Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Measurement of Diesel Spray Formation and Combustion upon Different Nozzle Geometry using Hybrid Imaging Technique

Journal Article
2014-01-1410
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2014-01-1410
Published April 01, 2014 by SAE International in United States
Measurement of Diesel Spray Formation and Combustion upon Different Nozzle Geometry using Hybrid Imaging Technique
Sector:
Citation: Zhang, A., Montanaro, A., Allocca, L., Naber, J. et al., "Measurement of Diesel Spray Formation and Combustion upon Different Nozzle Geometry using Hybrid Imaging Technique," SAE Int. J. Engines 7(2):1034-1043, 2014, https://doi.org/10.4271/2014-01-1410.
Language: English

References

  1. Iyer , V. and Abraham , J. Penetration and Dispersion of Transient Gas Jets and Sprays Combust. Sci. Technol. 130 1-6 315 334 1997 10.1080/00102209708935747
  2. Pickett , L. , Manin , J. , Genzale , C. , Siebers , D. et al. Relationship Between Diesel Fuel Spray Vapor Penetration/Dispersion and Local Fuel Mixture Fraction SAE Int. J. Engines 4 1 764 799 2011 10.4271/2011-01-0686
  3. Pastor , J. , Payri , R. , Garcia-Oliver , J. , and Nerva , J. Schlieren Measurements of the ECN-Spray A Penetration under Inert and Reacting Conditions SAE Technical Paper 2012-01-0456 2012 10.4271/2012-01-0456
  4. Pickett , L. , Genzale , C. , Bruneaux , G. , Malbec , L. et al. Comparison of Diesel Spray Combustion in Different High-Temperature, High-Pressure Facilities SAE Int. J. Engines 3 2 156 181 2010 10.4271/2010-01-2106
  5. Montanaro , A. , Allocca , L. , Johnson , J. , Lee , S. et al. Influence of the Nozzle Geometry of a Diesel Single-Hole Injector on Liquid and Vapor Phase Distributions at Engine-Like Conditions SAE Technical Paper 2013-24-0038 2013 10.4271/2013-24-0038
  6. Pickett , L. , Kook , S. , and Williams , T. Visualization of Diesel Spray Penetration, Cool-Flame, Ignition, High-Temperature Combustion, and Soot Formation Using High-Speed Imaging SAE Int. J. Engines 2 1 439 459 2009 10.4271/2009-01-0658
  7. Parrish , S. E. and Zink , R. J. Development and Application of an Imaging System to Evaluate Liquid and Vapor Envelopes of Sprays from a Multi-Hole Gasoline Fuel Injector Operating under Engine-Like Conditions Atomization Sprays 22 8 647 661 2012 10.1615/AtomizSpr.2012006215
  8. Idicheria , C. and Pickett , L. Quantitative Mixing Measurements in a Vaporizing Diesel Spray by Rayleigh Imaging SAE Technical Paper 2007-01-0647 2007 10.4271/2007-01-0647
  9. Naber , J. and Siebers , D. Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays SAE Technical Paper 960034 1996 10.4271/960034
  10. Musculus , M. and Kattke , K. Entrainment Waves in Diesel Jets SAE Int. J. Engines 2 1 1170 1193 2009 10.4271/2009-01-1355
  11. Pastor , J. V. , Javier López , J. , García , J. M. and Pastor , J. M. A 1d Model for the Description of Mixing-Controlled Inert Diesel Sprays Fuel 87 13-14 2871 2885 2008 http://dx.doi.org/10.1016/j.fuel.2008.04.017
  12. Desantes , J. M. , Pastor , J. V. , García-Oliver , J. M. and Pastor , J. M. A 1d Model for the Description of Mixing-Controlled Reacting Diesel Sprays Combust. Flame 156 1 234 249 2009 http://dx.doi.org/10.1016/j.combustflame.2008.10.008
  13. Som , S. and Aggarwal , S. K. Effects of Primary Breakup Modeling on Spray and Combustion Characteristics of Compression Ignition Engines Combust. Flame 157 6 1179 1193 2010 http://dx.doi.org/10.1016/j.combustflame.2010.02.018
  14. Siebers , D. Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization SAE Technical Paper 1999-01-0528 1999 10.4271/1999-01-0528
  15. Payri , R. , Garcia , J. , Salvador , F. and Gimeno , J. Using Spray Momentum Flux Measurements to Understand the Influence of Diesel Nozzle Geometry on Spray Characteristics Fuel 84 5 551 561 2005 10.1016/j.fuel.2004.10.009
  16. Payri , R. , Salvador , F. J. , Gimeno , J. and Bracho , G. A New Methodology for Correcting the Signal Cumulative Phenomenon on Injection Rate Measurements Exp. Tech 32 1 46 49 2008 10.1111/j.1747-1567.2007.00188.x
  17. Som , S. , Ramirez , A. I. , Longman , D. E. and Aggarwal , S. K. Effect of Nozzle Orifice Geometry on Spray, Combustion, and Emission Characteristics under Diesel Engine Conditions Fuel 90 3 1267 1276 2011 http://dx.doi.org/10.1016/j.fuel.2010.10.048

Cited By

Recommended Content

Technical Paper Observation of High Pressure Fuel Spray with Laser Light Sheet Method
Technical Paper Development of Highly Precise Injection-Rate Detector Applicable to Piezoelectric Injectors Having the Function of Ultra Multi-Stage Injection
Journal Article Comparison of the Diffusive Flame Structure for Dodecane and OME X Fuels for Conditions of Spray A of the ECN