jan 14 http://www.cd-adapco.com/products/
  32. Reitz , R. and Diwakar , R. Effect of Drop Breakup on Fuel Sprays SAE Technical Paper 860469 1986 10.4271/860469
  33. Bilger , R.W. Conditional Moment Closure for Turbulent Reacting Flow Physics of Fluids a-Fluid Dynamics 1993 5 2 436 444
  34. Klimenko , A.Y. and Bilger R.W. Conditional Moment Closure for Turbulent Combustion Progress in Energy and Combustion Science 1999 25 6 595 687
  35. O'Brien , E.E. and Jiang T.L. The Conditional Dissipation Rate of an Initially Binary Scalar in Homogeneous Turbulence Physics of Fluids a-Fluid Dynamics 1991 3 12 3121 3123
  36. Liu , S. et al. Effects of Strain Rate on High-Pressure Nonpremixed n-Heptane Autoignition in Counterflow Combustion and Flame 2004 137 320 339
  37. Leung , K.M. , Lindstedt R.P. , and Jones W.P. A Simplified Reaction-Mechanism for Soot Formation in Nonpremixed Flames Combustion and Flame 1991 87 3-4 289 305

Cited By